™ OWNERS MANUAL Model No. 45-0366 48" SLEEVE HITCH ROCK RAKE CAUTION: Read Rules for Safe Operation and Instructions Carefully • • • • Assembly Operation Maintenance Repair Parts the fastest way to purchase parts www.speedepart.com PRINTED IN USA FORM NO. 49419 rev.
TABLE OF CONTENTS SAFETY RULES........................................................... 2 FULL SIZE HARDWARE CHART................................. 3 CARTON CONTENTS.................................................. 3 ASSEMBLY................................................................... 4 OPERATION................................................................. 5 MAINTENANCE/STORAGE......................................... 6 REPAIR PARTS ILLUSTRATION.................................
HARDWARE PACKAGE CONTENTS SHOWN FULL SIZE A C B REF. A B C QTY. 24 24 1 D DESCRIPTION REF. D E F Hex Bolt, 3/8" x 1" Nylock Hex Nut, 3/8" Slotted Hex Nut, 1" QTY. 1 1 1 E DESCRIPTION Cotter Pin Pivot Pin Haircotter Pin CARTON CONTENTS 1. Hitch Assembly 2. Rake Pivot Assembly 3.
ASSEMBLY 2. Align the hitch assembly (pointing in direction shown) and the rake assembly. Place the hitch assembly down onto the threaded stud on the rake assembly and install the 1" slotted hex nut onto the threaded stud. Tighten the nut until it is just snug. See figure 2. TOOLS REQUIRED FOR ASSEMBLY (2) (2) 9/16" Wrenches 1-1/2" Wrenches or 14" Adjustable Wrenches 1" SLOTTED HEX NUT REMOVAL OF PARTS FROM CARTON Remove all parts and hardware packages from the carton.
OPERATION 4. Lock the rake assembly in the straight ahead position by installing the pivot pin through the hole in the rear of the hitch assembly. Secure the pivot pin using the hair cotter pin. See figure 4. ATTACHING AND REMOVING RAKE CAUTION: Use care when working around a raised rake. Keep hands and feet out from under the rake at all times. Serious injury can result should the rake drop unexpectedly.
MAINTENANCE ADJUSTING ANGLE OF RAKE 5. The rake can be angled 24 degrees in either direction as shown in figure 6. To change the angle: a. Raise the rake so that the tines of the rake are off the ground. b. Remove the pivot pin from the hitch assembly. c. Pivot the rake assembly to the right or the left. d. Align the hole in the pivot plate with the hole in the hitch assembly. Install the pivot pin through the aligned holes and secure with the haircotter pin.
REPAIR PARTS FOR MODEL 45-0366 SLEEVE HITCH ROCK RAKE 9 1 8 4 5 7 3 2 6 REF. NO. PART NO. QTY. 1 2 3 4 5 65063 64780 25165 48978 HA21362 1 1 24 1 24 DESCRIPTION Hitch Assembly Rake Pivot Assembly Rake Tine Pivot Pin Hex Nut, 3/8-16 (Nylock) REF. NO. PART NO. QTY. 6 7 8 9 43001 43343 48968 46855 49419 24 1 1 1 1 DESCRIPTION Hex Bolt, 3/8-16 x 1" Hair Cotter Pin, 1/8" Slotted Hex Nut, 1"-8 Cotter Pin, 3/16" x 2" Owner's Manual the fastest way to purchase parts www.speedepart.
the fastest way to purchase parts www.speedepart.com © 2005 Agri-Fab, Inc. REPAIR PARTS Agri-Fab, Inc. 809 South Hamilton Sullivan, IL. 61951 217-728-8388 www.agri-fab.
