Agri-Fab ® OWNER'S MANUAL Model No. 45-0353 3-POINT CAUTION: Read Rules for Safe Operation and Instructions Carefully • • • • • HITCH TRAILER Safety Assembly Operation Maintenance Parts www.speedepart.com PRINTED IN USA FORM NO.
SAFETY RULES Remember, any power equipment can cause injury if operated improperly or if the user does not understand operate the equipment. Exercise caution at all times when using power equipment. & IMPORTANT SAFETY PRECAUTIONS. IT MEANS - ATTENTION! BECOME ALERT! LOOK FOR THIS SYMBOL TO POINT OUT YOUR SAFETY IS INVOLVED. 1. 2. 3. 4. 5. 6. 7. Read this owner's manual and your vehicle's owner's manual before using this equipment.
SHOWN FULL SIZE F H / M I I --- / CCP / O / NOT SHOWN FULL SIZE R / / /s U _O V t 0 W X PARTS PACKAGE KEY A B C D E F G H I J K L QTY. 1 1 2 3 1 4 2 2 1 3 5 2 CONTENTS - PARTS SHOWN ACTUAL DESCRIPTION Screw, #8 x 3/8" Screw, #6 x 3/4" Hex Bolt, 5/16" x 1" Lg. Hex Bolt, 1/4" x 1-3/4" Lg. Hex Bolt, 3/8" x 1-3/4" Lg. Hex Bolt, 3/8" x 2-1/2" Lg. Hex Bolt, 1/2" x 2-3/4" Lg.
ASSEMBLY TOOLS TRAILER FRAME ASSEMBLY REQUIRED FOR ASSEMBLY 7/1 6" Wrenches 1/2" Wrenches 9/1 6" Wrenches 3/4" Wrenches or 10" Adjustable Pliers Grease Gun (2) (1) (2) (2) (1) (1) HEIGHT ADJUST / Wrenches / / / Remove all loose parts and the hardware package from the shipping carton. Lay out and identify each part and the common hardware as shown on pages 2 and 3. Be sure the carton is empty before discarding.
. Install the hitch anchors onto the ends of the trailer frame. The clevis pin hole should be to the inside. Secure with four 3/8" x 2-1/2" hex bolts and . Install a quick attach pin in the slot of each hitch anchor. Secure with a haircotter pin. See figure 4. . HITCH QUICK ANCHOBB _Z 3/8" x 2- CLEVIS ATTACH PIN PIN .
ELECTRICAL CONNECTIONS FOR THE WINCH BEFORE REFER TO THE INSTRUCTION ELECTRICAL CONNECTIONS. 1. Connect the wires in the drawbar and black to NOTE: tf the winch terminals are not marked and negative, you will need to check the of rotation after you complete the wiring Reverse the winch hookup if the cable when it should wind out. positive direction hookup. winds in NOTE: The reclosable straps can be used instead of the clips for attaching the switch and quick connector to the vehicle. 5.
OPERATION ,_ CONNECTING WIRE ROPE WHEN WINCH IS KEEP CLEAR OF WINCH AND UNDER LOAD. The 3-Point Hitch Trailer is only designed for towing category 0 or 1 attachments. The total working weight of any attachment must not exceed 400 pounds. When the hitch trailer is attached to the tow vehicle, the hitch pin used to connect the trailer to the vehicle hitch must be secured with the haircotter pin. Failure to use the haircotter pin could result in the hitch trailer disconnecting from the tow vehicle.
LEVELING ADJUSTMENT ATTACHMENTADJUSTMENT Use the switch on the tow vehicle WITH ATTACHMENT RAISED! PERDO NOTINJURY ADJUST SONAL CANTRAILER RESULT. HEIGHT _ The trailer height must be adjusted after the trailer is attached to the vehicle to obtain the best performance out an attached implement. to raise or lower the attachment. Push the "rope in" button on the switch to raise the attachment. Push the "rope out" button on the switch to lower the attachment.
NOTES
REPAIR PARTS FOR 3-POINT MODEL HITCH NO.
REPAIR PARTS FOR MODEL NO. 45-0353 3-POINT HITCH TRAILER REF. NO. PART NO. QTY. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 HA21362 43343 64778 48967 43432 49383 49385 47397 49384 65040 65039 43086 43063 WW2000V12 43513 23353 5 7 2 2 4 1 1 2 1 1 1 2 2 1 2 2 DESCRIPTION REF. NO. PART NO. QTY. Hex Nut, Nylock, 3/8" Haircotter Pin, 1/8" x 2-3/8" Hitch Anchor Assembly Quick Attach Pin Hex Bolt, 3/8"-16 x 2-1/2" Lg.
© 2004Agri-Fab,Inc. REPAIRPARTS Agri-Fab,Inc. 303 WestRaymond Sullivan,IL61951 217-728-8388 www.agri-fab.
