Quick Start Guide

Built to Endure
AGM H3
Quick Start Guide
Features of the product and its accessories described herein
rely on the software, phone internal memory and local
networks, and may not be activated or may be limited by local
network operators or service providers. Therefore, the
descriptions herein may not exactly match the purchased
product or its accessories. The manufacturer reserves the rights
to change or modify any information or specifications contained
in this manual without prior notice or obligation. The
manufacturer is not responsible for the legitimacy or quality of
any products that you may upload or download through this
device including but not limited to text, images, music, movies,
and non-integral software. Any consequences arising from the
usage of the preceding products on this device is the
responsibility of the user.
1
1
2
3
4
5
6
7
8
9
10
18
19
11
14
15
16
17
12
13
ABOUT AGM H3
20
21
22
17. NFC area
(*Variant dependent. Some versions may not have NFC)
16. Fingerprint
---Fingerprint sensor
(*Variant dependent. Some versions may not have Fingerprint)
15.Macro Camera
BASIC DESCRIPTION
1. Ejector hole
---Metal PIN hole to open the SIM/SD tray.
2. SIM/SD tray
---Supports Nano SIM and Micro SD card.
3. USB Type-C and Rubber Cover
---USB Type-C connector.
4. Sensor
---Optical proximity sensor and Ambient light sensor.
5. Receiver
---Waterproof receiver. Do not touch with hard pin.
6. Camera key
---Long press to quickly activate the camera.
Short press to take a photo or video when camera is on
7. Display
---5.7inch display.
8. Box Speaker
---Front loading speaker, do not cover or touch with hard pin.
9. Main MIC
---Waterproof MIC. Do not touch with hard pin.
10. Front Camera
---Takes front facing photos.
11. Volume up key
--- Press to increase the phone volume.
12. Volume down key
--- Press decrease the phone volume.
Press to mute the phone during an incoming call.
13. Power key
--- Long press power key to power phone on/off
Short press power key to lock/unlock the screen.
14.Night Vision Camera
19. Main Camera
---Takes photos and videos.
18. Sub MIC
---Noise reducing waterproof MIC, do not touch with hard pin.
2
3
Useful tips:
1. In case the system stops working, press and hold
down the power button until your device vibrates then
hearing damage.
Waterproof warning:
1. AGM H3 is IP68 certified.
2. USB rubber cover and SIM tray must be completely
should restore the audio to the correct position.
4. Please do not use any other method, hairdryers for
closed to prevent water damage
3. If the phone does come in to contact with water, it
example, other than that listed above to dry your
phone as this will affect the phones performance.
5. If you phone has received a strong shock or has been
may affect the audio for a short period. In this case
release.
2. Do not cover Receiver, Main MIC and Sub MIC.
3. Adjust the volume to a comfortable level to prevent
please dry the phone using a clean cloth and then
allow it to stand and dry naturally for 30 minutes. This
bent or twisted ensure that it does not come in to
contact with water.
---With waterproof film, do not cover or touch with hard pin
21. LED
---LED flash light.
22. Air balance hole
20.Infrared fill light
2. Nano-SIM and Micro SD card socket can only be used for
either Nano-SIM or Micro SD card. Place the Nano-SIM
vertically or place Micro SD card horizontally.
The AGM H3 supports dual SIM dual standby but single pass.
This means that you cannot use both SIM cards for calls or data
services simultaneously.
4. Place Nano-SIM or Micro SD card in outside position.
5. Make sure that the Nano-SIM and Micro SD card metal
contact parts are facing down and that the cut corner aligned
with tray in the correct position as per the diagram shown
above.
SIM Tips:
1. The AGM H3 does not support 2 SIM cards data services
working together. When inserting 2 SIM cards, you can only
choose one of the 2 SIM cards to use 4G services.
Installing the SIM and Micro SD card:
1. Use the metal ejector pin provided to open the SIM tray.
2. Pull out the SIM tray.
3. Place Nano-SIM in inside position.
1 2
3
or
PREPARING TO INSTALL THE
SIM/MICRO SD CARD
4
5
3. Do not insert or remove the tray when your phone is powered
on.
BATTERY AND CHARGING
Note: The AGM H3 battery is not removable
Standby time:
1. The AGM H3 standby time is dependent on different working
environments.
2. A Phone receiving a weak network signal and operating at
low temperature will have a shortened standby time.
3. Screen brightness, system settings, games, music, video,
location services, camera, Bluetooth, Wi-Fi and applications
consume the most battery power.
LTE-TDD:B38/39/40/41
LTE-FDD:B1/2/3/4/5/7/8/12/13/17/18/19/20/25/26/28A/28B/66
WCDMA:B1/2/4/5/8
GSM:850/900/1800/1900
Network frequency band
4. Make sure the cards are correctly aligned and the tray is
level before inserting it into the phone.
5. SIM card adapter. A cut SIM card or any other non-standard
cards are not allowed. Those non-standard cards may not be
recognized by the phone and can damage the tray.
Micro SD Tips:
1. Do not remove the Micro SD card while using the phone, as
the card may be damaged. AGM will not be held responsible for
any subsequent data loss or card damage resulting from this
action.
2. Power off the phone before installing or removing the Micro
SD card.
3. Please note that AGM does not provide Micro SD cards.
6
AGM H3 supports CE/CB/FCC/CCC/EAC or equivalent
certified chargers.
adapter in the box.
Charging the phone:
1. Plug the USB Type-C cable into the phone.
2. Connect the USB power cable to the charging power adapter.
Some version AGM H3 does not come along with a power
6. Please note that the battery will still discharge itself even
when the phone is not in use and switched off. If you plan to
not use the unit for an extended period, you should still charge
it a least every two months to prevent complete power loss and
to protect your data.
5. Please use the certified charger and cable to ensure
maximum performance and safety
The recommended charger output is 5V/1A or 5V/2A.
Uncertified equipment may cause damage to the device or
cause batteries to explode.
3. Open the USB Type-C port cover and connect the USB
power cable to the port. Be careful not to use excessive force
when plugging the cable. Any damage caused by attempting to
insert the connector incorrectly is not covered by the warranty.
4. Plug the charger into an AC mains socket.
5. When charging is complete remove the cable from the
device, then unplug the power adapter from the mains socket.
Close the USB port cover on the device.
Tips:
1. Fully charge the battery straight from the box, switching off
the power when battery indicator shows full. Please do not
leave the phone on charge when full as this may damage the
battery and affect performance.
2. Disconnect the charger from mains power supply when not in
use.
3. In the event of a fully discharged battery, please charge the
phone for at least 15 minutes before powering it on.
4. The optimum working temperature for the AGM H3 is from
0℃-40℃. Charging the phone outside this temperature range
will damage the battery and shorten battery life.
7
3. Disable data connection when not use.
2. Touch the SIM card icon to enable data connection.
1. Touch the Settings icon to enter the Settings menu.
Enabling Data:
2. Touch the WIFI icon to enable or disable WIFI.
1. Touch the Settings icon to enter Settings menu.
WIFI Connection:
2. If you have already signed into an Email account during
setup, your email will be synchronized to your device.
Otherwise, add an email address now.
1. Touch the Email icon on the Home or All Apps screen.
Send an email:
3. At the top of the screen, enter a phone number or select a
contact. Type your message, then send.
Making a call:
1. Touch the phone icon on home screen.
2. Open dial pad and input phone number.
3. Touch the call record icon to check call records.
4. Touch contact icon to check contact menu.
Sending an SMS:
1. Touch the message icon on home screen.
2. Create a new message.
FREQUENTLY USED FUNCTIONS
Lock/Unlock the screen:
Press the POWER key.
The phone screen will be locked when the phone is not in use
Unlocking the phone:
Press the POWER key to unlock the screen and slide the
screen up to unlock the phone.
Taking a Screenshot:
Press the POWER key and VOLUME DOWN key at the same
time.
1. Touch the Settings icon to enter Settings menu.
Discover, listen to, and share music on your device.
YT Music
Find your location on the map, search for locations, and view
location information for various Places.
Maps
Send or receive emails via the Google gmail service.
Gmail
Search for information and browse webpages.
5. Touch the video icon to shoot a video.
4. Touch the view icon to check photo or video history.
3. Touch the switch icon to switch rear and front camera.
2. Touch the shot icon to take a photo.
1. Touch the Camera icon to activate camera menu.
Taking a Photo:
4. Press and Hold the language you have chosen and move to
top.
3. Touch Add icon to choose your language.
2. Touch the Language icon and select Language.
2. Touch Location icon to turn on/off location services.
3. Turn off Location Services to save power when not in use.
Chrome
region or service provider.
Tips:Some apps may not be available or may be labelled
differently depending on the
To view more app information, access each apps in the help
menu.
Google provides entertainment, social network, and business
apps. You may require a Google account to access some apps.
Refer to Accounts for more information.
Location Services:
1. Touch Settings icon to enter Settings menu.
Adding a Language:
Google apps
8 9
Copyright © AGM Group Limited
This device complies with the essential requirements and other
provisions contained in Directive 2014/53/EU.
COMPLIANCE
AGM is not responsible for any 3rd parties’ application data.
Please install only officially released applications for the AGM
H3.
WARNING
DOES NOT CONSTITUTE ANY KIND OF WARRANTY.
THIS DOCUMENT IS FOR INFORMATION PURPOSES ONLY,
AND
2020. All rights reserved.
At full volume, extended use of the mobile audio player may
damage the user's hearing.
10
*For models with this function
Note: Some models may need go to Settings menu, select
security and choose Memory cleanup.
To disable this function, please open the App White List and
turn off the auto cleanup switch.
To save energy, parts of AGM smartphones support application
white list function. By enabling function, applications will be
closed automatically when the screen is off.
*App White List
ADDITIONAL FUNCTIONS
2. Press the shortcut icon to activate/ de-activate the functions.
1. Pull down from status bar and open notification panel.
FUNCTIONS SHORTCUT MENU
Video and voice calls over the network.
Duo
Download third-party apps from the Play Store
Play Store
Search quickly for items on the Internet or your device.
Google
Store your content on the cloud, access it from anywhere, and
share it with others.
Drive
Watch videos stored on your device and download various
content to watch from the Play Store.
Play Movies & TV
FCC RF EXPOSURE INFORMATION:
WARNING!! Read this information before using your phone
In August 1986 the Federal Communications Commission (FCC) of the United States with its action in Report
and Outer FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF)
electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety
standard previously set by both U.S. and international standards bodies. The design of this phone complies with
the FCC guidelines and these international standards. Use only the supplied or an approved antenna.
Unauthorized antennas modifications, or attachments could impair call quality, damage the phone, or result in
violation of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into
contact with the skin, a minor burn may result. Please contact your local dealer for replacement antenna.
BODY-WORN OPERATION:
This device was tested for typical body-worn operations with the back/front of the phone kept 1.0cm from the
body. To comply with FCC RF exposure requirements, a minimum separation distance of 1.0cm must be
maintained between the user's body and the back/front of the phone, including the antenna. Third-party belt-
clips, holsters and similar accessories containing metallic components shall not be used. Body-worn accessories
that cannot maintain 1.0cm separation distance between the user’s body and the back/front of the phone, and
have not been tested for typical body-worn operations may not comply with FCC RF exposure limits and
should be avoided.
For more information about RF exposure, please visit the FCC website at www.fcc.gov
Your wireless handheld portable telephone is a low power radio transmitter and receiver. When it is ON, it
receives and also sends out radio frequency (RF) signals. In August, 1996, the Federal Communications
Commissions (FCC) adopted RF exposure guidelines with safety levels for hand-held wireless phones. Those
guidelines are consistent with the safety standards previously set by both U.S. and international standards bodies:
<ANSIC95.1> (1992) / <NCRP Report 86> (1986) / <ICNIRP> (1999)
Those standards were based on comprehensive and periodic evaluations of the relevant scientific literature. For
example, over 120 scientists, engineers, and physicians from universities, government health agencies, and
industry reviewed the available body of research to develop the ANSI Standard (C95.1). Nevertheless, we
recommend that you use a hands-free kit with your phone (such as an earpiece or headset) to avoid potential
exposure to RF energy. The design of your phone complies with the FCC guidelines (and those standards).
Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or
attachments could damage the phone and may violate FCC regulations.
NORMAL POSITION:
Hold the phone as you would any other telephone with the antenna pointed up and over your shoulder.
RF Exposure Information:
This product is compliance to FCC RF Exposure requirements and refers to FCC website https://apps.fcc.gov/
oetcf/eas/reports/GenericSearch.cfm search for FCC ID: 2AL95-T62PRO to gain further information include
SAR Values.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help
Do not use the device with the environment which below minimum -10℃ or over maximum 50℃,
the device may not work.
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device is acting as slave and operating in the 2.4 GHz (2412 ~2462 MHz) band.
The frequency stability of all transmission frequencies of U-NII-1，U-NII-2A
and U-NII -3 meets the 47 CFR FCC Part15.407(g) requirements, and the
manufacturer states that their transmissions remain within the U-NII-1，
U-NII-2A
and U-NII -3 bands.