Quick Start Guide

SPECIFCATIONS
Name: true wireless bluetooth earphones
Model: AGM BUDS
Driver: 13mm
Frequency response:20Hz~20KHz
Impedance:32ohm
Sensitivity:109±3db
Bluetooth version/range:V5.0/≥10m
Music/Talk time:about 5 hours/about 4 hours
Time with a charging case:16~20 hours
Quick Start Guide
AGM BOUDS
1.Please keep the distance between the
Bluetooth headset and the mobile phone
(or other connected device)within 1 meter,
the closer the better ;
2.Open the cover of the charging case,the
indicator light of the charging case is on,
L/R is automatically paired,and waiting to
connect to the Bluetooth device;
3.Turn on the users’mobile phone Bluetooth
function(or other Bluetooth device),search or
scan,at this time the mobile phone will search
for nearby Bluetooth devices,click on the
searched headset name:AGM BUDS,after
success connected,you can make a phone call
and listen to the music at this time;
4.If the headset is not connected for 3~5
minutes,the headset will automatically sleep
and shut down.
CONNECT THE DEVICE POWER ON AND PAIRING
Boot up
When the charging compartment is opened,the
headset automatically turn L/R is automatically
paired.
Shut down
Put the earhhone into the charging case and
close the lid,waiting for 2~3 secnonds to
automatically shut down.
Android system
Press the ear bar continuously for 2~3 seconds
to enter the voice assistant,(L/R touch area).
IOS system
1.Settings>Wireless and Network>Bluetooth>
Settings>(change the left and right noise to SIRI)
2.Press the ear bar continuously for 2~3 seconds
to call SIRI.
Calling answer
Press the ear bar once(L/R)on the touch area to
answer the phone.
Calling hang up
Press the ear bar once(L/R)on the touch area to
hang up the phone.
Incoming calling rejection
Press the ear bar twice(L/R)on the touch area to
area to reject the phone.
CALLING CONTROL
Charging case button
Single press:
Check the current battery
level of the charging case.
Play/Pause
Ear bar press 1 time(L/R) touch area.
Previous song
Press the ear bar bar 3 times in a row(L/R) touch
area.
Next song
Press the ear bar bar 2 times in a row(L/R) touch
area.
PLAYING MUSIC
CHARGE THE EARPONE
After the L/R earpone is put into the Charging
case,the earpone will be charged in the charging
compartment,and the light will flash for 3~4
seconds and the light will be off.
CHARGING CASR CHARGING
Charging case rated input:5V=1A
Charging time:About 2 hours
Charge interface:Type-c
Type-c
PRODUCT SAFETY INFORMATION
1.Do not use corrosive cleanser to clean this product.
2.Do not heat the product or nearby the fire,like cooking
stove.
3.Do not expose the product to sunlight directly for a long
time.
4.To avoid explosion,do not throw the product into fire.
5.Do not try to disassemble this product for any modification,
because it does not contain any repair components.
6.Do not use this product in the rain.
7.If you plan not to use this product for a long time,please
keep it in dry environment and make sure to charge it at least
once a month to avoid extre temperatures and dust.
8.The ambient temperature of product is 0-40℃.
Battery capacity
30mAh(earphones)
250mAh(charging case)
Indicator light
100%
75%
50%
25%
Basic information of manufacturer
Company:SHENZHEN AIJIEMO SCIENCE AND TECHNOLOGY
CO.,LTD
Copyright © AGM Group Limited
2021. All rights reserved.