User Manual of Handheld Thermal Binocular Camera About this Manual The Manual includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons.
User Manual of Handheld Thermal Binocular Camera MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS.
User Manual of Handheld Thermal Binocular Camera EU Conformity Statement This product and, if applicable, the supplied accessories are marked with “CE” and comply therefore with the applicable harmonized European standards listed under the Radio Equipment Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union.
User Manual of Handheld Thermal Binocular Camera ● Keep all wrappers after unpacking them for future use. In case of any failure occurred, you need to return the device to the factory with the original wrapper. Transportation without the original wrapper may result in damage on the device and the company shall not take any responsibilities. ● Do not drop the product or subject it to physical shock. Keep the device away from magnetic interference.
User Manual of Handheld Thermal Binocular Camera dealer for details. ● If the equipment is used in a manner not specified by the manufacturer, the protection provided by the device may be impaired. Using Environment ● DO NOT expose the device to extremely hot, cold, dusty, corrosive, saline-alkali, or damp environments. Make sure the running environment meets the requirement of the device.
User Manual of Handheld Thermal Binocular Camera Table of Contents 1 Overview .............................................................................................. 1 1.1 Device Description ..................................................................................... 1 1.2 Main Function ........................................................................................... 1 1.3 Appearance ...............................................................................................
User Manual of Handheld Thermal Binocular Camera 10.1 Common Material Emissivity Reference ..................................................
User Manual of Handheld Thermal Binocular Camera 1 Overview 1.1 Device Description The handheld thermal binocular camera (binoculars for short) is a pair of binoculars with both thermal observation function and target searching function. In harsh conditions, such as in total dark or under extreme low illumination, you can observe the long-distance targets with the binoculars. The binoculars are well-designed, and easily adopted for patrol and outdoor activities in the night. 1.
User Manual of Handheld Thermal Binocular Camera 1.3 Appearance 1.3.1 Button The main keys of the binoculars are shown below. For the descriptions of the menu buttons, see the table below. Button Adjust Key Mode Key Power Key Function Press the key to switch between Near, Middle, and Far in fusion mode. Hold the key to correct nonuniformity of display. Press the key to switch the pallets. Hold the key to adjust the digit zoom.
User Manual of Handheld Thermal Binocular Camera 1.3.2 Interface Front View Thermal Lens Visible Light Lens Top View Battery Compartment Tripod Screw Eyepieces Eyeshades Aviation Connector Approaching Sensor Rear View Interface Function Eyeshades Cover the eyes. Eyepieces View from there. Visible Light Lens Let the visible light in. Thermal Lens Let the infrared light in.
User Manual of Handheld Thermal Binocular Camera Battery Compartment The battery is here. Tripod Screw Install the binoculars on tripod. Aviation Connector Connect with the cables. See 1.3.3. Approaching Sensor Detect whether human eyes are approaching to save power. If it detected eyes, the OLED screen turns on, otherwise the OLED screen is off. 1.3.3 Cable BNC USB DB9 Cable Function BNC Connect it to the display screen. USB Connect it to your PC to backup videos/images. DB9 Reserved.
User Manual of Handheld Thermal Binocular Camera + - + - + - + - Thermal Binoculars (×1) USB Cable (×1) Battery Charger (×1) Manual (×1) Battery (×8) Straps (×2) Aviation Plug Cables (×1) 2.2 Non-dust Cloth (×1) Charge Device Purpose: For the first use, and when the device is running low, charge the batteries with your charger. Steps: 1. Take out the USB cable from the package. 2. Connect the USB cable with battery charger and appropriate adaptor. 3.
User Manual of Handheld Thermal Binocular Camera 4. 2.3 Model & battery bars Standby mode Unlighted Power-saving mode Press any button to activate it. Err Battery is damaged. Blinking Battery is being charged. Chg.Finish Battery is fully charged. Complete battery charging and disassemble the battery. Install Battery Purpose: Insert the batteries into the battery compartment. Steps: 1. Rotate the battery cover anticlockwise to disassemble it. 2.
User Manual of Handheld Thermal Binocular Camera 2.5 Menu Description Step: Hold the button to show the menu. In the menu, the direction keys, OK key, and the Exit key are shown below. See the figure below for the menu interface. The figure below is only for reference, the font size is readjusted for better viewing. GPS 2.6 Palettes Digital Zoom Hot Spot Storage Battery Cable Connection DO NOT drag the cables when you do the connecting, or when it is connected to the binoculars.
User Manual of Handheld Thermal Binocular Camera Connect the binoculars with the aviation cable, and you can connect the device to your PC via USB interface or the display via the BNC interface. Step: Connect the aviation cable with the aviation Interface. Make sure the anchor points match with each other and insert the cable. To disconnect the cable, lift the cable. 3 Image Settings 3.1 Focus DO NOT touch the lens directly with your finger, or place any sharp objects near them. Steps: 1.
User Manual of Handheld Thermal Binocular Camera 3.3 Adjust Contrast Steps: 1. Hold the key to show the menu of binoculars. 2. Press the key and key to move the cursor to Display submenu. 3. Press the key to confirm. 4. Press the key and key to move the cursor to Contrast submenu. 5. Press the key to confirm. 6. Press the key and key to set the contrast value. The higher, the more contrasting. 3.4 Switch Mode Purpose: The change of environment temperature will affect the display effect.
User Manual of Handheld Thermal Binocular Camera 2. Press the key to switch the view mode. Mode Description Thermal In thermal mode, the device displays the thermal view. Press the key to switch between white hot and black hot mode. Visible In visible mode, the device displays the view of visible light channel. Fusion B/W It displays the combined view of thermal channel and optical channel in black and white. City Applicable to city environment. Jungle Applicable to jungle environment.
User Manual of Handheld Thermal Binocular Camera 3.8 Display Time Steps: 1. Hold the 2. Press the submenu. 3. Press the 4. Press the submenu. 5. Press the key to show the menu of binocular. key and key to move the cursor to Settings key to confirm. key and key to move the cursor to Time key to switch on/off time display. 3.8.1 Synchronize Time Steps: 1. Hold the 2. Press the submenu. 3. Press the 4. Press the submenu. 5. Press the 6. Press the Time. 7. Press the key to show the menu of binocular.
User Manual of Handheld Thermal Binocular Camera 8. Press the key and key to move the cursor to date or time setting position. 9. Press the c key to confirm. 10. Press the key and key to adjust the value, and press the key to confirm. 4 Distance Measurement Purpose: Display the cursor on the live view, and the distance towards the target can be measured. Steps: 1. Hold the key to show the menu of binoculars. 2. Press the key and key to move the cursor to Cursor submenu.
User Manual of Handheld Thermal Binocular Camera 3. Press the key to confirm. 4. Manually move the binoculars, align the horizontal line with the target bottom and measure the distance to the target. 5. Hold the key to exit. To disable the cursor, go to Cursor submenu and press the key. 5 GPS Steps: 1. Hold the 2. Press the 3. Press the key to show the menu of binoculars. key and key to move the cursor to GPS submenu. key to switch ON or OFF. 6 Picture and Video 6.
User Manual of Handheld Thermal Binocular Camera 6.2 Record Video Steps: 1. In the live view mode, hold the key to record videos. When the recording time shows on the top, it starts to record. 2. When the desired video is recorded, hold the key to stop recording. 6.3 View File Steps: 1. Hold the key to show the menu of binoculars. 2. Press the key and key to move the cursor to File>Image or File>Video submenu. 3. Press the key to confirm. 4. Press the key and key to select file. 5.
User Manual of Handheld Thermal Binocular Camera Install the T-Vision software on your mobile phone first, and then connect your phone to the hot spot of the binocular. Purpose: You can configure the parameters, capture pictures, or record videos of the device via the software. Steps: 1. Hold the key to show the menu of binoculars. 2. Press the key and key to move the cursor to WLAN submenu. 3. Press the key to confirm. 4. Press the key and key to move the cursor to Hot Spot submenu. 5.
User Manual of Handheld Thermal Binocular Camera Android System 8. iOS System Open the APP and connect your phone with the device. You can view the interface of binoculars on your phone. 8 CVBS Output Before you start: Connect the binoculars to the display unit via CVBS interface of the aviation plug. Refer to Section 3.1. Purpose: View the binoculars image on the display unit for details. Steps: 1. Hold the key to show the menu of binoculars. 2.
User Manual of Handheld Thermal Binocular Camera 9.2 Upgrade Device Steps: 1. Connect the device to your PC with cable and open the detected disk. 2. Copy the upgrade file and paste it to the root directory of the device. 3. Disconnect the device from your PC. 4. Reboot the device and then it will upgrade automatically. The upgrading process will be displayed in the main interface. After the upgrading, the device automatically reboot.
User Manual of Handheld Thermal Binocular Camera Cotton 0.98 Cardboard 0.90 White Paper 0.90 Water 0.
User Manual of Handheld Thermal Binocular Camera 19 UD10553N-C 0504141091111