Hardware Instructions

Confidential Page 1 of 2 03/05/2019

Manual DSRFID readerRegulatoryIntegrationInstructions.doc

Medical Imaging

From: Jan Vercammen (6233) – R&D Mortsel Electronics

Date: March 21, 2019

Concerning: Regulatory and hardware instructions for integration of

DSRFID reader into host applications (concerns FCC ID: HPL-DSRFID)

This document describes the integration of a modular short-range RFID reader

into host applications. The company internal reference of the RFID reader (or

reader for short) is A800126.

Note that the reader is a drop-in replacement for older FCC certified RFID readers that were

type tested in several applications. The reader will never be sold to external parties. We

updated the original design with requirements for full modular approval. A 2

change is the

replacement of the original (but obsolete) microcontroller.

The reader is a drop-in replacement for similar RFID readers (modular approval

P5ROEM410V12 and type approved HPL5364A, HPL5366, HPL5366A, HPL5367, HPL5367A,

out-of-production HPL5365 and HPL5365A). The reader will be used in production and as a

spare part.

FCC Regulatory requirements

When integrating the reader (A800126) into an application the user should respect the following

regulatory requirements:

The reader has a permanent affixed label (with the text “FCC ID: HPL-DSRFID”) and, because

the module is not visible from the outside, an external label is required that has the text

“Contains Transmitter Module FCC ID: HPL-DSRFID” or “Contains FCC ID: HPL-DSRFID”.

This text must be integrated into the identification plate of the host application or on a separate

label.

Additional restrictions are that the reader cannot be sold to external parties, that is, it is

restricted to company-internal products. The integration instructions are confidential internal

manufacturing documents.

Note that the reader as standalone unit cannot function (per definition).

PAGE 1
ab Medical Imaging From: Jan Vercammen (6233) – R&D Mortsel Electronics Date: March 21, 2019 Concerning: Regulatory and hardware instructions for integration of DSRFID reader into host applications (concerns FCC ID: HPL-DSRFID) This document describes the integration of a modular short-range RFID reader into host applications. The company internal reference of the RFID reader (or reader for short) is A800126.
PAGE 2
ab Medical Imaging Additional regulatory information (for the application device manual): This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.