DRAFT - Agere #3: 05/14/2002 Quick Installation Guide Compaq Wireless LAN MultiPort W200 Document Part Number: 225839-005 May 2002 This guide provides information on installing and setting up the Wireless LAN MultiPort W200 as well as tips on solving common problems. Co mpaq CO N FID EN TIA L— For I nter nal U se O nl y 14 Ma y 200 2 Fil e: noti ce.
DRAFT - Agere #3: 05/14/2002 © 2002 Compaq Information Technologies Group, L.P. Compaq and the Compaq logo are trademarks of Compaq Information Technologies Group, L.P. in the U.S. and/or other countries. Microsoft, Windows, and Windows NT are trademarks of Microsoft Corporation in the U.S. and/or other countries. All other product names mentioned herein may be trademarks of their respective companies. Compaq shall not be liable for technical or editorial errors or omissions contained herein.
DRAFT - Agere #3: 05/14/2002 Contents 1 Getting Started Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using a Wireless Local Area Network . . . . . . . . . . . Features and Requirements . . . . . . . . . . . . . . . . . . . . . . . Selecting a Network Mode. . . . . . . . . . . . . . . . . . . . . . . . Peer-to-Peer Network . . . . . . . . . . . . . . . . . . . . . . . . Base Station Network . . . . . . . . . . . . . . . . . . . . . . . .
DRAFT - Agere #3: 05/14/2002 A Specifications Physical Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . A–1 Power Characteristics . . . . . . . . . . . . . . . . . . . . . . . . A–1 Networking Characteristics . . . . . . . . . . . . . . . . . . . . A–1 Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . A–2 Radio Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . A–2 B Troubleshooting Using the World Wide Web. . . . . . . . . . . . . . . . . . . .
DRAFT - Agere #3: 05/14/2002 1 Getting Started Introduction The Compaq Wireless LAN MultiPort W200 allows you to access wireless Local Area Networks, share a local printer and files with others in your network, access the Internet, and roam about the office—wire-free. This wireless Local Area Network solution is designed for both large and small businesses, and it is scalable so that you can add users and new network features as your networking needs grow.
DRAFT - Agere #3: 05/14/2002 Features and Requirements A wireless LAN includes the following features: ■ Support for the IEEE 802.11b Standard ■ 2.
DRAFT - Agere #3: 05/14/2002 Selecting a Network Mode A wireless LAN can be configured for two different modes of operation. While each method has its advantages, one may be better suited for your needs. Review the following configurations to determine which mode is best for you. ■ “Peer-to-Peer Network” ■ “Base Station Network” Peer-to-Peer Network Also called “ad hoc” network. This mode is the easiest to deploy and is ideal for small offices.
DRAFT - Agere #3: 05/14/2002 Characteristics Networked computers communicate with each other through a dedicated base station. All data transmitted between the computers on this wireless LAN passes through the base station. Advantages Extended range: The access point extends the range of the wireless LAN. Each computer can communicate with other computers equipped for wireless networking that are within the range of the access point.
DRAFT - Agere #3: 05/14/2002 2 Installing Software & Hardware Before you start Read and follow these guidelines where applicable: ■ New Computers—Before installing the Wireless LAN MultiPort W200, complete the system software setup process and ensure that your operating system is fully operational. Refer to the Getting Started guide included with your computer for instructions.
DRAFT - Agere #3: 05/14/2002 Preparing for Installation The Wireless LAN MultiPort W200 Software CD includes a wizard that will guide you through the installation and install the correct drivers and software for your computer. To ensure a successful installation, follow these guidelines. 1. Ask your network administrator for the settings that apply in your wireless network. Alternatively: Consult your peers for this information.
DRAFT - Agere #3: 05/14/2002 Installing Software 1. Turn on your computer. 2. Insert the Wireless LAN MultiPort W200 Software CD into the CD drive of your computer. The CD-ROM will start automatically and display the screen pictured below. If the CD-ROM does not start automatically, consult the section “Solving Common Problems” on page B-2. ✎ Some screens in the wizard look different for computers running Microsoft Windows XP Profesional or Home Edition.
DRAFT - Agere #3: 05/14/2002 4. Select the type of network to which you wish to connect your computer. Consult the section “Selecting a Network Mode” on page 1-3 for more information. 5. Enter the name of your wireless network. The Network Name is also referred to as Service Set Identification Designator (SSID). 6. Select the Security Settings 2-4 Quick Installation Guide Co mpaq CO N FID EN TIA L— For I nter nal U se O nl y 14 Ma y 200 2 Fi le: CMP Q_MM2.
DRAFT - Agere #3: 05/14/2002 To secure your wireless communications, use this screen to enable data encryption and enter the Encryption Key. Your selection on this window must match the values of the Base Station or your peer-to-peer group partners. Valid values are: ❏ 5 or 13-digit alphanumeric keys ❏ 10 or 26-digit hexadecimal keys, preceded by 0x. For more information about encryption keys, consult the electronic User’s Guide provided on the CD-ROM 7.
DRAFT - Agere #3: 05/14/2002 This will install the correct drivers for your computer and the Client Manager tool. 9. Now close the installation wizard and continue with “Installing the Wireless LAN MultiPort W200” on page 2-7. 2-6 Quick Installation Guide Co mpaq CO N FID EN TIA L— For I nter nal U se O nl y 14 Ma y 200 2 Fi le: CMP Q_MM2.
DRAFT - Agere #3: 05/14/2002 Installing the Wireless LAN MultiPort W200 Removing the Multiport Cover 1. Turn off your computer. 2. Disconnect all external devices connected to the computer, including AC power. If you have a notebook computer, remove all battery pack(s) from the computer. 3. Perform the following steps according to your computer model. Notebook computers Desktop computers a. Remove the Phillips screw securing the MultiPort cover to the computer. b.
DRAFT - Agere #3: 05/14/2002 Mounting the Wireless LAN MultiPort W200 Perform the following steps according to your computer model. Notebook computers Desktop computers 1. Place the module in the MultiPort bay, making sure to rest the tabs on the back of the module against the rear wall of the MultiPort bay. 2. Press down on the left rear corner of the Wireless LAN MultiPort W200. 3.
DRAFT - Agere #3: 05/14/2002 If you have a notebook computer, reinstall the battery pack(s). 6. Turn on the computer and continue with “Completing the Installation” on page 2-10. Completing the Installation When you turn on your computer, the Windows operating system will find a new USB device and start the “New Hardware Wizard”. Allow it to guide you through the driver installation process.
DRAFT - Agere #3: 05/14/2002 2-10 Quick Installation Guide Co mpaq CO N FID EN TIA L— For I nter nal U se O nl y 14 Ma y 200 2 Fi le: CMP Q_MM2.
DRAFT - Agere #3: 05/14/2002 3 Using the Wireless LAN MultiPort W200 Introduction This chapter provides general information on how to use your Compaq Wireless LAN MultiPort W200. It also shows you how to use the Client Manager tool to: ■ View Wireless Link Quality ■ View/Modify Wireless Settings ■ Disable/Enable the Wireless LAN MultiPort W200 radio. Radio Antennas The built-in radio and antennas of your Wireless LAN MultiPort W200 perform best in an open environment with as few obstacles as possible.
DRAFT - Agere #3: 05/14/2002 Using the Client Manager You can use the Client Manager to: ■ Verify the quality of your wireless connection to the network. ■ View/Modify the settings of your wireless connection. ■ Disable the radio of the Wireless LAN MultiPort W200 The Client Manager icon resides in the “System Tray” of your Windows task bar at the right-bottom side of your screen. ■ Click the icon once with your left mouse button to retrieve a more detailed status overview.
DRAFT - Agere #3: 05/14/2002 Icon Color Description Green Excellent radio connection Green Good radio connection Yellow Marginal radio connection: The radio signal is weak. Move closer to the Base Station Red Poor radio connection: The radio signal is very weak. Save your files and move closer to the Base Station. Red No radio connection because: • Looking for initial connection, or • You have moved out of range of the network. Blank No wireless interface detected or Peer-to-Peer network connection.
DRAFT - Agere #3: 05/14/2002 Alternatively you can change the Wireless LAN MultiPort W200 settings via the Control Panel: 1. Click the button from the Windows task bar. 2. In the Control Panel window, double-click the Wireless Network icon. 3. (Optional) Change the parameters you would like to modify, and click: ❏ ❏ the OK button to confirm your changes, or the Cancel button to ignore your modifications.
DRAFT - Agere #3: 05/14/2002 CAUTION: When you disable the radio you will lose your connection to the network. Before you disable the radio, make sure you have closed all files and network applications (such as E-mail). Enable Radio To enable the radio again: 1. Right-click the Client Manager icon on your task bar. 2. Select Enable Radio to activate your Wireless LAN MultiPort W200.
DRAFT - Agere #3: 05/14/2002 See the following illustrations and perform the following steps according to your computer model. Notebook computers Desktop computers 1. Remove the Phillips screw securing the Wireless LAN MultiPort W200 to the computer. 2. Press the Wireless LAN MultiPort W200 release button. 3. Slide the Wireless LAN MultiPort W200 from its position: ❏ ❏ For notebooks, slide toward the front of the computer. For desktops, slide toward the back of the computer. 4.
DRAFT - Agere #3: 05/14/2002 Finding Information For more information than contained in this Quick Installation Guide, please consult one of the following options: ■ The Compaq Wireless LAN on-line help system: a. Right-click the Client Manager icon on your task bar. b. Select Help Contents ■ http://www.compaq.com/products/wireless - for frequently asked questions (FAQ’s) and Software Updates. ■ The Compaq Wireless LAN MultiPort W200 User’s Guide provided on the CD-ROM.
DRAFT - Agere #3: 05/14/2002 3-8 Quick Installation Guide Co mpaq CO N FID EN TIA L— For I nter nal U se O nl y 14 Ma y 200 2 Fi le: CMP Q_MM3.
DRAFT - Agere #3: 05/14/2002 A Specifications Physical Specifications Dimensions (LxWxH) 165 x 65 x 14 mm Weight 100 gram Temperature & Humidity (non condensing) Operation 0° to 55° C maximum humidity 95% Transit -4° to 80° C humidity 15 to 95% Storage -4° to 80° C humidity 10 to 90% Power Characteristics Standby Mode Receive Mode Transmit Mode Power Supply 1 mA 400 mA (Nominal) 600 mA (Nominal) 5V and 3.
DRAFT - Agere #3: 05/14/2002 Regulatory Information Wireless communication is often subject to local radio regulations. Although wireless networking products have been designed for operation in the license-free 2.4 GHz band, local radio regulations may impose a number of limitations to the use of wireless communication equipment. Refer to the flyer “Information to the User” for more regulatory information that may apply in your country. Radio Characteristics R-F Frequency Band 2.
DRAFT - Agere #3: 05/14/2002 Modulation Technique Direct Sequence Spread Spectrum CCK CCK DQPSK Range/Transmit Rate 11 Mb/s 5.5 Mb/s 2 Mb/s Open Office 160 m 270 m 400 m (525 ft.) (885 ft.) (1300 ft.) Semi-Open Office 50 m 70 m 90 m (165 ft.) (230 ft.) (300 ft.) Closed Office 25 m 35 m 40 m (80 ft.) (115 ft.) (130 ft.) Receiver Sensitivity -82 dBm -87 dBm -91 dBm Delay Spread 65 ns 225 ns 400 ns (FER of <1%) DBPSK 1 Mb/s 550 m (1750 ft.) 115 m (375 ft.) 50 m (165 ft.
DRAFT - Agere #3: 05/14/2002 A-4 Quick Installation Guide Co mpaq CO N FID EN TIA L— For I nter nal U se O nl y 14 Ma y 200 2 F ile: C MPQ_MM_A.
DRAFT - Agere #3: 05/14/2002 B Troubleshooting Using the World Wide Web Support services are available on the Internet through the Compaq support forum. You can either browse the postings as a guest, or register as a user and submit your own questions. Compaq responds to questions within one business day. To access the Compaq support forum, go to the Compaq Web site at http://www.compaq.com.
DRAFT - Agere #3: 05/14/2002 Solving Common Problems The following table lists possible problems and the recommended solutions. Solving Problems Problem Solution Installation CD-ROM does not start • Open Windows Explorer • Navigate to the CD-ROM drive • Double-click the file “EZSetup.exe”. Cannot connect to one of the users in the network. • Make sure each network client is up and running. • Make sure your Network Name (SSID) settings are correct. • Make sure your WEP settings are correct.
DRAFT - Agere #3: 05/14/2002 Solving Problems (Continued) Problem Solution Windows 98 SE & Windows 2000 Professional: The Client Manager icon does not appear in the system tray. • Make sure the Wireless LAN MultiPort W200 is seated correctly. Refer to Chapter 2 for instructions. • Make sure the Wireless LAN MultiPort W200 status light is solid or flashing green.
