SX-15G, SX-17G & SX-19G LCD Monitor displays.agneovo.
TABLE OF CONTENTS Safety Information Federal Communications Commission (FCC) Notice (U.S. Only) ............................................................ 4 WEEE ....................................................................................................................................................... 5 Precautions Notice .......................................................................................................................................................
TABLE OF CONTENTS 3.6 Using FREEZE Function .................................................................................................................... 23 3.7 Using Auto Adjustment Function ........................................................................................................ 24 3.8 Using ROTATE Function .................................................................................................................... 24 3.9 Locking the OSD Menu ..................................
SAFETY INFORMATION Safety Information F ederal Communications Commission ( F CC) N otice ( U. S. Only) This eq uipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
SAFETY INFORMATION W E E E Information for users applicable in European Union countries. e sy ol on t e p o ct o its pac a in si nifies t at t is p o ct as to e disposed separately from ordinary household wastes at its end of life. Please in ly e a a e t at t is is yo esponsi ility to ispose elect onic e ip ent at recycling centers so as to help conserve natural resources. Each country in the European Union should have its collection centers for electrical and electronic eq uipment recycling.
PRECAUTIONS Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Symb ols used in this manual This icon indicates the exi stence of a potential haza rd that could result in personal injury or damage to the product. This icon indicates important operating and servicing information. N otice • Read this User Manual carefully before using the LCD display and keep it for future reference. epo • ct speci ications an ot e in o ation p o i e in t is se an al a e o e e ence only.
PRECAUTIONS Cautions W hen Using Use only the power cord supplied with the LCD display. The power outlet should be installed near the LCD W arning: display and be easily accessible. Unplug the power cord If an ext ension cord is used with the LCD display, from the power outlet and ensure that the total current consumption plugged into the power outlet does not exce ed the ampere rating. e e to alifie se ice personnel under the following conditions: Do not allow anything to rest on the power cord.
PRECAUTIONS N otice for the LCD Display In order to maintain the stable luminous performance, it is recommended to use low brightness setting. Due to the lifespan of the lamp, it is normal that the brightness q uality of the LCD display may decrease with time. When static images are displayed for long periods of time, the image may cause an imprint on the LCD display. This is called image retention or burn-in.
CHAPTER 1: PRODUCT DESCRIPTION Chapter 1: Product Description 1. 1 Package Contents When unpacking, check if the following items are included in the package. If any of them is missing or damaged, contact your dealer. LCD Display Q uick Start G uide Pow er adapter N ote: Must use only the supplied power adapter: ADAPTER TECH Model no.: ATS040T-P120 Rating: 12V/3.3A SX-15G, SX-17G & SX-19G Quick Start Guide SX-15G, SX-17G & SX-19G LCD Monitor SX-15G/SX-17G/SX-19G_Quick Guide_V010 displays.agneovo.
PRODUCT DESCRIPTION 1. 2 W all Mounting Installation Preparation N ote: 1. 2. 1 To protect the glass panel, place a W all Mounting towel or soft cloth before laying the 1 R emov e the b ase stand. LCD display down. See procedures below. 2 W all mount the LCD display. Screw the mounting bracket to the VESA holes at the rear of the LCD display. W arning: Ceiling mount or mount 100mm on any other horizo ntal surface overhead are not advisable.
PRODUCT DESCRIPTION 1. 3 LCD Display Ov erv iew 1. 3. 1 F ront V iew and K eypad B uttons 1 2 3 4 5 6 7 8 1 SOUR CE Press to select the input signal source. 2 ME N U Press to display/hide the OSD menu. 3 4 5 6 UP Hot Key: PIP/PBP Select • Press repeatedly to select PIP/PBP option . • When OSD menu is ON, press to select an option or adjust the settings. R IG H T Hot Key: Screen Freeze • Press to activate the screen freeze function. To deactivate, press any key exce pt for the Power key.
PRODUCT DESCRIPTION 1. 3. 2 R ear V iew S-VIDEO 7 COMPOSITE-1 IN 8 OUT 9 COMPOSITE-2 IN 8 OUT 9 AUDIO L 10 IN R AUDIO L 11 OUT R DC IN DVI HDMI DisplayPort VGA AUDIO IN USB (SERVICE) 12 RS232 13 1 2 3 4 5 6 1 DC IN Connect with the supplied power adaptor. 8 COMPOSIT E - 1/ COMPOSIT E - 2 IN Connect Composite (CVBS) signals input. 2 DV I Connect DVI signals input. 9 COMPOSIT E - 1/ COMPOSIT E - 2 OUT Connect Composite (CVBS) signals output.
CHAPTER 2: MAKING CONNECTIONS Chapter 2: Making Connections 2. 1 Connecting the Pow er 1 Connect the power cord to the power adapter. 2 Connect the power adapter to the DC power input at the rear of the LCD display. 3 Connect the power cord plug to a power outlet or a power supply. DC IN Caution: Make sure that the LCD display is not connected to the power outlet before making any connections. Connecting cables while the power is ON may cause electric shock or personal injury.
MAKING CONNECTIONS 2. 2 Connecting Input Source Signals 2. 2. 1 Connecting a Computer Using V G A Cab les Connect one end of a VGA cable to the VGA connector of the LCD display and the other end to the VGA connector of the computer. VGA Using DV I Cab les Connect one end of a DVI (DVI-D) cable to the DVI connector of the LCD display and the other end to the DVI connector of the computer.
MAKING CONNECTIONS Using H DMI Cab les Connect one end of an HDMI cable to the HDMI connector of the LCD display and the other end to the HDMI connector of the computer. HDMI Using DisplayPort Cab les Connect one end of a DisplayPort cable to the DisplayPort connector of the LCD display and the other end to the DisplayPort connector of the computer.
MAKING CONNECTIONS Using R S232 Cab les Connect one end of an RS232 cable to the RS232 connector of the LCD display and the other end to the RS232 connector of the computer. RS232 Using Audio Cab les Connect one end of an audio cable to the AUDIO IN connector at the rear of the LCD display and the other end to the audio out connector of the computer.
MAKING CONNECTIONS 2. 2. 2 Connecting a V ideo Dev ice Using Composite ( CV B S) Cab les Connect one end of a Composite (CVBS) cable to the COMPOSITE 1 / COMPOSITE 2 IN connector of the LCD display and the other end to the Composite (CVBS) connectors of your device. For audio input, connect an RCA cable to the AUDIO IN connectors of the LCD display and the audio out connector of your device.
MAKING CONNECTIONS Using S- V ideo Cab les Connect one end of an S-Video cable to the S-VIDEO connector of the LCD display and the other end to the S-VIDEO connector of your device. For audio input, connect an RCA cable to the AUDIO IN connectors of the LCD display and the audio out connector of your device. S-VIDEO AUDIO L IN R Using H DMI Cab les Connect one end of an HDMI cable to the HDMI connector of the LCD display and the other end to the HDMI connector of your device.
MAKING CONNECTIONS Using DisplayPort Cab les Connect one end of a DisplayPort cable to the DisplayPort connector of the LCD display and the other end to the DisplayPort connector of your device.
CHAPTER 3: USING THE LCD DISPLAY Chapter 3: Using the LCD Display 3. 1 T urning on the Pow er 1 Connect the power cord to the power adapter. Then connect the power adapter to the DC power input at the rear of the LCD display. 2 Press the POW E R button to turn the LCD display on. The LED indicator turns GREEN. N ote: The LCD display still consumes power as long as the power cord is connected to the power outlet. Disconnect the power cord to completely cut off power.
USING THE LCD DISPLAY 3. 3 Adjusting the V olume 1 Press the t button to call out the volume bar. 2 Press the u button to increase volume or the t button to decrease volume. Hot Key: Audio V olume Adjustment 3. 3. 1 Muting the Audio Press the u and t buttons simultaneously to mute or unmute the audio. 3. 4 Choosing Y our Preferred Picture Settings Hot Key: PICT UR E MODE Select Press the q button repeatedly to toggle between the picture modes.
USING THE LCD DISPLAY 3. 5 Using Picture- in- Picture ( PIP) The Picture-in-Picture (PIP) and Picture-by-Picture (PIP) feature allows viewing of more than one input source signal on the LCD display. 3. 5. 1 PIP/ PB P Options Hot Key: PIP/ PB P Select Press the p button repeatedly to enable and scroll among the PIP/PBP options. Options are as follows: • PIP On: The sub source signal is displayed within the • main source signal.
USING THE LCD DISPLAY 3. 5. 2 PIP/ PB P Sw ap The main and the sub source signals set in PIP/PBP Setting can be easily swapped using the keypad. N ote: Sub source Main source PIP/PBP Swap can only be ex ecuted if PIP is enabled, see page 38. Press the q button to swap the main source and the sub source signals. See illustration below. Sub source Main source 3.
USING THE LCD DISPLAY 3. 7 Using Auto Adjustment F unction N ote: Auto Adjustment function is available only during VGA input Auto Adjustment function automatically tunes the signals. LCD display to its optimal setting, including horizo ntal position, vertical position, clock, and phase. It is recommended to use the auto adjustment function when Press the button to perform auto adjustment. The message auto adjusting is displayed on the screen.
USING THE LCD DISPLAY 3. 9 Locking the OSD Menu Lock the OSD menu to protect the LCD display from unauthorised users or from accidentally pressing the keypad. To lock the OSD, press and hold the keypad buttons listed below for at least 5 seconds or until the OSD LOCK OUT message appears. When the OSD is locked, all keypad buttons are inactivated.
CHAPTER 4: ON SCREEN DISPLAY MENU Chapter 4: On Screen Display Menu 4. 1 Using the OSD Menu Operation 1 Display the main menu screen. 1 9 2 0 x 1 0 8 0 Press the button. 6 0 H z B R I G H T N E S S 5 0 BRIGHTNESS C O N T R A S T 5 0 C O L O U R T E M P.
ON SCREEN DISPLAY MENU Operation Press the p or q button. Select the submenu item. 3 0 x 1 0 8 0 6 0 H z B R I G H T N E S S 5 0 RIGHTNESS C O N T R A S T 5 0 O L O U R T E M P. B A C K L I G H T 6 0 AGE SETTING B L A C K L E V E L 5 0 SPECT RATIO P SETTING The highlighted item with an orange arrow indicates the active NTI-BURN-IN submenu. SD SETTING 4 Adjust the settings. Press the t or u button. 5 Exi t the submenu.
ON SCREEN DISPLAY MENU 4. 2 OSD Menu T ree 1 9 2 0 x 1 0 8 0 6 0 H z B R I G H T N E S S 5 0 BRIGHTNESS 1 C O N T R A S T 2 C O L O U R T E M P. 3 IMAGE SETTING 5 0 B A C K L I G H T 6 0 B L A C K 4 ASPECT RATIO 5 PIP SETTING 6 ANTI-BURN-IN Main Menu 1. SS 7 AUDIO SETTING 8 SYSTEM 1 9 SYSTEM 2 10 ECOSMART SENSOR 11 INPUT SELECT 12 LANGUAGE 13 INFORMATION 14 Sub menu E N SS • • 5 0 OSD SETTING E X I T L E V E L T E R R Semarks E L E C T See page 31. CONTRAST • • 2.
ON SCREEN DISPLAY MENU Main Menu S Sub menu 3. • S • S SS R emarks See page 34. • • • S • D D • • . S • . S S • • 4. S CLOCK • FULL • REAL See page 37. • 5. S See page 38. • S • SUB SOURCE • S • S • SWAP • ENABLE 6. • S . S. See page 40. S • 7. 8. MODE • TRANSPARENCY SD S • D SD . S • SD . S • SD S • • See page 41. See page 42. VOLUME D • • SOURCE • S • SOURCE DETECT • DD • BLUE SCREEN • S • Alink 9. SYSTEM 1 • • LED • RESET 29 See page 43.
ON SCREEN DISPLAY MENU Main Menu Sub menu S 10. SYSTEM 2 • S • MODE • DCR • D • D 11. ECOSMART SENSOR ENABLE • MODE • LEVEL S • See page 47. See page 48. • D • • D • DS • S • S • 13. See page 45. D • 12. R emarks S 1 D Select t e SD lan D a e S S NL / 简中 / 繁中 1 . Displays settin s in o esol tion o i ontal e i in ency Version.
CHAPTER 5: ADJUSTING THE LCD DISPLAY Chapter 5: Adjusting the LCD Display 5. 1 B rightness 1 9 2 0 x 1 0 8 0 6 0 H z 1. Press the B R I G H T N E S S 5 0 BRIGHTNESS button to call out the OSD window. C O N T R A S T 5 0 C O L O U R T E M P. B A C K L I G H T 6 0 IMAGE SETTING B L A C K 2. Select B R IG H T N E SS menu, then press the u button. L E V E L 5 0 ASPECT RATIO PIP SETTING 3. Press the p or q button to select an option.
ADJUSTING THE LCD DISPLAY Original Setting H igh Setting BRIGHTNESS CONTRAST BLACK LEVEL 32 Low Setting
ADJUSTING THE LCD DISPLAY 5. 2 Colour T emp. 1 9 2 0 x 1 0 8 0 6 0 H z 1. Press the N E U T R A L window. WA R M BRIGHTNESS button to call out the OSD C O O L U S E R C O L O U R T E M P. IMAGE SETTING R 1 2 8 G 1 2 8 B 1 2 8 A U T O ASPECT RATIO 2. Select COLOUR T E MP. menu, then press the u button. 3. Press the p or q button to select an C O L O U R PIP SETTING option.
ADJUSTING THE LCD DISPLAY 5. 3 Image Setting 1 9 2 0 x 1 0 8 0 1. Press the 6 0 H z S H A R P N E S S BRIGHTNESS button to call out the OSD window. 0 S CA O TN UT R RA A TS I TO N 5 0 C O L O U R T E M P. 2. Select IMAG E SE T T IN G T I N T press the u button. 5 0 IMAGE SETTING ASPECT RATIO G A M M A 2 . 0 2 . 2 PIP SETTING C O L O U R R A N G E A U T O 2 . 4 menu, then 3. Press the p or q button to select an S option.
ADJUSTING THE LCD DISPLAY Item F unction Operation R ange Adjusts black and white levels for video. Press the t or u button to N ote: This menu option is only available if the input source is HDMI. select the setting.
ADJUSTING THE LCD DISPLAY Item F unction Operation R ange H. POSITION Moves the screen image to the left (Horiz ontal Position) or right. V. POSITION (Vertical Position) Moves the screen image up or down. Adjusts the phase timing to synchronise with the video signal. PHASE N ote: This menu option is only available if the input source is VGA. Adjusts the freq uency timing to synchronise with the video signal. CLOCK N ote: This menu option is only available if the input source is VGA.
ADJUSTING THE LCD DISPLAY 5. 4 Aspect R atio 1 9 2 0 x 1 0 8 0 6 0 H z 1. Press the F U L L window. R E A L BRIGHTNESS button to call out the OSD N A T I V E C O L O U R T E M P. H . Z O O M IMAGE SETTING V. Z O O M 5 0 2. Select ASPE CT R AT IO menu, then press the u button. 5 0 ASPECT RATIO O V E R S C A N 0 PIP SETTING 3. Press the p or q button to select an option.
ADJUSTING THE LCD DISPLAY 5. 5 PIP Setting 1 9 2 0 x 1 0 8 0 6 0 H z 1. Press the P I P O F F BRIGHTNESS window. P I P P B P C O L O U R T E M P. 2. Select PIP SE T T IN G M A I N S O U R C E V G A D V I H D M I IMAGE SETTING C O M P O S I T E 1 C O M P O S I T E 2 3. Press the p or q button to select an S - V I D E O PIP SETTING option. S U B S O U R C E V G A D V I H D M I ANTI-BURN-IN menu, then press the u button.
ADJUSTING THE LCD DISPLAY N ote: Any input signal may be set as the main or the sub source signal. However, some input signals are not supported to be paired together as the main and the sub source signals.
ADJUSTING THE LCD DISPLAY 5. 6 Anti- B urn- in 1 9 2 0 x 1 0 8 0 6 0 H z 1. Press the BRIGHTNESS E N A B L E O N C O L O U R T E M P. I N T E R VA L ( H O U R S ) 4 5 6 8 IMAGE SETTING M O D E A B O F F button to call out the OSD window. 2. Select AN T I- B UR N - IN menu, then press the u button. C 3. Press the p or q button to select an ASPECT RATIO PIP SETTING option.
ADJUSTING THE LCD DISPLAY 5. 7 OSD Setting 1 9 2 0 x 1 0 8 0 6 0 H z 1. Press the T R A N S PA R E N C Y 0 BRIGHTNESS O S D H . P O S I T I O N O S D V. P O S I T I O N 5 0 C O L O U R T E M P. 5 0 IMAGE SETTING O S D button to call out the OSD window. 2. Select OSD SE T T IN G menu, then press the u button. T I M E R ASPECT RATIO 1 5 PIP SETTING 3. Press the p or q button to select an option.
ADJUSTING THE LCD DISPLAY 5. 8 Audio Setting 1 9 2 0 x 1 0 8 0 6 0 H z 1. Press the V O L U M E 5 0 BRIGHTNESS button to call out the OSD window. A U D I O C O L O U R T E M P. O N 2. Select AUDIO SE T T IN G O F F P C menu, then press the u button. S O U R C E IMAGE SETTING V I D E O 3. Press the p or q button to select an ASPECT RATIO PIP SETTING option.
ADJUSTING THE LCD DISPLAY 5. 9 System 1 1 9 2 0 x 1 0 8 0 6 0 H z P O W E R BRIGHTNESS 1. Press the S AV I N G O N S O U R C E D E T E C T A U T O C O L O U R T E M P. 2. Select SY ST E M 1 menu, then press the M A N U A L IMAGE SETTING u button. D D C / C I O N ASPECT RATIO B L U E O F F 3. Press the p or q button to select an S C R E E N O N O F F PIP SETTING S I G N A L O N ANTI-BURN-IN button to call out the OSD window. O F F option.
ADJUSTING THE LCD DISPLAY Item F unction Operation R ange Press the t or u button to ON Activates the DDC/CI protocol to allow users DDC/CI to confi et e onito y a so t a e sin two wires on the VGA, HDMI, DisplayPort, or DVI cables. BLUE SCREEN SIGNAL INFO Enables or disables the blue screen feature. If the setting is set to ON , it displays a blue screen when no signal is available. Enables or disables the signal information to be displayed on the screen.
ADJUSTING THE LCD DISPLAY 5. 10 System 2 1 9 2 0 x 1 0 8 0 6 0 H z S U P E R 1. Press the R E S O L U T I O N BRIGHTNESS button to call out the OSD window. O F F L O W M I D C O L O U R T E M P. 2. Select SY ST E M 2 menu, then press the H I G H IMAGE SETTING u button. O V E R D R I V E O F F ASPECT RATIO 3. Press the p or q button to select an L O W M I D PIP SETTING option.
ADJUSTING THE LCD DISPLAY Item F unction Operation R ange Press the t or u button to ON select the setting. OFF Activates DCR. This feature provides automatic adjustment of picture brightness and contrast at high speed and dynamic DCR contrast range, such as when watching (Dynamic movies. DCR is suitable for indoor viewing. Contrast Ratio) N ote: When the DCR function is activated, the BACKLIGHT and ECOSMART SENSOR function will be disabled. Enables or disables the night mode feature.
ADJUSTING THE LCD DISPLAY 5. 11 E coSmart Sensor With the built-in EcoSmart sensor, users can enable the Eco Smart feature to automatically adjust the LCD screen brightness according to the ambient light. This feature comforts the eyes and helps optimise energy e ficiency. 1 9 2 0 x 1 0 8 0 6 0 H z 1. Press the E N A B L E O N BRIGHTNESS button to call out the OSD window. O F F M O D E A U T O C O L O U R T E M P. 2.
ADJUSTING THE LCD DISPLAY 5. 12 Input Select 1 9 2 0 x 1 0 8 0 6 0 H z 1. Press the V G A window. D V I BRIGHTNESS button to call out the OSD H D M I D I S P L AY P O R T C O L O U R T E M P. IMAGE SETTING C O M P O S I T E 1 C O M P O S I T E 2 2. Select IN PUT SE LE CT menu, then press the u button. S - V I D E O 3. Press the p or q button to select an ASPECT RATIO PIP SETTING option.
CHAPTER 6: APPENDIX Chapter 6: Appendix 6. 1 W arning Messages W arning Messages Cause The resolution or the refresh rate of INPUT SIGNAL OUT OF RANGE • Solution Change the resolution or the the graphics card of the computer refresh rate of the graphics is set too high. card. The LCD display cannot detect the Check if the input source is input source signal. • turned ON. • Check if the signal cable is NO SIGNAL properly connected.
APPENDIX 6. 2 Supported R esolutions 6. 2.
APPENDIX 6. 2.
APPENDIX R esolution V ideo Mode R efresh R ate H orizo ntal V ertical HDTV 1920 1080 60 HDTV 1920 1080 24 HDTV 1920 1080 25 HDTV 1920 1080 30 6. 3 T roub leshooting Prob lem Possib le Cause and Solution No picture. • Check if the LCD display is turned ON. • Check if the power cord is properly connected to the LCD display. • Check if the power cord is plugged into the power outlet. • • Check if the computer is turned ON.
APPENDIX Prob lem Cannot adjust the backlight Possib le Cause and Solution • setting. The Eco Smart feature is enabled. Set the E COSMAR T SE N SOR > E N AB LE setting to OF F to disable the Eco Smart feature (see page 47). The displayed picture looks • Adjust the aspect ratio (see page 37). distorted. Dew formed on or inside This normally happens when the LCD display is moved a cold room to the LCD display. • a hot room temperature.
APPENDIX 6. 4 T ransporting the LCD Display To transport the LCD display for repair or shipment, place the display in its original packaging carton. 1 Place the tw o foam cushions on each side of the LCD display for protection. 2 Place the LCD display dow n in the b ox. 3 Place the accessories b ox on the designated area ( if necessary) . 4 Close and tape the b ox.
CHAPTER 7: SPECIFICATIONS Chapter 7: Specifications 7 isp a Specifications SX - 15G Panel Freq uency (H/V) Input SX - 17 G SX - 19 G Panel Type LED-Backlit TFT LCD (VA Technology) LED-Backlit TFT LCD (TN Technology) LED-Backlit TFT LCD (TN Technology) Panel Size 15.0” 17.0” 19.0" Max. Resolution XGA 1024 x 768 SXGA 1280 x 1024 SXGA 1280 x 1024 Pixe l Pitch 0.297 mm 0.264 mm 0.
SPECIFICATIONS 7 i ensions S i ensions 25 50.1 7 isp a 380(outline dimension) 53.5 372 30 306(opening dimension) 33 0°~20° 33 136 136 100 75 27.2 116.6 30 100 359 217.8 145 186 62 90.4 162 47 307 229.9(opening dimension) 315(outline dimension) (M4xL10) x8 186 155 282.4 44.8 44.8 179.4 i ensions 31.5 61.5 7 64.5 340(opening dimension) 149 100 149 (M4xL10) x8 134.5 75 199 75.25 116 183 398.2 75 100 235 167.5 31.3 0°~22° 46.8 350.5 37 29 40.
SPECIFICATIONS i ensions 61.5 S 31.5 7 64.5 0~22° 167 100 167 75 378.5 (opening dimension) 145.5 27.8 420.2 8x M4 75 100 179.6 27.8 xL 10 41.2 127 193 372.5 37 434 303.5 (opening dimension) 383.9(outline dimension) 27.8 445.4 (outline dimension) 240 175 78 278 78 eo o Company Address: 5F-1, No. 3-1, Park Street, Nangang District, Taipei, 11503, Taiwan. Copyright © 2020 AG Neovo. All rights reserved.