TREKZ TITANIUM User Guide
Set up your Trekz Titanium 1. Charge 2. Pair 3. Connect Charge the headphones with the included micro-USB charging cable. The LED indicator will turn blue when charging is complete. Press and hold the power button for 5 seconds to enter pairing mode. The LED indicator will flash blue and red repeatedly while in discovery. Enable the Bluetooth® settings on your device and select “Trekz Titanium by AfterShokz”. The LED indicator will turn blue once connected.
Multifunction Button (A) Function Specifications Action Prompt/”Audrey Says™” Part number AS600 Wireless range 33 ft (10m) Bone conduction transducer Battery Rechargeable lithium ion Play/pause music Click once One beep Speaker type Skip to next song Double-click while music is playing One beep Frequency response 20Hz~20KHz Continuous play 6 hours Answer/end call Click once One beep Sensitivity 100 ± 3dB Standby time 10 days Answer call waiting and put the current caller on hold
Optional Accessories Storage and maintenance • Store the headphones in a cool and dry place. The working temperature should be 0~45°C(32~113°F). Working in cold/hot environments or highly humid areas may reduce the life of the battery. FitBand (D) Silicon rubber bands provide adjustability to accommodate smaller head sizes. • After storing the headphones for an extended period, charge the unit before using it again. • The headphones are sweat resistant, but are NOT waterproof.
#beopen Visit us at aftershokz.
