User's Guide

Microphone 1
Volume
Power
Magnetic
Charging Port
LED Indicator
Multifunction Button
Microphone 2
B C
D
A
ENGLISH
1. Charge
2. Pair
3. Connect
Charge the headphones with the included magnetic charging cable. The
LED indicator will turn from red to blue when charging is complete.
Start with your headphones off. Enter pairing mode by pressing and
holding volume+ until Audrey says “pairing” and the LED indicator flashes
red and blue.
Open your device’s Bluetooth
®
menu and select “Aeropex by AfterShokz.”
Audrey says “connected” and the LED indicator will flash blue one time.
Let us take care of you! We’ve got your back against defects.
Register your Aeropex at
register.aftershokz.com
Multifunction Button (A)
Play / pause music Click once
One beep
Skip to next song
Double-click
while music is playing
One beep
Skip to previous song
Three-click
while music is playing
One beep
Answer call Click once
Two beeps
End call
Answer call waiting and
hang up on current caller
Click once One beep
Press and hold for 2 seconds One beep
Reject a call Press and hold for 2 seconds Two beeps
Device beep
Prompt device assistant Press and hold for 2 seconds
Redial last number Double-click (when idle) "Redial last number"
Function Action Prompt / “Audrey Says™”
Function Action Prompt / “Audrey Says™”
How to Set Up Aeropex
AEROPEX
“Welcome to AfterShokz”
Power on
Press and hold volume+ for 2
seconds
Power off
“Power off”
Press and hold volume+ for 3
seconds
Press and hold both buttons for
2 seconds while on a call
Press and hold both buttons for
3 seconds while music is playing
Click the volume+ or volume-
button while music is paused
Click the volume+ or volume- button
to adjust volume while music is playing
Mute
“Mute on” or “Mute off”
Change EQ
setting
“EQ changed”
“Battery high/Battery medium/
Battery low/Charge me”
Adjust volume
One beep
Check battery
status
AfterShokz LLC
6057 Corporate Dr., East Syracuse, NY 13057
Manufacturer
LED Indicator
Solid red Charging
Solid blue Charging complete
Flashes red and blue Pairing mode
Flashes blue Incoming call
Flashes red every 2 minutes Low battery
Optional Accessories
Earplugs (D)
Use with headphones in environments where it is safe to block out ambient noise,
such as on a train or airplane.
1. Roll earplugs firmly between fingers and place in ears.
2. To adjust EQ settings to reduce or enhance bass while wearing earplugs, press
and hold volume+ and volume- buttons simultaneously.
3. Switch EQ to original setting when you take out the earplugs.
How to Reset Your Headphones
1. Start with your headphones off.
2. Enter pairing mode by pressing and holding volume+ until Audrey says “pairing”
and the LED indicator flashes red and blue.
3. Press and hold the multifunction button, volume+ button and volume- button
(all three buttons) simultaneously for 3-5 seconds, until you hear two beeps or
feel vibrations.
4. Turn your headphones off.
Aeropex
is now reset and can be re-paired to your device.
Volume+ / Power Button (B); Volume- Button (C)
Multipoint pairing allows Aeropex to be connected to two devices at once,
allowing users to seamlessly transition between the two.
1.
Start with your headphones off.
2.
Press and hold volume+ until Audrey says “pairing” and the LED indicator flashes
red and blue.
3.
Press and hold the multifunction button and volume+ button for 3 seconds.
Audrey says "multipoint enabled."
4.
Open your first device's Bluetooth
®
menu and select "Aeropex by AfterShokz."
Audrey says "connected"
5.
Turn your headphones off.
6.
Re-enter pairing mode by pressing and holding volume+ until Audrey says “pairing”
and the LED indicator flashes red and blue.
7.
Open your second device's Bluetooth
®
menu and select "Aeropex by AfterShokz."
Audrey says "connected."
8.
Turn your headphones off.
9.
Turn your headphones on. Your headphones are now connected to both devices.
10.
To turn multipoint pairing off: Press and hold the multifunction button and volume-
button for 3 seconds. Audrey says "multipoint disabled."
Multipoint Pairing
Charging Port Alert
Part number
AS800 20Hz~20KHz
Specifications
Speaker type
Frequency response
Bone conduction transducer
Bluetooth
®
version Microphone
Sensitivity
105 ± 3dB
-38dB ± 3dBBluetooth
®
v5.0
Warranty
Weight
Battery
2 years
26 g
Up to 10 days
2402MHz~2480MHz 4dBm
A2DP, AVRCP, HSP, HFP
Frequency band Maximum RF output power
Continuous play Standby time
Charge time
Compatible profiles
Battery capacity
Maximum charge voltage
Speaker impedance
5.0V±5%
11.4 omh
Water resistance
IP67
145 mAh
Li-Polymer battery
Up to 6 hours
2 hours
Wireless range
10 m
User Guide
This device has the function of liquid residue detection. During charging, if there is
sweat and other liquid residues in the charging interface,the device will flash
"Red-Blue" lights，in the same time the headphone core vibrates and emits a "Di-Di"
warning sound. Please dry the liquid on the charging port of the device，then the
device can be charged back to normal.