User Manual

TREKZ AIR
User Guide I Manual de uso I Mode d’emploi
Bedienungsanleitung I Manuale Utente I Guia do utilizador

Microphone 1
Micrófono 1
Microphone 1
Mikrofon 1
Encendido
Bouton d'alimentation
Ein/Aus
Volume
Power
Botón para subir volumen
Volume
Lautstärke
Charging Port
Micro-USB
Charging Port
Mikro-USB
LED Indicator
Indicador LED
Indicateur LED
LED-Anzeige
Multifunction Button
Botón multifunción
Bouton multifonction
Multifunktionstaste
Microphone 2
Micrófono 2
Microphone 2
Mikrofon 2
B
C
D
PAK-MU0000272R
Charg
M
ic
r
o-
Ch
ar
g
i
Mi
k
ro
-
LED I
n
I
ndica
d
I
n
dica
t
LED-A
M
u
l
t
if
u
n
ct
i
o
n B
utto
n
Botón multi
f
unción
Bouton multifonctio
n
Multi
f
unktions
taste
Microp
Mi
c
r
óf
Micro
p
Mikr
of
A
A
Part number
AS650 20Hz~20KHz
Specifications
Speaker type
Frequency response
Bone conduction transducer
ENGLISH
1. Charge
2. Pair
3. Connect
Charge the headphones with the included micro-USB cable. The LED light
will turn from red to blue when charging is complete.
Start with your headphones off. Enter pairing mode by pressing and
holding volume+ until Audrey says “pairing” and the LED light flashes red
and blue.
Open your device’s Bluetooth® menu and select “Trekz Air By AfterShokz.”
Audrey says “Connected” and the LED light will flash blue one time.
Let us take care of you! We’ve got your back against defects.
Register your Trekz Air at
register.aftershokz.com
Multifunction Button (A)
Play/pause music Click once
One beep
Skip to next song
Double-click
while music is playing
One beep
Answer/end call Click once
Two / One beep
Answer call waiting and put
the current caller on hold
Answer call waiting and
hang up on current caller
Click once
to switch between callers
One beep
Press and hold for 2 seconds One beep
Reject a call Press and hold for 2 seconds Two beeps
Device beep
Prompt device assistant Press and hold for 2 seconds
Redial last number Double-click “Last number redial”
Function Action Prompt/“Audrey Says™”Function Action Prompt/“Audrey Says™”
How To Set Up Trekz Air
“Welcome to Trekz Air.”
Power on
Press and hold volume+ for 3
seconds.
Power off “Power off”
Press and hold volume+ for 3
seconds.
Press and hold both buttons for
2 seconds while on a call
Press and hold both buttons for
3 seconds while music is playing
Click the volume up or down button
while music is paused
Click the volume up or down button
to adjust volume
Mute
“Mute on” or “Mute off”
Change EQ
setting
“Equalization changed”
“Battery high, medium,
low (or) charge me”
Adjust volume
One beep
Check battery
status
AfterShokz LLC,1 Adler Drive,East Syracuse, NY 13057.
Manufacturer
LED Indicator
Solid red Charging
Solid blue Charging complete
Flashes red and blue Pairing mode
Flashes blue Incoming call
Flashes red every 2 minutes Low battery
Optional Accessories
Earplugs (D)
Use with headphones in environments where it is safe to block out ambient noise,
such as on a train or airplane.
1. Roll earplugs firmly between fingers and place in ears.
2. To adjust EQ settings to reduce or enhance bass while wearing earplugs, press
and hold volume up and down buttons simultaneously.
3. Switch EQ to normal condition when you take out the earplugs.
How To Reset Your Headphones
1. Start with your headphones off
2. Enter pairing mode by pressing and holding volume+ until Audrey says “Pairing”
and the LED light flashes red and blue.
3. Press and hold the multifunction button, volume+ button and volume- button
(all three buttons) simultaneously for 3-5 seconds, until you hear two beeps or
feel vibrations.
4. Turn your headphones off. Trekz Air is now reset and can be re-paired to your device.
More information:
bit.ly/ASMultipoint
Volume Up / Power Button (B); Volume Down Button (C)
Multipoint pairing allows Trekz Air to be connected to two devices at once,
allowing users to seamlessly transition between the two.
1. Start with your headphones off.
2. Press and hold volume+ until Audrey says “Pairing” and the LED light flashes red and blue.
3. Press and hold the multifunction button and volume+ button for 3 seconds.
Audrey says "Multipoint Enabled."
4. Open your first device's Bluetooth menu and select Trekz Air by AfterShokz.
Audrey says "Connected"
5. Turn your headphones off.
6. Re-enter pairing mode by pressing and holding volume+ until Audrey says “Pairing” and
the LED light flashes red and blue.
7. Open your second device's Bluetooth menu and select Trekz Air by AfterShokz.
Audrey says "Connected."
8. Turn your headphones off.
9. Turn your headphones on, Your headphones are now connected to both devices.
Muiltipoint Pairing
Bluetooth® version Microphone
Sensitivity
100 ± 3dB
-40dB ± 3dBBluetooth® v4.2
Warranty
Weight
Battery
2 years
1.06 oz
Up to 20 days
2400MHz~2483.5MHz 4dBm
A2DP, AVRCP, HSP, HFP
Frequency band Maximum output power
Continuous play Standby time
Charge time
Compatible profiles
Battery Capacity
Maximum Charge Voltage
Speaker Impedance
5.25 V
11.4 omh
Water-resistance IP55
183 mAh
Rechargeable lithium ion
Up to 6 Hours
2 hours
Wireless range
33 ft (10m)