Shenzhen Wuxiang Testing (Group) Co., Ltd. Report No.
Shenzhen Wuxiang Testing (Group) Co., Ltd. Report No.WUX202110215313UL UL 2849 TEST REPORT Standard: UL 2849-2016 Report No.: WUX202110215313UL Client: Longxiang Group Limited Product: Electric bike Rated input 100-240V~50/60Hz,2.2A(MAX.) Project Engineer: Tony Bi Rated output DC 54.6V Test Engineer: Bailey Luo Protection class -- Application Date Oct. 21, 2021 Protection against moisture: Min. IP44 Requested Date Oct.
Shenzhen Wuxiang Testing (Group) Co., Ltd. No.1 Report No.WUX202110215313UL Clause(s) Test(s) Remark Comment 7 Connection to Supply Source UL 1310 Pass 8 Personnel Protection Systems UL 2231-1 Pass 9 Bonding of the Vehicle Screw to fix. Pass 10 Double Insulation UL 1310 for adaptor Pass 11 Safety Circuits and Safety Analysis UL 60730-1 Pass 12 Enclosures Min.
Shenzhen Wuxiang Testing (Group) Co., Ltd. Report No.
Shenzhen Wuxiang Testing (Group) Co., Ltd. Report No.WUX202110215313UL Spacings (15) 13 Pass Electrical Spacings Clearance (cl) and creepage distance (cr) at/of/between: U peak (V) U r.m.s. (V) Required cl (mm) cl (mm) Required cr (mm) cr (mm) opposite polarity of battery -- 54.6 2.2 >3.1 2.2 >3.
Shenzhen Wuxiang Testing (Group) Co., Ltd. Report No.WUX202110215313UL INPUT TEST (28) Method: EUT is operating at: U=Un, F=Fn. Load of the EUT is under maximum normal load. The input current and wattage to the EUT shall be measured. Multiple rated voltages or rated voltage range, each rated voltage shall be measured. The current and power shall be taken under steady state conditions. Result: 28 TABLE: Electrical data (in normal conditions) [ X ] Max.
Shenzhen Wuxiang Testing (Group) Co., Ltd. Report No.WUX202110215313UL Leakage Current (29) 29 Leakage Current Test voltage: Pass 100V/ 60Hz Measured point: U2 (mV) (mA) Limit (mA) Line and output accessible terminal -- 0.12 0.5 Neutral and output accessible terminal -- 0.11 0.5 Line and accessible enclosure surface -- 0.09 0.5 Neutral and accessible enclosure surface -- 0.09 0.
Shenzhen Wuxiang Testing (Group) Co., Ltd. Report No.WUX202110215313UL Temperature Test (31) Method: EUT primary is U=Un, F=Fn, operated under normal max. load. Temperatures of parts are measured by thermal couplers, windings are measured by resistance change method. Measuring place shall be a point close to the heat source. The test is continued until thermal stable. Voltage is changed lower or higher tolerance without rest of time. Result: 31 TABLE: Thermal requirements, Supply voltage (V) ..........
Shenzhen Wuxiang Testing (Group) Co., Ltd. -- -- -- Report No.WUX202110215313UL -- -- -- -- -- Supplementary information: - NF: No Fire - NE: No Explosion - NL: No Leakage - NR: No Rupture - NS: No Electric shock hazard - Fire: the emission of flames from a cell or battery. - Explosion: failure that occurs when a cell container or battery case opens violently and major components are forcibly expelled. - Leakage: visible escape of liquid electrolyte.
Shenzhen Wuxiang Testing (Group) Co., Ltd. Supplementary information: Temperature T of winding: -- Report No.WUX202110215313UL t1 (°C) R1 () t2 (°C) R2 () T (C) Allowed Tmax (C) Insulatio n class -- -- -- -- -- -- -- Supplementary information: - NF: No Fire - NE: No Explosion - NL: No Leakage - NR: No Rupture - NS: No Electric shock hazard - Fire: the emission of flames from a cell or battery.
Shenzhen Wuxiang Testing (Group) Co., Ltd. Supplementary information: Temperature T of winding: -- Report No.WUX202110215313UL t1 (°C) R1 () t2 (°C) R2 () T (C) Allowed Tmax (C) Insulatio n class -- -- -- -- -- -- -- Supplementary information: - NF: No Fire - NE: No Explosion - NL: No Leakage - NR: No Rupture - NS: No Electric shock hazard - Fire: the emission of flames from a cell or battery.
Shenzhen Wuxiang Testing (Group) Co., Ltd. Report No.WUX202110215313UL Dielectric Voltage-Withstand Test (32) Method: The test is made while the EUT is still in well-heated condition Make sure the power switch of the EUT is in ON position. Thin material can be tested in room temperature. The test voltage is a.c. of 50 or 60 Hz or d.c. voltage equal to peak value of the a.c. voltage. Test voltage is applied gradually raised from zero to the specified voltage and held at that value for 60s.
Shenzhen Wuxiang Testing (Group) Co., Ltd. Report No.WUX202110215313UL Isolation Resistance Test (33) Method: The test is made while the EUT is still in well-heated condition Make sure the power switch of the EUT is in ON position. Thin material can be tested in room temperature. The test voltage is d.c. 500 voltage Test voltage is applied gradually raised from zero to the specified voltage and held at that value for 60s.
Shenzhen Wuxiang Testing (Group) Co., Ltd. Report No.WUX202110215313UL Humidity Conditioning (34) 34 Humidity Conditioning Test Test voltage: Pass 48h, 90%R.H.
Shenzhen Wuxiang Testing (Group) Co., Ltd. Report No.
Shenzhen Wuxiang Testing (Group) Co., Ltd. U2 pin 3-4 Test voltage: _DC48V_ Duration: _10min_ SC No: __ I/P current (A): _0.09_ I/P power (W): _0_ Battery Test voltage: _DC48V_ Duration: _5min_ SC No: _ _ I/P current (A): _0_ I/P power (W): _0_ Adaptor output Test voltage: AC48V_ Duration: _10min_ SC No: _ _ I/P current (A): __ I/P power (W): _0.01_ Locked Motor Test voltage: _48V_ Duration: _1h_ Fuse or Fuse resistor No: _ _ I/P current (A): _Max. 2.9A_ I/P power (W): _0_ Report No.
Shenzhen Wuxiang Testing (Group) Co., Ltd. Report No.
Shenzhen Wuxiang Testing (Group) Co., Ltd. Report No.WUX202110215313UL Impact Test (37) TABLE: Strain relief test 37 Pass Test part Temperature (℃) Duration (h) Enclosure 70 1h Result Pass electrical strength Notes: Oven temperature shall be 10 K higher than the maximum temperature on the enclosure but not less than 70°C. supplementary information: - NF: No Fire - NE: No Explosion - NL: No Leakage - Fire: the emission of flames from a cell or battery.
Shenzhen Wuxiang Testing (Group) Co., Ltd. Report No.WUX202110215313UL Water Exposure Tests (38.1) Test procedure For IPX4, the sample is positioned under oscillating spray tubes rotating at nearly±180° from the vertical for 10 minutes. The oscillation rate is two cycles of about360° in 12 seconds.
Shenzhen Wuxiang Testing (Group) Co., Ltd. Report No.WUX202110215313UL Thermal Cycling Test (38.2) 39 Sample TABLE: Heating Test OCV at start of test, (Vdc) Temperature raise rated(°C/min) Test temperature (°C) 50 to -300 Duration (h) 1# Full battery 6h 5℃/min ± 2 ℃/min Supplementary information: supplementary information: - NF: No Fire - NE: No Explosion - NL: No Leakage - Fire: the emission of flames from a cell or battery.
Shenzhen Wuxiang Testing (Group) Co., Ltd. Report No.WUX202110215313UL Mold Stress (42) 37 TABLE: Strain relief test Pass Test part Temperature (℃) Duration (h) Enclosure 70 1h Result Pass electrical strength Notes: Oven temperature shall be 10 K higher than the maximum temperature on the enclosure but not less than 70°C. supplementary information: - NF: No Fire - NE: No Explosion - NL: No Leakage - Fire: the emission of flames from a cell or battery.
Shenzhen Wuxiang Testing (Group) Co., Ltd. Report No.WUX202110215313UL Permanence of Marking (43) 43 MARKING DURABILITY Type of marking Rating label Durable and legible 15 seconds of water 15 seconds of petroleum Pass Fail -- -- √ -- Stop watch Shenzhen Wuxiang Testing (Group) Co., Ltd. Page 22 of 25 Web: www.szcttlab.com Tel: 86-755-23592524 E-mail: ctt@szcttlab.
Shenzhen Wuxiang Testing (Group) Co., Ltd. Photo documentation Report No.WUX202110215313UL Photo 1 Over view Photo 2 Over view Shenzhen Wuxiang Testing (Group) Co., Ltd. Page 23 of 25 Web: www.szcttlab.com Tel: 86-755-23592524 E-mail: ctt@szcttlab.
Shenzhen Wuxiang Testing (Group) Co., Ltd. Report No.WUX202110215313UL Photo 3 Over view Photo 4 Over view Shenzhen Wuxiang Testing (Group) Co., Ltd. Page 24 of 25 Web: www.szcttlab.com Tel: 86-755-23592524 E-mail: ctt@szcttlab.
Shenzhen Wuxiang Testing (Group) Co., Ltd. Report No.WUX202110215313UL Photo 5 Over view Photo 6 Over view Shenzhen Wuxiang Testing (Group) Co., Ltd. Page 25 of 25 Web: www.szcttlab.com Tel: 86-755-23592524 E-mail: ctt@szcttlab.