User manual
Installation, Use, and Maintenance Notice AFIRE devices standard compliance: Original AWO Line: Commercial references: AWO 20-50, AWO 40-100, AWO 60-150 Premium AWP Line: Commercial references: AWP 20-50, AWP 40-100, AWP 60-150 XXL Line: Commercial references: AWX 40-100, AWX 60-150 AWA Corner Line, AWB Line, AWD Line, AW-VIP comply with: - European directives: 2004/108/EC EN 55014-1 :2006+A1 :2009+A2 :2011 EN 55014-2 :1997+A1 :2001+A2 :2008 EN 61000-3-2 :2006+A1 :2009+A2 :2009 EN 61000-3-3 :2013 - Part
The device must be installed in compliance with the instructions in paragraphs 3, 4, and 5. Users are prohibited from interfering with the safety systems. Installation and use of the devices are subject to the rules and procedures for use in the country where the devices are installed. Do not use the device if it is damaged after falling or any other reason. Contact AFIRE aftersales service. Do not let children or disabled persons use the device without supervision. Do not use outdoors.
Models A Length B Width C Height AWP20-50 508mm(20in) 326mm(12.83in) 300mm(11.81in) AWP40-100 / AWX40-100 1016mm(40in) 326mm(12.83in) 300mm(11.81in) AWP60-150 / AWX60-150 1524mm(60in) 326mm(12.83in) 300mm(11.81in) AWO20-50 508mm(20in) 326mm(12.83in) 235mm(9.25in) AWO40-100 1016mm(40in) 326mm(12.83in) 235mm(9.25in) Models Reservoir capacity Autonomy Electric power Liter Gallon Hour Watt KG LBS.
Device equipped with exterior connection (dry contact) to allow for remote operation with a distant switch or by a smart-home installation. Never start or use a device without supervision. Device equipped with a Wi-Fi application for smartphones. 3. PRECAUTIONS FOR INSTALLING THE DEVICE IN ITS ENVIRONMENT: Do not play any object on the device while operating. Leave access to the control components free. Do not use in a room with air currents. 4.
Embedding dimensions: References A Length B Width C Depth AWP 20-50 514mm(20.24in) 314mm(12.36in) 328mm(12.91in) AWP 40-100 1022mm(40.24in) 314mm(12.36in) 328mm(12.91in) AWP 60-150 1530mm(60.24in) 314mm(12.36in) 328mm(12.91in) AWO 20-50 514mm(20.24in) 314mm(12.36in) 263mm(10.35in) AWO 40-100 1022mm(40.24in) 314mm(12.36in) 263mm(10.35in) 6.
The ON/OFF button turns the device on and off. Button B1 is used to fill the reservoir with water. Button B2 is used to empty the device. Hold the button for 5 seconds to start the pumps. Press once to stop the pumps. The stainless-steel “Tube” connection connects to the plastic hose provided to fill and empty the device. ATTENTION: The water used must be perfectly clean with no dust or reside that may clog the hydraulic system. This point is very important for the operation of your device.
Direct connection to the water network ¼” D- Using the device AFIRE devices have several control possibilities. 1-Manual (On/Off button) 2-With a smartphon app (certain ranges only) A) Install the app onto your smartphone If you use Android, search for the AFIRE app on Google-Play. IF you use iOS, search for the AFIRE app on the App Store. B) Sign up C) Start the app D) Enter your email address and your password. You must use upper and lower-case letters and numbers.
Tap “Sign up” The screen will show “Device” E) Detect your device 1- Tap + (at the top right) and then tap Wifi config (enter the Wi-Fi password if applicable). Simultaneously press the On/Off button and button B1 of your fireplace module until they flash. Then, tap the “Start” button on your smartphone screen. Detection should take 10 to 20 seconds. Your telephone will then indicate that the device has been detected. Select “Afire” and confirm with the Confirm button on your smarthphone screen.
Next, simply tap the AFIRE icon on your smartphone to get to the app function screen. Of course, your Wi-Fi will need to be working. .8. CONNECTION SEVERAL DEVICES TO CREATE A FIRE LINE Choose one of the deivces that will be the MASTER receiver. All the other devices will be SLAVES that depent on this MASTER for control. You can choose any of your devices to be the MASTER. When you receive your devices, they are all MASTERS.
All cleaning and maintenance operations must be done with the device switched off. Occasionally clean the visible parts with a soft cloth. Never interfere with the safety or electronic systems. Contact us or an authorized specialist. Some components are required to ensure the safety and proper operation of the device. Their replacement may modify the performance of your device. Only original components should be used for maintenance or repair operations.