User Manual Model: 99MO122011
● Package Contents ○ 1 x SnapTo Wireless Charger ○ 1 x Wall Mount Kit ○ 1 x USB-C to USB-A Cable ○ 2 x SnapTo Tabs ○ 1 x Quick start guide ● Install the SnapTo tabs ○ Remove the plastic placeholder tabs from your Moshi case. ○ Peel the adhesive liner from the SnapTo metal tab. ○ Place the tab into your case and press firmly for 30 seconds. ○ Repeat for the 2nd tab.
○ Charging automatically begins after attaching your phone (installed in a Moshi S napTo case) to the SnapTo Wireless Charger. ● How to remove the wall mount kit ○ Pull the white adhesive strip down (not towards you) and pull slowly to release th e wall mount kit. The adhesive strip may stretch up to 12 in (30 cm) before the m ount releases from the wall. ● LED behavior ○ Pull the white adhesive strip down (not towards you) and pull slowly to release th e wall mount kit.
FCC Caution: To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). This device complies with Part 15 of the FCC Rules.
