PEGATRON proprietary and confidential Aetheros_L+G cable assembling 20200609
L+G Cable design concept summary Rubber for the hole on metal box Waterproof design of metal box. (Dimension: 15mm) Will change to block in next shipment to fit meter color. Mold on the meter (Plastic) To avoid connector drop if someone pull the cable. Mold on connector of meter side (Plastic) To avoid incorrect assembling in the field.
Cable finish good 3
Rubber for the hole on metal box Design concept Assembling SOP 1. Put the rubber into the hole drilled on the metal box. 2. Finished.
Mold on the meter Design concept Cable molding Assembling SOP 1. Put the mold into the hole on meter cover. Side view 2. Assemble the top cover on the meter. Finished.
Mold on connector of meter side Design concept There is a step design to avoid incorrect direction. Assembling SOP 1. Plug in the 8pin connector on cable into 18pin header on meter. Finished. 8 pin connector molding 18 pin connector on meter Meter PCBA 2. Finished. Note: if the 8pin cable assembling opposite, it will interfere with meter PCBA.
Finish v Put the meter top cover on.