Product Manual

No. 48209 - 02/13
SPRA-TOOL® DELIVERY SYSTEM
PRODUCT NUMBERS: 8209 - SPRA-TOOL KIT
8211 - SPRA-TOOL POWER PACK
8212 - SPRA-TOOL JAR WITH CAP
8213 - SPRA-TOOL SNAP ON HEAD
I. GENERAL DESCRIPTION
Description: This completely portable, fast, economical
and disposable product compares with commercial spray
guns. The #8209 Spra-Tool Kit consists of a #8212 Jar
jar with graduated markings, #8213 Snap On Head
with three spray tips with different size openings, and
the #8211 Power-Pak. The unique atomizing propellant
blend is capable of spraying most any liquid that can be
thinned or as is.
Benefits: This completely portable spray package
can be used to paint, lubricate or clean a variety of
objects and surfaces without the need of expensive
or time consuming spray equipment. Achieve smooth,
professional results and even coverage at a fraction of
the cost of a commercial sprayer. Ideally suited to apply
paints, lacquers, stains, cleaners, and any liquid no
more viscous than kerosene. Use anywhere on-board
boats and trucks; use with mold releases, disinfectants,
fertilizers, insecticides, and much more.
Applications: Use to coat metal, wood, fiberglass,
plastics and rubber. The Power-Pak is a hydrocarbon
blended propellant that optimizes atomization and spray
pressure. Clean and/or lubricate de-energized power
equipment, hinges, rollers, tools, gears, pulleys and more!
Directions: #8209 Spray-Tool Kit: Snap the Spray Tool
head onto the Power-Pak, making sure the prongs of the
head are inside the lip of the Power-Pak. Fill the plastic
jar with the liquid to be sprayed and screw the jar into the
threaded sprayhead. Hold the unit upright 6" - 10" from
the object to be sprayed. Spray with a side to side motion.
After continuous use the Power-Pak may become chilled
and lose pressure. Restore the Pak to full pressure by
allowing the can to return to room temperature. #8213
Spra-Tool Snap On Head: Choose the spray tip that
corresponds to the product intended to be sprayed. Follow
directions as outlined above. Clean up is done by spraying
solvent or thinner from the jar through the dip tube, spray
head tips and unit. Store cleaned unit for future use.
Limitations: Please refer to the Safety Data Sheets for
specic information on material hazards, etc.
Packaging:
Aerosol: Cans (211 x 413) 6.5oz. net wt.(184g) 11.7 . oz. (346 ml)
#8209 Spra-Tool Complete (6/cs) 6 lbs(2.72kg) 0.38 CF (0.011 CM)
#8211 Spra-Tool Power-Pak 12 lbs (5.4kg) 0.38 CF (0.011 CM)
#8212 Spra-Tool Jar w/cap (12/cs) 12 lbs (5.4kg) 0.22 CF (0.006 CM)
#8213 Spra-Tool Snap-on Head (1/cs) 1 lbs (0.45kg) NA(NA)
Product Data Sheet
Aervoe Industries, Inc.
P.O. Box 485, Gardnerville, NV 89410
[phone] Phone • [phone] Fax • [phone] Customer Service
www.aervoe.com • [e-mail]