Product Manual

No. 3399 - 02/12
LFP CLEANER/DEGREASER HD
PRODUCT NUMBERS: 398 - 18 FL. OZ. TRIGGER SPRAY
399 - 15 OZ. NET WT. AEROSOL
I. GENERAL DESCRIPTION
Description: A high delivery, fast-drying, industrial
strength solvent for cleaning and degreasing. Removes
grease, oil, wax, adhesives and other contaminants
without leaving a residue. High-pressure spray action
combined with unique wetting action, penetrates and
degreases in inaccessible cracks and crevices. #398
uses an any-way trigger sprayer for application in any
direction, including upside down.
Benets: Aervoe #398 and #399 reduce failures and helps
to increase equipment life by eliminating faulty operation
of dirty moving parts. Non-corrosive, non-conductive
formula that displaces moisture. High dielectric strength
of 33 kV. Contains no chlorinated solvents. Although
ammable, they are safe to use in non-heat electrical
exposure. Does not require water wash-off. With the
#398 application in any direction is possible, including
upside down and horizontal positions.
Uses: Use on motors, tools, machinery, metal parts,
mechanical equipment, air conditioners, aircraft parts,
automotive parts, bearings, cycle chains, packaging
machinery, compressors, generators, portable tools, ofce
machinery, pumps, mechanical brakes and clutches,
relays, sporting equipment and solenoids.
Application: Aerosol: Spray on and let dry. Do not
rinse off. Attach extension tube for pinpoint accuracy
with minimum over spray. Test a small area to assure
compatibility on painted surfaces, specialty rubber,
plastics, and laminates. Not for use on polycarbonate
plastics or sensitive electronic equipment. For best
ushing action, spray from a distance of 4 to 6 inches.
Allow to air dry, or dry with a clean dry cloth. Trigger
Spray Can: Remove cap and attach trigger sprayer.
Tighten securely on threaded tment. Spray nozzle can
be adjusted for stream or mist application and may be
sprayed in any direction. Bulk: Apply with clean sprayer,
cloth, or by dipping. Do not use on electrical equipment or
machinery while in operation. Wait 5-10 minutes to allow
solvents to evaporate before energizing equipment.
Limitations: Please refer to the Material Safety Data
Sheet for specic information on material hazards, etc.
At temperatures below 40°F (4°C). Aerosol pressure is
diminished. Check surface compatibility by testing small
area rst; product may affect certain rubber, plastic and
painted surfaces. DO NOT USE ON HOT SURFACES.
DO NOT USE ON ENERGIZED EQUIPMENT. For use
in manufacturing facilities.
Product Data Sheet
Aervoe Industries, Inc.
P.O. Box 485, Gardnerville, NV 89410
0HONEs&AXs#USTOMER3ERVICE
WWWAERVOECOMsMAILBOX AERVOECOM
AEROSOL AND BULK LIQUID
Product number 399 plus letter designation is as follows:
G = 2 one-gallon cans; F = 1 ve-gallon pail; D = 50 gallon drum
Packaging:
Aerosol: Cans (211x713) 15 oz. Net wt. (425 grams) 18.1 . oz. (535 ml)
12 cans/case 16 lbs. (7.3 kg) 0.55 CF (0.016 CM)
Trigger Spray Can: Cans (211x713) 1.1 lb. (0.51 kg) 18 . oz. (532 ml)
12 cans/case 13 lbs (6 kg) 0.55 CF (0.016 CM)
Bulk: 2 gallons/case 16 lbs. (7.3 kg) 0.50 CF (0.014 CM)
5-gallon pail 37 lbs. (16.8 kg) 1.2 CF (0.034 CM)
50-gallon drum 366 lbs. (166.2 kg) 8.5 CF (0.24 CM)