T3s Staff Tag USER GUIDE REV1.
Disclaimer The information and know-how included in this document are the exclusive property of STANLEY Healthcare and are intended for the use of the addressee or the user alone.
T3s Staff Tag Table of Contents Overview........................................................................................................................ 4 Tag Descriptions ........................................................................................................... 5 T3s Tag Features............................................................................................................ 5 Attachment Options ..........................................................................
T3s Staff Tag REVISION HISTORY Revision Date Comments Author 1 19 January 2014 New Document K Oberstein 2 10 March 2014 Update K Oberstein 3 4 User Guide 3
T3s Staff Tag Overview The T3s Tag is based on STANLEY Healthcare’s market leading T2 Wi-Fi Tag, with its proven usability, dependability and scalability. These battery-powered tags are worn by hospital staff. This enables staff to be accurately located in real-time and in any environment – from indoor locations such as hospital floors to open outdoor spaces such as parking lots.
T3s Staff Tag Tag Descriptions The following describes the parts of the T3s Tag: Front View Flange LED Call Button Back View Ultrasound Battery Cover Retractable Reel socket Attachment Plate Figure 2: Tag Descriptions T3s Tag Features Wi-Fi Compatibility T3s Tags use any standard Wi-Fi network infrastructure, keeping costs low and making deployments simple and fast. The tags can be used to determine the location and status of hospital staff.
T3s Staff Tag Long Battery Life The T3s Tag has a single, replaceable battery. The tag is able to report its battery level to MobileView. The T3s Tag also has a motion sensor to conserve battery life when the tag is not in motion. Room-Level Separation and Egress Point Detection The T3s Tag includes embedded Low-Frequency (LF) receiver and an optional Ultrasound receiver. Ultrasound signals do not go through walls and thus ensure accurate room-level resolution when and where required (e.g.
T3s Staff Tag Attachment Options The T3s Tag has various attachment options. The tag is fitted with a flange enabling it to be clipped on a pocket, using a badge clip, or it can be worn around a staff member’s neck, using a lanyard. Other attachment options include a retractable reel and retractable reel with back clip. Flange for tag attachment Tag Management T3s Tags are easily configured and activated wirelessly via the Tag Manager application and a Tag Activator device.
T3s Staff Tag Blue LED The following table describes the LED indications for the T3s Tag. LED Indication Description Blue Power Tag Maintenance Tag Battery Life Table 1 presents battery life estimates for a new T3s tag battery. The parameters that affect battery life include the tag transmission interval and the number of transmission channels configured for the tag. Note The calculations in the table below are true for an operating temperature of 20ºC.
T3s Staff Tag Changing the Battery The T3s Tag contains a 3.6V Lithium ½ AA replaceable battery. To Replace the Battery: 1. Remove the battery cover by unscrewing the two (2) cover screws. 2. Remove the battery. 3. Install a new 3.6V Lithium ½ AA battery in the battery holder. 4. Close and re-screw the panel to the tag casing. WARNING: Used batteries should be disposed of according to facility procedures in your jurisdiction.
T3s Staff Tag Tag Accessories Accessory Model Retractable reel with back clip SKU: TAC-363 Retractable reel without back clip SKU: TAC-362 Lanyard SKU: TAC-361 Badge Clip SKU: TAC-360 AeroScout Tag Management Suite SKU: BWH-1000-02-TA Specifications Tag Specifications Range Outdoor range: Up to 200m (650 feet) Indoor range: Up to 80m (260 feet) Physical and Mechanical Dimensions (incl. Flange): 80mm x 40.6mm x 20mm (3.14in x 1.60in x 0.8in) Weight (Incl.
T3s Staff Tag Ingress Protection Rating: IP-65 Battery: 3.
T3s Staff Tag Safety, Warnings and Warranty FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
T3s Staff Tag Stanley Healthcare (“Stanley”) Standard Warranty and Disclaimer For Stanley Healthcare AeroScout® Products (“Products”) Limited Warranty and Disclaimer. Stanley warrants that commencing from the date of delivery to Customer and continuing for a period of one (1) year thereafter (the “Warranty Period”), the hardware components of Stanley Healthcare AeroScout® Products (the “Hardware”) will be free from defects in material and workmanship under normal use subject to the terms hereof.
T3s Staff Tag WARRANTIES, REPRESENTATIONS AND CONDITIONS, INCLUDING WITHOUT LIMITATION ALL WARRANTIES AND CONDITIONS OF QUALITY, NON-INFRINGEMENT, MERCHANTABILITY AND SUITABILITY OR FITNESS FOR A PARTICULAR PURPOSE TO THE EXTENT PERMITTED BY LAW. STANLEY WILL NOT BE LIABLE FOR CONSEQUENTIAL, INCIDENTAL, INDIRECT OR PUNITIVE DAMAGES FOR ANY CAUSE OF ACTION, WHETHER IN CONTRACT, TORT OR OTHERWISE.
About STANLEY Healthcare STANLEY Healthcare provides over 5,000 acute care hospitals and 12,000 long-term care organizations with enterprise solutions that transform safety, security and operational efficiency. The STANLEY Healthcare solution set enables customers to achieve organizational excellence and superior care in five critical areas: Patient Safety, Security & Protection, Environmental Monitoring, Clinical Operations & Workflow and Supply Chain & Asset Management.
