AeroScout T2 T2s Tag User Guide T2S-UG UG-080910-01
Disclaimer The information and know-how included in this document are the exclusive property of AeroScout Inc. and are intended for the use of the addressee or the user alone.
AeroScout T2s Tag Table of Contents Introduction.........................................................................................................................5 T2s Tag Features .................................................................................................................6 Tag Mounting......................................................................................................................8 Removing Tags .............................................................
AeroScout T2s Tag REVISION HISTORY Revision Date Comments Author 1 08 September 2010 New Document E Prigat Document History 4
AeroScout T2s Tag Introduction The AeroScout T2s Tag is a key component of the AeroScout Visibility System. The T2s Tag is a small Wi-Fi Fi and active RFID device that enables the wireless network infrastructure to locate assets not connected to a wireless network. The tag can be attached to people and to a variety of equipment, such as medical devices, containers, manufacturing equipment and vehicles.
AeroScout T2s Tag Figure 2. AeroScout T2s Tag with a strap T2s Tag Features Motion Sensing AeroScout T2s Tags contain on on-board board motion sensors. The motion sensor can be configured to trigger alerts. It also enables different transmission intervals for tags when they are stationary ry or in motion – which reduces unnecessary network traffic and conserves battery life.
AeroScout T2s Tag Ultrasound Receiver The T2s Tag can be equipped with an ultrasound receiverthat picks up the ultrasound transmissions of EX4100 and EX4200 Ultrasound Exciters. The tag transmits the Exciter ID over the Wi-Fi network. The tag is equipped with a proprietary dilution algorithm that extends battery life.
AeroScout T2s Tag Rugged Performance AeroScout Tags are designed to function in harsh work environments and weather conditions. The tag enclosure is water water-resistant, including immersion (IP-67) 67) and designed to withstand significant physical shoc shocks. Tag Mounting The AeroScout T2s Tag is enclosed in a compact case and offers a variety of mounting options described in this section. Wrist Strap Optional accessory - Can be used to strap the tag around the wrist. Figure 3.
AeroScout T2s Tag Figure 4. AeroScout badge clip mount Follow these steps: 1. Snap the badge clip mount to the back of the tag. 2. Strap a badge clip to the flange. Figure 5. AeroScout T2s Tag with badge clip mount Magnetic Mount This optional accessory allows mounting T2s Tags to person's shirt or scrubs,, using a magnetic mount.
AeroScout T2s Tag Figure 6. Magnetic Clip Follow these steps: 1. Snap the tag to the magnetic clip. 2. Use the opposite plate to attach the tag to the scrubs or the shirt. Figure 7. T2s Tag on a shirt using a magnetic clip Using the Mounting Cradle The mounting cradle allows you to fix the tag on surfaces where it cannot be attached using the adhesive material or the strap. Using the cradle, tags can be easily removed and replaced without the need to handle adhesives.
AeroScout T2s Tag Figure 8. 2. Snap the tag into the cradle. Securing the Tag to the Cradle After snapping the tag into the cradle it is possible to secure the tag to the cradle using two straps. 1. Thread the cradle strap through the upper and lower strapping holes and the tag's upper and lower flanges. Figure 9. 2. Thread the cradle strap through the strapping holes and the tag's back rail.
AeroScout T2s Tag Figure 10. 3. Tie the strap around the front of the tag. Attaching the Cradle to a Pole You can attach the cradle to a pole using two narrow straps. Follow these steps: 1. Thread the cradle strap through the two pairs of strapping holes. Figure 11.
AeroScout T2s Tag 2. Tie the straps to the pole. 3. Snap the tag into the cradle (or first tie the tag to the cradle and then attach it to the pole). Figure 12. Removing Tags Removing a Tag from a Cradle The cradle holds the tag tightly. To detach the tag from the cradle, press the two knobs of the cradle from both sides using your fingers. Figure 13.
AeroScout T2s Tag Tag Management The AeroScout T2s Tag can be configured, programmed and activated via a wireless interface. This is done with the help of the AeroScout Tag Manager application and the AeroScout Tag Activator. In addition, Tag Manager is used to activate and deactivate tags and to program stored messages on the tags. The Tag Manager functions can also be activated via APIs that enable easy integration with third-party party applications. Note Use Tag Manager Software version 4.04.
AeroScout T2s Tag To replace a battery: 1. Deactivate the tag with Tag Activator and Tag Manager (recommended). 2. Remove the rear panel by unscrewing the case screws. 3. Disconnect the battery connector from the board 4. Carefully remove the old battery from the battery holder. Do not use a metal object to remove the battery Note 5. Connect the battery connector to the board. 6. Install a new 3.6V lithium Thionyl Chloride ½ 'AA' size battery in the battery holder.
AeroScout T2s Tag Tag Battery Life Table 1 presents battery life estimates for a new T2s tag battery. The parameters that affect battery life include the tag transmission interval and the number of transmission channels configured for the tag. Note The calculations in the table below are true for an operating temperature of 20ºC. The calculations do not take into consideration additional factors such as Exciter activations of Tag, since these are individual parameters.
AeroScout T2s Tag AeroScout T2 Tag AeroScout T2s Tag with Ultrasound Receiver AeroScout T2s Tag with Ultrasound Receiver and Call Button Comments Model Includes 1/2AA Lithium battery, motion sensor and ultrasound receiver Includes 1/2AA Lithium battery, motion sensor, ultrasound receiver and a Call Button TAG-2300-U TAG-2300-CU Table 2 – Regular T2s Tag Models Tag Accessory Models Mounting Accessories Tag cradle Comments Model For attaching the tag to a pole or similar surface.
AeroScout T2s Tag Mounting Accessories Comments Model US Suite Includes 110/220v to 12v adapter (US) BWH-1000-02-TAU Europe Suite Includes 110/220v to 12v adapter (Europe) BWH-1000-02-TA-E Includes 110/220v to 12v adapter (Japan) BWH-1000-02-TA-J Includes 110/220v to 12v adapter (UK) BWH-1000-02-TAUK Japan Suite UK Suite Other Tag Battery 25-Pack TAC-230 Tag Battery 50-Pack TAC-231 Table 3 – Tag Accessory Models Specifications Tag Specifications Performance • Outdoor range: Up to 200m (6
AeroScout T2s Tag Environmental Specifications • Temperature: -30°C to +75°C (-22°F to 167°F) • Humidity: 0 to 100%, condensing • The housing is water and dust resistant and includes a rubber lining. • IP-67 Electrical • 3.
AeroScout T2s Tag Safety and Warnings FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
AeroScout T2s Tag Limited Warranty Hardware. AeroScout Inc. ("AeroScout") warrants that commencing from the date of delivery to Customer and continuing for a period of one (1) year thereafter (the “Warranty Period”), the Hardware will be free from defects in material and workmanship under normal use subject to terms hereof. The date of shipment of a Product by AeroScout is set forth on the packaging material in which the Product is shipped.
About AeroScout AeroScout is the market leader in Unified Asset Visibility solutions. Clients improve operational efficiency and quality using AeroScout products that leverage standard Wi-Fi networks to track and manage the location, condition and status of mobile assets and people. AeroScout’s global customer base consists of leading hospital, manufacturing and logistics organizations, including many of the Fortune 500.