AeroScout T2 Tag User Guide T2-UG-201108-02
Disclaimer The information and know-how included in this document are the exclusive property of AeroScout Inc. and are intended for the use of the addressee or the user alone.
Table of Contents | 3 Table of Contents Introduction........................................................................................................ 5 T2 Tag Features ................................................................................................ 6 Tag Mounting .................................................................................................... 8 Wrist Strap .............................................................................................................
Introduction | 5 Introduction The AeroScout T2 Tag is a key component of the AeroScout Visibility System. The T2 Tag is a small Wi-Fi and active RFID device that enables the wireless network infrastructure to locate assets not connected to a wireless network. The tag can be attached to mobile equipment such as vehicles in parking lots, inventory in a manufacturing line, containers, forklifts and medical equipment in hospitals.
| T2 Tag Features Figure 3. AeroScout T2 Tag with Multi-LED Visual Indication (transparent enclosure) T2 Tag Features Temperature and Motion Sensing Tags are shipped with on-board motion sensors that report when it starts to move and whether it is in motion or not. Tags can optionally be equipped with temperature sensors that can report the changes in temperature or exceeded temperature thresholds.
T2 Tag Features | 7 Flexible Mounting and Usage Options The tag’s small size and weight, and convenient form factor, allow mounting on people and a variety of assets. Mounting accessories include wrist band, badge clip and mounting cradle. Other industry-specific mounting accessories are available, including infusion pump mounting accessories, fixed and temporary trailer mounts and more. Long Battery Life A powerful, replaceable battery provides power for a period of up to 4 years.
| Tag Mounting Tag Mounting The AeroScout T2 Tag is enclosed in a compact case and offers a variety of mounting options described in this section. Wrist Strap Optional accessory - Can be used to strap the tag around the wrist. Figure 4. AeroScout T2 Tag with Wrist Strap Velcro or Double-Sided Tape Apply the adhesive material at the back of the tag and fix the tag on the asset.
Tag Mounting | 9 Figure 5. 2. Snap the tag into the cradle. Securing the Tag to the Cradle After snapping the tag into the cradle it is possible to secure the tag to the cradle using a strap. Figure 6. 1. Thread the cradle strap through the middle strapping holes and through the tag's back rail.
| Tag Mounting Figure 7. 2. Tie the strap around the front of the tag. Attaching the Cradle to a Pole You can attach the cradle to a pole using two narrow straps. Follow these steps: 1. Thread the cradle strap through the two pairs of strapping holes. Figure 8. 2. Tie the straps to the pole.
Tag Mounting | 11 3. Snap the tag into the cradle (or first tie the tag to the cradle and then attach it to the pole). Figure 9. Removing the Tag from Cradle The cradle holds the tag tightly. Gently separate the tag from the cradle using a small screwdriver and then pull the tag out. Figure 10. Fixed Tag Trailer Mount An optional accessory, the Fixed Tag Trailer Mount is intended for permanently mounting the tags on top of trailers and containers.
| Tag Mounting Figure 11. Fixed Tag Trailer Mount Installing a Fixed Trailer Mount on a Trailer 1. Insert the Tag into the mount (with the thin side of the Tag first). Verify that the T2 Tag’s multifunctional attachment plate is not attached to the Tag on its back side. 2. Slide the Tag until it snaps into place. 3. Insert the holster cover until it completely sinks into the aperture.
Tag Management | 13 Tag Management The AeroScout T2 Tag can be configured, programmed and activated via a wireless interface. This is done with the help of the AeroScout Tag Manager application and the AeroScout Tag Activator. In addition, Tag Manager is used to activate and deactivate tags and to program stored messages on the tags. The Tag Manager functions can also be activated via APIs that enable easy integration with third-party applications.
| Tag Maintenance 4. Install a new 3.6V lithium Thionyl Chloride ½ 'AA' size battery in the battery holder. WARNING: Use only batteries listed in Table 1 or batteries that have been approved by AeroScout. There is a danger of fatal tag damage if the battery is replaced incorrectly or by an incorrect type. Dispose used batteries according to the instructions. 5. Close the rear panel. 6. Activate the tag. 7. Dispose of the old lithium Thionyl Chloride battery properly. WARNING: Local regulations vary.
Tag Maintenance | 15 Transmission Interval Estimated Battery Life for: 1 channel, 1 transmission repetition Estimated Battery Life for: 1 channel, 2 transmission repetitions Estimated Battery Life for: 3 channels, 1 transmission repetition Estimated Battery Life for: 3 channels, 2 transmission repetitions 1 second 64 days 33 days 22 days 11 days 5 seconds 275 days 151 days 104 days 54 days 10 seconds 1.27 years 275 days 195 days 104 days 30 seconds 2.33 years 1.64 years 1.
| T2 Tag Models Battery Life - AeroScout T2 Tag 4.5 4.0 3.5 Battery Life (years) 3.0 0C, 10C, 20C, -20C 2.5 30C, -30C 2.0 40C 1.5 70C -30ºC -20ºC 0ºC 10ºC 20ºC 30ºC 40ºC 70ºC 1.0 0.5 0.0 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Transmission Interval (minutes) Figure 15.
Intrinsically Safe T2 Tag Models | 17 Intrinsically Safe T2 Tag Models AeroScout T2 Tag AeroScout Intrinsically Safe T2 Tag for Gas Group IIB AeroScout Intrinsically SafeT2 Tag with Call Button for Gas Group IIB AeroScout Intrinsically Safe T2 Tag for Gas Group IIC AeroScout Intrinsically SafeT2 Tag with Call Button for Gas Group IIC AeroScout Intrinsically SafeT2 Tag for mining group I Comments Model Includes 1/2AA Lithium battery.
| Specifications Mounting Accessories Fixed Tag Trailer Mount T2 Tag Wrist Straps 50-pack Comments Model For permanent mounting on trailers/vehicles/equipment TAC-240 Sutitable for T2 Tags attachment to the wrist TAC-220 Velcro Attachment Kit 50pack Velcro Patches Double-sided Tape Attachment Kit 50-pack Adhesive Tape patches TAC-030 TAC-031 Tag Management Tag Management Suite Includes Tag Activator, Tag Manager Software and 110/220V to 5V adaptor US Suite Includes 110/220v to 5v adapter
Specifications | 19 Environmental Specifications • Temperature: -30°C to +75°C (-22°F to 167°F) • Humidity: 0 to 100%, condensing • The housing is water and dust resistant and includes a rubber lining. • IP-65 Electrical • 3.
| Specifications • Range Typical Accuracy Maximum Accuracy -30°C to 0°C ± 1 °C ± 2 °C 0°C to 70°C ± 0.5 °C ± 1 °C 70°C to 75°C ± 1 °C ± 2 °C Measured sensor data: Figure 16.
| 21 Safety and Warnings FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
| DISCLAIMER OF WARRANTY. EXCEPT AS SPECIFIED IN THIS WARRANTY, ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS, AND WARRANTIES INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NONINFRINGEMENT, SATISFACTORY QUALITY OR ARISING FROM A COURSE OF DEALING, LAW, USAGE, OR TRADE PRACTICE, ARE HEREBY EXCLUDED TO THE EXTENT ALLOWED BY APPLICABLE LAW.
