User's Manual

Stanley Healthcare Confidential and proprietary
Preliminary information – Subject to change. Ver. 1.0_DM
Stanley Healthcare TAG1200 Module Data Sheet
Small Form Factor Module that includes Wi-Fi Communication – For OEM Installation only
O v er vie w
The integration tag is designed for OEM only technology
partners who wish to embed Stanley Healthcare location
technology into their products.
K e y F ea tur es
Compact Form Factor
The TAG1200 module Tag is designed for OEM applications
that require assets location. The module is based on the
smallest asset tag of the Stanley Healthcare Tag family and it
includes additional mounting screws, enabling it to be easily
embedded into other product enclosures.
Wi-Fi Compatibility
Stanley Healthcare Tags are 802.11b/g/n compatible
working on the 2.4GHz band. The tag’s clear channel sensing
techniques avoid interference with Wi-Fi networks. The tag
supports Stanley Healthcare IBSS and Cisco CCX Location
beaconing protocols.
The TAG1200 module support Wi-Fi Bi-directional
communication to allow Over-the-Air firmware and
configuration upgrade using the Stanley Healthcare Mobile
View application.
Choke-Point Detection Capabilities
Using the Stanley Healthcare Exciter, distinct tag presence
can be automatically detected and behavior can be modified
as the tag passes through a choke point, such as a doorway
or gate. This includes turning tags on/off, or changing tag
transmission rates. In addition, choke points enable precise
real-time alerts, through the Stanley Healthcare MobileView
software.
Ultrasound Receiver
The TAG1200 module is equipped with an ultrasound
receiver that picks up the ultrasound transmissions from
EX4100 and EX4200 Ultrasound Exciters. The tag transmits
the Exciter ID to the Stanley Healthcare software via the Wi-
Fi network. Using the ultrasound communication the Stanley
Healthcare system can achieve room level accuracy.
Tag Management
The TAG1200 module Tag can be programmed via a wireless
interface using the Stanley Healthcare Tag Activator.
Together with the AeroScout Tag Manager software it allows
for easy and efficient Tag configuration, activation or
deactivation and programming. The tag can also be
programed over-the-air using the MobileView application.
FCC STATEMENT
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
a. Reorient or relocate the receiving antenna.
b. Increase the separation between the equipment and
receiver.
c. Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.
d. Consult the dealer or an experienced radio/TV
technician.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference
2. This device must accept any interference received,
including interference that may cause undesired
operation.