User's Manual

ManualsBrandsAerohive Networks ManualsElectronicsAccess Point

AP130 User Guide 1

AP130 User Guide

The AP130 wireless access point provides dual concurrent 2.4 GHz 802.11b/g/n and 5 GHz 802.11a/n/ac

radios for 2x2:2 MIMO (multiple input multiple output) antennas. These devices have built-in mounting

hardware that allows you to install them on a ceiling track or a wall. This guide covers the following topics

about the AP130.

• "AP130 Product Overview" on page 1

• "Hardware Components" on page 2

• "Safety Instructions and Site Hazard Warnings" on page 2

• "Installing the AP130" on page 3

• "Accessing the Reset Button" on page 5

• "AP130 LEDs" on page 5

• "Connecting to the Network" on page 5

• "Device, Power, and Environmental Specifications" on page 6

• "Compliance and Regulatory Information" on page 6

To register, get the latest product documentation, see compliance information, and download software

updates, visit www.aerohive.com/support

. For detailed hardware information about this device, visit

www.aerohive.com/quick.

AP130 Product Overview

This guide explains how to install the AP130 on a wall or flat surface, or to the tracks of a recessed ceiling, and

connect it to Aerohive HiveManager over the network.

Kit Contents, Required Accessories, and Tools

The AP130 kit includes the following items:

• AP130 chassis

•QuickStart Guide

• Diagonal mount bracket

• Hardware kit: Three wall mount screws with anchors, two security screws, and two cross-head screws

To install your AP130, you will need a crosshead screwdriver, a flat blade screwdriver, and a drill (for wall

mounts).

Summary of content (10 pages)

PAGE 1
® AP130 User Guide The AP130 wireless access point provides dual concurrent 2.4 GHz 802.11b/g/n and 5 GHz 802.11a/n/ac radios for 2x2:2 MIMO (multiple input multiple output) antennas. These devices have built-in mounting hardware that allows you to install them on a ceiling track or a wall. This guide covers the following topics about the AP130.
PAGE 2
Aerohive Networks Hardware Components The following illustration shows the AP130 hardware components. For detailed descriptions of these components and additional specifications, see the online Help for the AP130 at www.aerohive.com/quick. Status light Bracket mounts 0 ETHE PO Reset Security port Console port Reset button ETH0 port Safety Instructions and Site Hazard Warnings Read and follow these safety instructions and hazard warnings before installing an AP130.
PAGE 3
Aerohive Networks Refer to the following cautions and warnings when installing your AP130. Aerohive devices must be installed by a professional installer who is certified to install these types of devices and to ensure that they are properly grounded and meet applicable local and national electrical codes. Do not install the device in an environment where the operating ambient temperature might exceed the recommended ranges.
PAGE 4
Aerohive Networks Mount tab slot The mount clip flanges fit under the inside corners of the mount clips Mount tab M Mount tab slo Mount clip Slots for clip flanges under corners of mount clips Mount clip Mount tab 3. Hold the device upside down and slip the mounting tabs on the bracket over each side of the ceiling track. 4. Press the device gently against the ceiling track and rotate it until the mount clips click into place. 5.
PAGE 5
Aerohive Networks 4. Attach the mounting bracket to the back of the device with the Aerohive logo facing away from the device, as shown in the illustration for a ceiling mount. Slip the tabs on the device into the tab slots on the bracket. Rotate the bracket until the clips snap into place, and the flanges fit securely underneath the edge of the bracket mounts. To remove the bracket, press the clips until they disengage from the mounts on the chassis.
PAGE 6
Aerohive Networks Optional Accessories Aerohive offers a variety of AP130 accessories. Contact your sales representative for more information. Device, Power, and Environmental Specifications Understanding the range of specifications for the AP130 is necessary for optimal deployment and device operations. The following specifications describe the physical features and hardware components, the PoE requirements, and the temperature and humidity ranges in which the devices can operate.
PAGE 7
Aerohive Networks • Česky [Czech]: [Aerohive] tímto prohlašuje, že tento [AP130] je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. • Dansk [Danish]: Undertegnede [Aerohive] erklærer herved, at følgende udstyr [AP130] overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
PAGE 8
Aerohive Networks radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver.
PAGE 9
Aerohive Networks Industry Canada Statement: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
PAGE 10
Aerohive Networks Taiwan Compliance Information Aerohive AP130 Taiwan MPE Warning Aerohive AP130 NCC Statement (1) (5) 「經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能」。「低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾」。「不致造成違反低功率電波輻射性電機管理辦法之所有控制、調整及開關之使用方法」。「對任何可能造成違反管理辦法規定之調整予以警告，或建議由具有發射機維修專長之技術人員執行或由其直接監督及負責」。「對任何可能造成違反管理辦法之零件 ( 晶體、半導體等 ) 置換之警告」。 (6) 「電磁波曝露量 MPE 標準值 1mW/cm2，送測產品實測值為：___ mW/cm2」。 (2) (3) (4) (7