User's Manual

LT1110-200 Compliance Information

1.1 AGENCY IDENTIFICATION NUMBERS

Family US/FCC CANADA/IC

LT1110-200 KQL-1110200 2268C-1110200

LT1110-200 FAMILY

Part # Description Packaging

PRM240 (+23 dBm), Pluggable with U.FL connector PLG-U.FL

PRM241 (+23dBm), Pluggable with -1dBi integrated antenna PLG-ANT

1.2 APPROVED ANTENNA LIST

LT1110-200 family has been designed to operate with the antennas listed below and having a maximum gain

of 6dBd. The required antenna impedance is 50 ohms. To reduce potential radio interference to other users,

the antenna type and gain should be chosen so that the equivalent isotropically radiated power (e.i.r.p.) is not

more than that permitted for successful communication. The OEM is free to choose another vendor’s antenna

of like type and equal or lesser gain as an antenna appearing in the table and still maintain compliance.

Item Part Number Mfg. Type Gain

1 0915AT43A0026 Johanson Chip -1dBi

2 S467FL-6-PX-915S Nearson Dipole 2dBi

3 FG9026 Laird Technologies Omni 6dBd

4 YS8963 Laird Technologies Yagi 6dBd

1.3 FCC/ IC REQUIREMENTS FOR MODULAR APPROVAL

In general, there are two agency classifications of wireless applications; portable and mobile.

Portable – Portable is a classification of equipment where the user, in general, will be within 20 cm of the

transmitting antenna. Portable equipment is further broken down into two classes; within 2.5 cm of human contact

and beyond 2.5 cm. The LT1110-10 family is not agency approved for portable applications. The OEM is

required to have additional evaluation performed to receive this classification. Contact Laird Technologies for

more details.

PAGE 1
LT1110-200 Compliance Information 1.1 AGENCY IDENTIFICATION NUMBERS Family LT1110-200 US/FCC KQL-1110200 CANADA/IC 2268C-1110200 LT1110-200 FAMILY Part # Description Packaging PRM240 (+23 dBm), Pluggable with U.FL connector PLG-U.FL PRM241 (+23dBm), Pluggable with -1dBi integrated antenna PLG-ANT 1.2 APPROVED ANTENNA LIST LT1110-200 family has been designed to operate with the antennas listed below and having a maximum gain of 6dBd. The required antenna impedance is 50 ohms.
PAGE 2
Mobile – Mobile defines equipment where the user will be 20 cm or greater from the transmitting equipment. The antenna must be mounted in such a way that it cannot be moved closer to the user with respect to the equipment, although the equipment may be moved. This equipment has been approved for mobile applications where the equipment should be used at distances greater than 20 cm from the human body. 1.
PAGE 3
1.7 IC TRANSMIT ANTENNAS Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain as authorized for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.