user manual Compact 603 Register your Compact 603: .com www.
Compact 603 user manual Contents 1. Introduction 3 2. Important safety instructions 4 3. Controls and connections 3.1 Front side 3.2 Rear side 5 5 6 4. Starting up 4.1 Cabling and switching-on 4.2 Level adjustment 7 7 7 5. Functional characteristics 5.1 Equalization 5.2 Effects 5.3 Footswitch 5.4 Phantom powering 7 7 8 8 8 6. Technical specifications 9 7.
1. Introduction Welcome to B! Thank you for choosing the Compact 603. The Compact 603 is a professional, compact and powerful amplifier system. Especially developed for the enhancement of acoustic instruments it is nonetheless suitable for other instruments, even electrical ones. Our design concept was focused on the singer-/ songwriter who requires outstanding reproduction of his/her instrument and vocals yet needs a handy unit with gigbag which is easily portable (even via public transport).
2. Important Safety Instructions The following guidelines shall help minimize the risk of injury through fire or electric shock.
3. Controls and connections 3 1 3 2 5 4 11 12 13 14 15 10 6 7 8 4 6 8 Compact 603 9 IF_Compact603_20120529 3.1 Front side 1) input (ch.
1 line out send 2 Compact 603 3 headphones return twin channel acoustic amplifier 5 7 tuner 4 footswitch tip = int. efx ring = ext. efx on/off power on 6 DI-out 1 = gnd 2 = pos 3 = neg 8 C AU T I O N RISK OF ELECTRIC SHOCK DO NOT OPEN AT T E N T I O N RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR Made in Germany by B IB_Compact603_20120529 3.2 Rear side 1) line out The line out supplies a pre-amp signal taken after tone-control, effects and master for forwarding to other appliances.
4. Starting up short flicker can be accepted, to be on the safe side you should reduce the gain slightly to achieve an optimal and distortion-free performance. 4.1 Cabling and switching on Before connecting to mains, please ensure that your local mains voltage is suitable for the voltage of the device (e.g. 120V in the USA, 230V in Europe). The relevant specs and safety symbols are printed on the rear side of the unit. Connect all cables according to your application and switch the amplifier on.
5.2 Effects 5.4 Phantom power The Compact 603 has a built-in (internal) digital effect processor, with the select-switch you can choose between 4 different effects: Microphones requiring 48V phantom power can be connected to the XLR-socket of channel 2 directly. Factory-provided phantom power is activated but, if required, may be deactivated by an internal jumper.
Technical data specifications Compact603 6. Technical Effect is OFF when the footswitch is ON. Inputs (notes 1, 2, 4) channel 1 channel 2 High impedance, unbalanced input for instruments (pick-ups) and line-level sources Mono jack socket, ¼” (6.35 mm) Sensitivity: 22 mV (–33 dBV) High/low (attenuator) switch: –10 dB Impedance: 2.2 Meg Equivalent input noise, A-weighted: 1 uV (–120 dBV) Phantom power (optional): 9 V DC / max.
CH 2 CH 1 R R T T 2 10 3 Compact 603 - 121129_GB 6k8 www.aer-amps.com 6k8 +48V 48V Phantom Power MIC GAIN H/L MIC PREAMP VOICE MIC OFF/ON COLOUR LINE PREAMP GAIN LINE PAD +9V 9V Phantom Power MIDDLE GAIN CLIP Clip detect BASS CLIP Clip detect BASS TREBLE TREBLE EFFECT PAN MASTER FX SELECT SUBSONIC EFF. RETURN LIMITER POWER AMP 470R R R 1 2 PHONES LINE OUT RETURN F/S SEND TUNER DI B090216C_20110401 DUAL CONE SPEAKER T T 3 7.
notes 11
www.aer-amps.