BThe Acoustic People Manual amp two English
bottom line amp two Operating Manual Contents: 1. Introduction 2. Safety precautions 3. Concept 4. Controls 5. Operation summary 6. Technical specifications 7. Disposal regulations 1. Introduction Welcome to AER. It took us quite some time – so we are all the more happy that you have opted for the amp two. You have chosen a professional, compact and powerful amplifier which was designed especially for handling electric basses.
2. Safety precautions Please read and check if you have understood all instructions in this manual. down on dynamics, since the power amplifer, power supply or components hit their performance limit too early. Always take some basic safety precautions when using your amp two in order to minimize the risk of injury through fire or electric shock.
. Controls Left to right: input Instrument input (mono jack) middle Midrange control high / low Sensitivity selector switch high: high sensitivity low: low sensitivity freq.
Rear panel Left to right line out pre/post master Switches the line output pre or post master volume control headphones Caution! Use only stereo headphones.
. Technical specifications Single-channel amplifier for electric basses Inputs (notes 1, 4) input High-impedance instrument input Mono jack, ¼” (6.35 mm) Sensitivity: 22 mV (-33 dBV) Impedance: 1 Megohm Equivalent input noise: 2 µV (–114 dBV), A-weighted high / low switch: 10 dB attenuation aux in Stereo jack, ¼ “ (6.35 mm) L + R mixed and added pre master, but post tone controls. Level control.
. Disposal Regulations The disposal of electronic equipment in household waste is not permitted. AER GmbH waste electrical and electronic equipment is not to be taken to public collection points for disposal. European Union, Norway, Iceland and Liechtenstein AER GmbH remains solely responsible for the disposal of AER GmbH waste electrical and electronic equipment labelled with a dustbin. The disposal of electronic equipment in household waste is not permitted.
B The Acoustic People www.aer-amps.