Installation Guide

MANUAL

Hardware List

Parts List

Three positions allow you to select the best height for your TV set on the stand. Use the appropriate hooked

opening on the vertical bar (7) to determine TV height. Using the top hooked opening on vertical bar (7) will set the

TV lower on the stand, while the bottom hooked opening will set the TV higher on the stand. Attach one of the

three hooked opening to the upper cross bar of the TV stand.

Select Height for Your TV Set

The adjustable height feature of

this stand has three dierent

options for your TV (part 7).

Part 11 allows you to easily level / increase the height of this stand by unthreading the caps in the base of each leg.

Please note the maximum recommended adjustment is ¾” or 19mm only. Do not loosen or adjust beyond ¾” or 19mm.

In doing so may compromise the stability of this stand and could result in damage to this product, or those in proximity.

Swiveling TV Stand

with Riser

PAGE 1
MANUAL Select Height for Your TV Set Three positions allow you to select the best height for your TV set on the stand. Use the appropriate hooked opening on the vertical bar (7) to determine TV height. Using the top hooked opening on vertical bar (7) will set the TV lower on the stand, while the bottom hooked opening will set the TV higher on the stand. Attach one of the three hooked opening to the upper cross bar of the TV stand.
PAGE 2
Assemble TV Shelf Installation Instructions Note: Two people may be required for assembly. Please lay parts flat on floor to assemble. A). Align parts on the floor per diagram (3). Insert two threaded rods into and through parts shown in the diagram (3). 4 B). Tighten both socketed cap screws (A) at the bottom of the assembly with provided Allen wrench (R) while simultaneously tightening both nuts (E) at the top of assembly with the provided wrench (O).