MIP-300 WiFi Phone User’s Manual v1.
Preface Regulatory Information FCC Regulation This model phone complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF exposure regulation (SAR) This model phone meets the government's requirements for exposure to radio waves. This phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines.
Overview This Wi-Fi phone enables you to make VoIP phone calls through IEEE 802.11 b/g/n wireless network. Read this user manual carefully to learn how to operate this product and take advantage of its features.
Product Description 1 2 13 16 3 15 14 4 5 6 7 12 11 8 9 10 No. Item 1. Receiver 2. Charge Status 3. LED Display 4.
No. Item Description 5. Right Soft Key • Display the Phone Book • Clear inputs / cancel or Mute during a call 6. Power/Red Key • Power on or power off • End conversation; exit (back) 7. Numeric Key 8. Pound Key 9. USB Jack • Connect mini USB / charger jack 10. Charging Pad • Contact to the charging cradle 11. Microphone 12. 13. Star Key Speaker Enter numbers and text • Change text output in text mode. For example: AB, ab, 12, Ab.
Getting Started Inserting the Battery To insert the battery into your phone, perform the following steps: 1. Slide off the battery compartment cover. 2. Insert the battery as shown, making sure the gold connectors are correctly aligned. 3. Replace the battery compartment cover until it clicks into place.
Charging Your Phone Use AC power adapter to charge your phone. 1. Connect one end of the AC power adapter cable to the port at the rear of the cradle. 2. Plug the AC power adapter into your mains socket. 3. Place your phone in the cradle and charging begins. We recommend that you charge the battery for three hours before using your phone for the first time. Turning Your Phone On and Off Press and hold the Power/end key ( ) for two seconds to turn it on.
Navigating Phone Menus The LCD Screen See below for an overview of the layout of the LCD screen and its icons: 3 4 5 2 1 Peer2Peer Ready 7 16:17 9 Menu 6 19-Nov-07 7 Name 8 The LCD screen elements are described in the table below: No. Indicator Description 1. WiFi signal Displays the WiFi signal strength. The presence of five bars ( ) indicates the strongest signal and the presence of a single bar indicates the weak- est signal. 2. Key Lock Mode Displays the keypad locking status. 3.
The Menu Screen From the main screen, press the Left soft key ( ) to enter the menu screen. Follow these tips to navigate through the menu and menu options. • Use the Navigation Pad ( ) to move around the screen. • The lower bar of the screen displays Select for you to enter the menu item currently selected. • To go back one level in a menu, press the Power/end key Use the Navigation Pad ( ). )to select the submenu items and options. For example, to view missed calls, following the steps below: 1.
Menu Submenu Options Language English as the default language (with as many as six languages) Tone Ring Settings Volume Set Time Time Format Time/Date Phone Settings Set Date Date Format Profile Settings New Profile Keypad Tone Range Warning Audio Settings Battery Low Handset name Display Settings Backlight Duration AP Settings Default Master Reset Reset All Settings Firmware Upgrade Upgrade Firmware Select AP Select Network AP Find Select Network Select Profile Peer to Peer or pr
Settings the Display Language To set the MIP-300 display language, perform the following steps: 1. Press the Left soft key ( ) to display the main menu. 2. Using the Navigation Pad ( ) to scroll and the Left soft key ( items, go to Phone Settings€ Language. ) to select 3. Select a required language from the provided six languages (English as the default). 4. Press the Left soft key ( ). The display language changes to the selected format.
Installation The MIP-300 is suitable for home and office use and the setup procedure is similar, with the addition of Session Initiation Protocol (SIP) for office deployment. The two setup models are outlined below. Typical Home Setup The diagram shows a typical home setup using a local area network (LAN). With the addition of IP PBX connects to a wireless IP or wireless phone. It provides not just Data IP network, but also provides Voice IP network.
Basic Setup Basic connection setup between the MIP-300 and Access Point (AP) must be performed for both deployment models described. To setup the MIP-300, perform the following steps: 1. Ensure that the battery is correctly inserted and fully charged before continuing. See “Inserting the Battery” on page 4 and “Charging Your Phone” on page 5. 2. Ensure that the time and date settings are correct. See “Setting the Time and Date” on page 10. 3. Press the Left soft key ( ) to display the main menu. 4.
Phone Settings From the main screen, press the Left soft key ( ) to enter the menu screen. Follow these tips to navigate through the menu and menu options: • Use the Navigation Pad ( ) to move around the screen. • The lower bar of the screen displays Select for you to enter the menu item currently selected using the Left soft key ( ). • To go back one level in a menu, press the Power/end key • Use the Navigation Pad ( ). ) to select the submenu items and options.
Editing Contacts To edit an existing Phonebook contact, perform the following steps: 1. Press the Right soft key ( 2. Press the Left soft key ( ) to display the Phonebook screen. ) to enter the Options submenu. 3. Using the Navigation Pad ( items, go to Edit. ) to scroll and the Left soft key ( 4. Using the Navigation Pad ( any necessary changes. ) scroll to either name, SIP, No., or IP and make 5. Press the Left soft key ( ) to select ) to save the modifications.
To access a Call log, perform the following steps: From the main screen, press right on the Navigation Pad ( OR 1. Press the Left soft key ( ), ) to display the main menu. 2. Using the Navigation Pad ( items, go to Call Log. ) to scroll and the Left soft key ( ) to select 3. Using the Navigation Pad ( ) to scroll and the Left soft key ( items, go to Received, Missed, or Dialed Calls. ) to select 4. Using the Navigation Pad ( ) to scroll and the Left soft key ( items, go to the desired entry.
Ringer Volume To set the ringer volume, perform the following steps: 1. Press the Left soft key ( ) to display the main menu. 2. Using the Navigation Pad ( ) to scroll and the Left soft key ( items, go to Phone Settings€ Ringer Settings. ) to select 3. Using the Navigation Pad ( items, go to Volume. ) to scroll and the Left soft key ( ) to select 4. Using the Navigation Pad ( on the sliding scale. ) select the required volume from 0 through 4 5. Press the Left soft key ( ) to save changes.
• Set Active—activate the profile you selected. 5. Press the Left soft key ( ) to save the new profile settings. For more information on SIP, Domain, Out Proxy, and STUN see the AP User Manual. Editing Existing Profiles To edit an existing profile, perform the following steps: 1. Press the Left soft key ( ) to display the main menu. 2. Using the Navigation Pad ( ) to scroll and the Left soft key ( items, go to Phone Settings€ Profile Settings. ) to select 3.
Display Settings You can set the display name and backlight duration time (in seconds) that the backlight remains on while the keypad is inactive using the Display Settings menu. Setting the Display Name To set the display name, perform the following steps: 1. Press the Left soft key ( ) to display the main menu. 2. Using the Navigation Pad ( ) to scroll and the Left soft key ( items, go to Phone Settings€ Display Settings. ) to select 3. Using the Navigation Pad ( items, go to Display Name.
3. Using the Navigation Pad ( ) to scroll, press the Left soft key ( ) to set the selected AP as the default, and press the Right soft key ( ) to modify AP settings. The AP Settings screen displays the following options: • IP Settings—select DHCP or configure Static settings including IP Address, Subnet Mask, Gateway Address, and DNS Address. • Security Settings—enter the Security protocol. The key options are WPA Passphrase, WPA Key, WEP64 Key, WEP64 Passphrase, WEPl28 Key, and WEP128 Passphrase.
To upgrade your firmware, perform the following steps: Note: Ensure that the battery is fully charged before starting the upgrade procedure. 1. Press the Left soft key ( ) to display the main menu. 2. Using the Navigation Pad ( ) to scroll and the Left soft key ( items, go to Phone Settings€ Firmware Upgrade. ) to select 3. Using a USB to mini-USB cable, connect the MIP-300 to a computer with a presaved firmware file or internet access. 4.
6. Click Finish to exit the wizard when the window displays information about finishing installing the software for DFU (Device Firmware Upgrade) mode. 7. Locate and execute the DFU executable file ( ). A Device Firmware Upgrade window will show up. 8. Locate the DFU file and click Download to upgrade firmware. 9. Detach the USB to mini-USB cable and click Close to exit the window when the window displays Reset complete, please detach device from USB. 10. Turn on the phone again.
2. Using the Navigation Pad ( items, go to Select AP. ) to scroll and the Left soft key ( ) to select 3. Using the Navigation Pad ( ) to scroll and the Left soft key ( items, choose the AP you want to connect to from the list. 4. Press the Left soft key ( ) to connect to the selected AP. ) to select A list of local APs displays. Scanning for APs You can scan the local area for WiFi reception. If reception is good, you can set the AP as default or connect through the Select AP menu.
3. Using the Navigation Pad ( ) to scroll and the Left soft key ( items, choose the desired profile. ) to select Information If the phone is connected to an AP, you can display IP, AP, SIP, Firmware version and MAC address information using this submenu. To display the information page, perform the following steps: 1. Press the Left soft key ( ) to display the main menu. 2. Using the Navigation Pad ( items, go to Information.
Making Calls Dialing Contacts Your MIP-300 WiFi Phone incorporates a Phonebook with a capacity of 50 entries for ease of use. Add, edit, and remove contacts using the Phonebook menu or dial directly from the Phonebook using the Dial Contacts feature. To dial a contact using the Phonebook, perform the following steps: 1. From the main screen, press the Right soft key ( Phonebook, ) to display the OR Press the Left soft key ( ) to display the main menu.
Dialing Regular Numbers To dial a regular number manually, perform the following steps: 1. From the main screen, press the Call key ( 2. Using the Navigation Pad ( 3. Press the Left soft key ( ). ) to scroll to No. ) and enter the desired number using the keypad. Note: Remember to include the national and international prefixes. 4. Press the Call key ( ) to dial the selected number. Dialing IP Numbers To dial an IP address manually, perform the following steps: 1.