Self-Contained Access Control Reader AR-2808 User Manual AEI PROTECT-ON SYSTEMS LIMITED www.apo-hk.
TABLE OF CONTENTS INTRODUCTION ...................................................................................................................... 3 SPECIFICATIONS ................................................................................................................... 3 Package Contents ................................................................................................................ 3 THE FRONT PANEL ...............................................................................
Multi- Station Access Control Electric Lock INTRODUCTION Description The AR-2808 is expandable to a multi-station system for user convenience with the auxiliary reader AR-2802. Maximum 3 AR-2802 can be connected in parallel with the Data I/O Bus of the AR-2808. The auxiliary reader(s) reads the Cards as like the master reader AR-2808 which is the server of the system to manage the data from the auxiliary reader(s).
THE FRONT PANEL APPLICATION EXPANSION – The Optional Auxiliary Reader AR-2802 Apart from standard-alone operation, AR-2808 is expandable to be a Multi-station System with the optional auxiliary reader AR-2802. Maximum three optional readers can be allowed and the connection is very simple. Just connect the devices in parallel with the Data I/O Bus of the AR-2808. The AR-2808 acts as a server of the system and manages the data among them.
APPLICATION EXAMPLES INSTALLATION 1) Stand Alone Access Control Electric Lock AR-2808 ASSEMBLY AR-2808 1 2 3 (+) (–) 12VDC 4 (+) (–) DOOR LOCK 5 EG IN 6 7 8 DATA DOOR BELL I/O N.O. 9 10 TAMPER N.C. (+) AP-960 AD-2312 AD-2322 12 VDC POWER SUPPLY N.O. (–) * See Door Lock Selection Jumper (+) 1.SAFE -- For Fail-Safe Electric Lock 2.SECURE -- For Fail-Secure Electric Lock ELECTRIC LOCK N.O.
Important Two types of electric locks are available on the market. It is necessary to confirm that the lock is Fail-safe or Fail-secure in order to make the correct jumper selection. Wrong selection may cause damage to the lock or the reader. ● Fail-safe Electric Lock – Normally energized; power ON to lock, power OFF to unlock ● Fail-secure Electric Lock – Normally de-energized; power ON to unlock, power OFF to lock Door Lock Selection Jumper 1. SAFE (For Fail-safe Electric Lock) 2.
LED 2 - ON LED 1, 2 & 3 Flashing Auto-Confirm 18 LED 3 - ON LED 1 & 2 Flashing Feature Group 3 Selected Auto-Confirm Read Master Card 4 TIMES Status LED ON ► Flashing LED 4 - ON LED 1, 2 & 3 Flashing Feature Group 4 Selected Auto-Confirm IV) SET SYSTEM SAFETY LOCK-UP Read Master Card 3 TIMES Status LED ON ► Flashing All 5 LEDs Flashing LED 1 - ON Feature Group 2 Selected Auto-Confirm Feature Group 1 Selected III) SET OUTPUT MODE FOR DOOR LOCK Read Master Card 2 TIMES Status LED ON ► Flashing
CREATE A MASTER CARD (CMC) The First Step before Programming- Make A Master Card ● The system needs a Master Card to set it into programming mode. Before programming, it is iiIInecessary to make a Master Card by the owner. ● In case the Master Card is lost, it is necessary to make a new Master Card to replace it. Once a iiIInew Master Card is made, the old one is invalid.
B) Delete Super User Card(s) – Option 2 PROGRAMMING In case a Super Card is lost, it can be deleted from the system. 1) Criteria for Setting System to Programming Mode Read Master Card 5 Times Set System in Feature Group 5 Select Option 2 -- Delete Select Location 1-5 Card Deletion Execution Exit Programming Mode 1 2 3 4 5 2) Press BELL button to select Option 2 -- Delete ....Response : LED 2 is ON. After 2 seconds, the system confirms the selection with 2 beeps and .........................
I ) RECORD USER CARDS – Feature Group 1 V ) CREATE / DELETE SUPER USER CARDS -- Feature Group 5 There are 5 Storage Groups available for storing total 500 User Cards. For easy management, each group accommodates 100 user cards maximum. The indicator LED of the storage group is ON for vacancy available and flashing for vacancy full. This system is designed for small office or home that does not have large number of users. It is suggested to put user cards evenly into the 5 Storage Groups.
IV ) SET SYSTEM SAFETY LOCK-UP -- Feature Group 4 II ) DELETE USER CARD(S) – Feature Group 2 The reader can be protected with safety lock-up to prevent trials with un-recorded cards. There are three options for owner’s selection. Only one option can be selected in programming. The User Card(s) can be removed from the system if it is not used or lost. Three deletion modes are available.
III ) SET OUTPUT MODE FOR DOOR LOCK -- Feature Group 3 4) Read Master Card 1 Time to close Programming Mode. IIIIResponse : 2 Beeps confirm reader back to normal operation. IIIINote: IIIIThere is a slot left at the memory stack after a card is deleted. In programming, the new cards will IIIIfill in the slots first according to their position in the queue of the memory stack. After all the slots IIIIare filled, then the cards will go to the vacancies available at the end of the list.