Please read and keep your operating instructions Thai information in this booklet will help you to get the best farm your very efficient Lava therm tumble dryer. Do not talc out a service engineer for any user reflated information contained in the booklet ~ such & call is nat free of charge.
Your Lava therm Front Fig. Worktop (removable} Fig. 14Z) Filterer Fig. 1/8) Cover to fluff filter (it up} Fig. Rating plate {E-No. and F-No.) Fig. 145) Programmer chart Fig. 148) Air vent Fig. Acceptableness exchangeable ‘Sidearm Fig. Electrical lead Control panel Fig. 4/8) Programmer selector Fig. 4/ Electronic programmer stags indicator Fig. 445 “Empty condensed-water container” indicator Fig. 442 “Clean filterer” indicator Fig. 4/8) Acoustic “programmer end” signal Fig.
Electrical connection Please motel {For users in the UK) Warning! Alt appliances with a 3 core lead must be earthed Please ensure that the voltage and current indicated on the rating plate agrees with the voltage of your electricity supply. 220/240 volts — 2207240V AC) Your appliance has been equipped with a mains iPad with a molded-on type plug. You must amply with the following regulations: The plug molded on to the cord incorporates & fuss, For replacement, use a 13 amp BS 1362 fuse.
Do’s and don’ts to get the best results dry aliens or wool mixtures in a turntable dryer {Fisk of feting) dry articles which carry the symbol on the care bale, they are not suitable for machine drying dry laundry which has not been spun in a washing machine. check the cave labials on the clothes if they are suitable for tumble drying.
How to use your Lava therm Operating and indicator selector Programmer selector Fig. The programming selector Controls 3 functions: 3) To switch the appliance on and off, indicated by the on/off of the pilot fight. b} To choose the drying programmer required (see programmer char page 11) programmer selector must be turned clockwise only. <} To switch the light in the drunk on and off. Door release button Fig. 4/(5 Press this button to open the loading door. Start button Fig.
How to use your Lava therm Electronic programmer stage indicator Fig. 410 The dryer features an electronic programmer This visual contra offers you the advantage of stage indicator for programmed the removing individual articles at different degrees laundry reaches a certain degree of dryness ot dampness for raring. If none of the indicators e relevant symbol fights up. At the end of arm on the machine has not yet reached any of the the crying programmer the programmer end stages. symbolic also lights up.
How to use your Lava therm Cleaning the fluff filter Fluff which adheres to the laundry during fine The fluff fitter is located on the inside of the coaling drying is removed from the clothes during treble door. Lift up the filer id {see Fig. 263)) and drying and collects in the fluff fighter. remove the fluff from the fitter, The huff filter has to be cleaned after each drying programmer. Emptying the condensed-water container Empty the condensed-water container (Fig. tater each drying programmer.
Machine transport and maintenance The heat exchange should be cleared after approximately 100 drying programmed {approximately every & months), To clean the heat exchange remove it from the machine as fallows; 1. Open access flap to heat exchange (fig 1/} by turning the lever on the flap to the Left ~ Hap springs open. 2. Unlock heat exchange by turning the two looking discs (fig. 413} a quarter tum in tha direction of the arrows. 3.
tf you think your machine is not working properly ..if the appliance is not working: Have you pressed the start button? Have you selected a programmer? Have you closed the loading door? Has the plug been inserted imo the socket? W s the fuse in working order? » Has the condensed-water container been emptied and inserted correctly? W Haste overflow protector been activated (see gaps 1257 . .
Optional extras The following items can be obtained as optional extras through your AEG stockist. ® Stacking kit (washing machine and tumble dryer) To stack the dryer on a current AEG washing machine you require stacking kit TRZ 953 ~ E-No. 607899953 To stack the dryer on an older 5 kg AEG washing making you require stacking kit: TRZS10 ENo. 607839910 as well as the one above W The dryer can be adapted to drain the condensed water into an existing drain, sink, stc.
How to save energy The LAVA THERM 740 MICROCOMPUTER s & very economical drys even more 50 when you follow the hints below: W Spin the laundry in a washing machine with high water extraction {e. g., at least 800 rpm. B The room in which the dryer is sited should be well ventilated and the temperature should not exposed 36° C during drying to ensure economical drying, W The dryer works most economically with the road sizes as recommended on page 11. The following chart may help you in assembling the loads.