Dear customer, Please read these operating instructions through carefully, before using the appliance. Please ensure you fully understand the safety instructions on the first pages of these operating instructions! Retain this instruction book for future reference, and pass on to any future owners. The warning triangle and/or the key words (Warning!, Caution!, Important!), emphasize information which is important for your safety or the correct functioning of the appliance.
Contents important Safety Information General Safety .. s 5 Child Safety 6 For the installer Safety information 7 Technical data 8 Electrical Connection Site Preparation EVENING General Information 15 Disposal Packaging Tumble Dryer 15 Environmental protection tips .. 16 Description of the appliance .. Front view Control panel . Program S Elector .. i i i Before using the appliance for the first time 20 Brief operating instructions Drying Prepare the laundry .
Contents Programmables small glossary of textile information .. .27 Care symbols .27 Cleaning and maintenance 28 Cleaning the filter area 28 Cleaning the drum .28 Cleaning the panel and operating parts .. 28 Somethingnotworking? .. ...l 29 Door Reversal Instructions 3 Special accessories .33 Stacking kit .33 Guarantee Conditions 34 Service B Spare Parks Id Ex ..
Important Safety Information /\\Important Safety Information Your safety is of paramount importance, please ensure you read these warnings before installing or using the appliance. |f you are unsure about any of the meanings of these warnings, contact the Customer Care Department.
important Safety Information * Do not use the mains cabin to pull the plug out of the socket. » Repairs to the appliance should only be carried out by qualified personnel. Repairs carried out by inexperienced persons may cause injury or serious malfunction. Contact your local AEG Service Force Center for repair. * Washing that is in poor condition (heavily worn) and items with loose fillings {cushions) that could break open must not be dried.
For the installer Safety information For the installer Safety information * Check the appliance for transportation damage before installation. # Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. This tumble dryer is designed to be vented through to the open air. It should have its own ventilation system which should not be joined with any other ventilation system connected to any other appliance.
Technical data Technical data Height x Width x Depth 85xB0x60cm Depth with the door pane 117¢m Height adjustable from Empty weight approx, 40kg Load {depending on the program) max. 5kg Power consumption in ace. with IEC 1121 5.e. 3.
Electrical Connection Electrical Connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. WARNING ~ THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any ability should these safety measures not be observed, Before switching on, make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. The rating plate is located inside the door.
Electrical Connection The wire colored green and yellow must be connected to the terminal marked with the letter “E” or by the earth symbol €5 or colored green and yellow * The wire colored blue must be connected to the terminal "N” o colored black. * The wire colored brown must be connected to the terminal marked “L* or colored red. * Upon completion there must not be cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath.
Site Preparation Site Preparation # The installation surface must be clean and dry. » Do not install on a deep pile carpet. |f the appliance is installed next to a heat source {e. g. cooking appliance), a heat insulation pad must be placed between the washing machine and the heat source. * Do not install the appliance where the temperature may fall below freezing of rise above 35°C.
Venting Venting from the tumble dryer vent. Tumble Dryer Vents 5 10 View from left View from right through to the outside.
Venting Venting through a Vent Hose The vent hose expelling the hot air should be 100 mm diameter and no longer than 4 meters. Avoid bends in the vent hose as this will reduce the air flow. The maximum length of the vent hose may be: 4 meters with 0 bends, or 2 meters with 2 bends. If the vent hose is to be permanently installed to the outside, a wall box or suitable cover should be used on the outside wall.
Venting Venting without a Vent Hose If a vent hose is not connected to the tumble dryer, the air can be expelled into the installation room providing the following precautions are observed. ® The vent(s) in use must be at least 30 em from the wall or any other object. * Any vent less than 30 cm from a wall or other object must be closed using the cover provided. * The installation room must be well ventilated during the drying cycle.
General Information (1 General Information * To prevent creasing do not exceed the maximum load stated in the program table, ® When using fabric conditioning sheets, we recommend the conditioning sheet is pinned {using a safety pin) to an article of laundry and placed in the tumble dryer. * When using fabric conditioning sheets or drying starched washing in the tumble dryer, it is important to clean the drum to prevent a build up of any residues/deposits. See maintenance and cleaning section.
Environmental protection tips 16 (2 Environmental protection tips » Your laundry will become light and soft in the tumble dryer even without a fabric softening agent. * Loosen your laundry before loading it into the dryer. This helps to prevent lengthy running times and creasing. Ensure your laundry is well spun. In the following table we give an overview of specific electric consumption data depending on the spinning speed.
Environmental protection tips * Observe the maximum load instructions. Whenever possible, dry full loads. » Select the appropriate drying program for the type and quantity of laundry. The dryer will then operate as economically as possible. Some typical consumption values: 1} Spun with BOO revolutions per minute 2) Pres pun with 1000 revolutions per minute * Only use the § SPECIAL CARE button for loads up to 2.5kg.
Description of the appliance Description of the appliance Front view Control pane Fluff filter Rating plate -~ Feet Removable Plinth Reversible door {all height-adjustable) 18
Description of the appliance Program selector: To select the drying time required B SPECIAL CARE button S: For delicate fabrics € START button <: For starting the drying program D OPERATING light: illuminates when the appliance is switched on Control panel 19
Before using the appliance for the first time Program selector * 150MIN MINIM: for setting the drying time required in minutes. » AIRING Program J\: for smoothing out erased outer garments in a cold air flow; slightly dampen the creased areas first; program duration: 10 minutes. * OFF: The tumble dryer is switched off. Program selector as progress indicator The program selector serves as a progress indicator by moving clockwise until the end of the program is reached.
Brief operating instructions Brief operating instructions * Ensure the (sundry is well spun before tumble drying. ® Prepare the laundry. * Load the laundry. # Select the drying program using the program selector, Press the § SPECIAL CARE button if required. * Start the program. While the program is running you can open the door to remove or add foundry. At the end of the program: * Remove the laundry. * Clean the fluff filter, * Switch-off the dryer.
Drying Drying Prepare the laundry * To prevent tangled bundles of laundry: Close zip fasteners; button-up bed linen and pillow cases; tie-together loose tapes, e.g. aprons. * Empty all pockets. » Remove all metal objects (paper clips, pins, etc). * Turn clothing consisting of double-layer fabric inside out (such as cotton-lined anoraks with the cotton layer facing outwards). The fabrics will dry better, ® Loosen the laundry.
Drying * SPECIAL CARE button This program operates with reduced heat. Press the SPECIAL CARE button for fabrics bearing the care symbol £J. Gentle drying is advisable for heat-sensitive fabrics {such as acrylic and viscose).
Drying Removing laundry or loading laundry when necessary You can interrupt the drying process at any time to remove some of the Laundry or to add more laundry, 3 Open the door. Caution! The laundry and the drum may be hot. ¥ Remove or add more laundry. &5 Close the door. U Press the START button to resume the drying process. End of the drying process The cooling phase starts shortly before the end of the drying process: The heater is switched-off during this phase.
Drying Clean the fluff filter To ensure efficient operation of the tumble dryer, clean the fluff filter after each drying program. Also check whether there are any remnants or fluff from the washing in the drum; remove immediately. IEF Press the catch of the filter lid downwards, The filter lid will open. BE" Take-out the fluff filter. BF Remove fluff out of the fluff filter, with a moistened hand. g Re-insert the fluff filter, 85" Press against the filter lid until it catches into the locking device.
Program tables 28 Program tables When spun at 1000 revolutions per minute When spun with 1200 revolutions per minute i AIRING programmer A&
A small glossary of textile information A small glossary of textile information Care symbols Ensure articles to be dried are suitable for tumble drying, If they are one of the following symbols should be present on the care label: G This fabric can be tumble dried, The fabric manufacturer does not stipulate if the piece of laundry should be dried on a normal or gentle program.
Cleaning and maintenance Cleaning and maintenance Cleaning the filter area & Important A small amount of fluff may reach the area around the fluff filter. Therefore, you should clean the entire filter area from time to time, or at least every three months. Remove the fluff filter. Hold the filter Tid by the top and pull it for== wards until it is released from both holders. / Remove the fluff from the entire filter area ~ preferably with a vacuum cleaner.
Something not working? Something not working? if the tumble dryer is not working correctly please carry out the following checks before calling an engineer.
Something not working? If after these checks, the tumble dryer still does not work, contact your Local AEG Service Force Center, Please note that it will be necessary to provide proof of purchase for any in-guarantee service calls. In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.
Door Reversal instructions Door Reversal Instructions The door opening direction can be changed if required. Z\ Warning! Before reversing the door, isolate the appliance from the mains supply. Proceed as follows to reverse the dewy opening direction: ACB T 6 Remove the screws A on the front panel of the appliance. TF Take off the door by sliding the door towards the center of the machine, disengaging the hinges from the front panel. EF Remove the screws B on the inside of the door and take off the hinges C.
Door Reversal Instructions Reposition hinges C and door catch D on the opposite side of the door and replace screws. To release the door lock H remove the fixing screw and slide the lock upwards. To disconnect the wiring plug press the two plastic securing levers on the plug and pull out. Cover plate J is removed above. Disconnect the wiring plug by pressing the two plastic securing levers on the plug and pull out.
Special accessories Special accessories You can obtain the following special accessories from your retailer. Stacking kit With these kits you can combine your laundry dryer with any LAVA MAT automatic washing machine to a washing and drying column. The appliances are stacked in space-economizing manner in this arrangement, the washing machine at the bottom and the laundry dryer at the top. The following two kits are available: without plate E-No. 916018900 with extensible deposit plate E-No.
Guarantee Conditions 34 Guarantee Conditions AEG offer the following guarantee to the first purchaser of this appliance. 1 The guarantee is valid for 12 months commencing when the appliance is handed over to the first retail purchaser, which must be verified by purchase invoice or similar documentation. The guarantee does not cover commercial use. . The guarantee covers all parts or components which fail due to faulty workmanship or faulty materials.
Guarantee Conditions European Guarantee If you should move to another country within Europe then your guarantee moves with you to your new home subject to the following qualifications: The guarantee starts from the date you first purchased your product. ~ The guarantee is for the same period and to the same extent for marabou and parts as exist in the new country of use for this brand or range of products. This guarantee relates to you and connote be transferred to another user.
Servile & Spare Parts 36 Service & Spare Parts if after carrying out the necessary checks there is still a fault with your appliance please contact your local AEG Service Force Center. In guarantee customers should ensure that the suggested checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown. Please note that proof of purchase is required for in-guarantee service calls.
Index A S Lacerate . Safety information .. Acrylic .. Service & Spare Parts . AEG Service Force Center SPECIAL CARE | Anorak . Stacking kit . ¢ START bitten . Closing the doodad vieieiienn. s T Conditioning sheets . Connection .. Control panel . 001 AR Cool-down phase . Crease protection phase .. Customer care D Disposal . Door Reversal E Easy-care fabrics Environmental protection . F Filterer 25 Lumiere POROSITY ..o vane e 28 G Glossary Guarantee ..