4 Hello Ali ow me to introduce myself: { am your AEG LAVA THERM tumble dryer. From now on, | should fiche 1o make tumble-drying easier for you, and not simply because of my attractive appearance, but also thanks to my “intrinsic qualities”.
Contents Safety instructions Before first use Therefor You should lase note the following Out of concern for the environment ..
Before first uSe e Safety instructions for the user 26 Safety instructions | must be installed level. My four adjustable fest can be used to compensate for uneven floor conditions. Please use a screwdriver to adjust my adjustable fast. Place the screwdriver in the vertical slots visible from the frostbit. ~ My drum should be wiped with a damp cloth.
2750 GRUE any other maintenance needs to be carried out, you are also basically recommended to contact our service center or a repair shop authorized by ourselves, Only original AEG spare parts fulfill all requirements! if tam installed under a worktop in your kitchen or utility room, an earthed intermediate panel must be provided as access protection according to the installation snd connection instructions " when the warrior has Dee removed Do not sit on or lean against my open door.
28 | ' Articles containing foam rubber or similar materials must also not be machine-dried. The dryer may catch fire. Fabrics ordaining residues of hair spray, nail varnish remover, hair setting lotion, or similar agents should not be machine-dried owing to the danger of gas formation. if SA-called “conditioners” are machine-dried regardless of the respective properties of these conditioners — coating of the fluff fighter sufficient to cause choking cannot be excluded.
T 20 GEL Out of concern for the environment All tremble dryers require energy for drying. | am especially economical to run if you take note of the following hints: M Thoroughly spin-dry your laundry first! Lam especially energy-saving to runic your laundry is wall spin dried before tumble-drying (. e.
Woolens and downs Care symbols Gentle programmer/ S-bitten Creasing Knitwear Starched foundry 30 Important recommendations on drying Never dry wool or wool mixtures {felting risk).
PENELOPE 120 OB U Spin-dry your laundry well before tumble-drying {at least at 800 Higher spin speeds relics power consumption during frying and make it more economical. Easy-care Tactics should be briefly spun before they are loaded in my drum, Close zip-fasteners and tie together loose strings (e. g. of aprons). You will thereby avoid tangling of your laundry. Clothes made of double-layered fabrics (poly amide outer layer, cotton inner layer, 8. g. anoraks) should be muted inside out before drying.
& % 2N 2/15 A Detachable worktop B Machine door, opened via door release button {only when machine is connected) or door trip € height-adjustable screw-in feet {front and rear) Features 33
Sorting your foundry Take care when handling ‘some fabrics Before drying When the programmer has ended 34 Before drying Sort your laundry according to Cottons and linen ~ Easy-care laundry — Dark-colored laundrywoman ~ Light-colored laundry/fabrics Make sure that your laundry is stable for machine-drying Newer dry wool or wool mixtures or knitwear made of or containing wool felting rig) Empty pockets. Turnover metal objects (e. g.
Loading your laundry You have two ways of opening my loading door: 1. Press the door release button X To pane my door in this way, you must connect me to the mains supply. That means, you must place the power plug in the plug socket and turn my programmer selector switch from the © position. Arthritis case, my operating indicator lights up. 2. Door trip function If you have not connected me to the mains supply §i. e.
Programmer selector switch The button functions 36 Selecting the drying programmer You gan turn Iy programmer selector switch clockwise from any position. it has three functions: Using the programs selector switch, you switch me on and off, Depending on the operational status, my operating indicator then Comes on or fess cut. Via the programmer selector switch, you select your drying programmer. Instructions on programmer selection are given in the program ma table (“programmer tables” section).
enable this button to fulfill ks function, you must connect me to the mains supply and turn my programmer selector switch from the 0 position. The operating indicator then lights up, and my door springs open when the door release button is pressed. Islam not connected to the mains supply, my door will spring open if you apply sight pressure at the center on the LH side of my door (if the door has beseeching tithe BH side, you must press the center.
Switching off the machine 40 Cooling phase and anti-crease sequence Shortly before the programmer end, my heating system is switched off to cool your laundry. Unless you immediately remove your laundry from my drum when the drying sequence has ended, the 30~ minute anti-crease programmer automatically follows. During this sequence the alternately reversing tumbling action of the drum continuously loosens the laundry so that & remains fluffy and crease-free until taken cut.
88U G 222 (25 Cleaning the lint strainer Abraded fabric, some 70% of which occurs during everyday war, 20% during washing, and only 10% during drying {source: Hautbaratungsstelie fir Blektrizititsanwendung eV, (YEAH, Frankfurt), is abraded in the form fo fluff ing) which collects in the lint strainer inside the appliance door. “To ensure trouble-free air circulation, you must clean my lint strainer after each drying cycle. First open the appliance door and press the unlocking bunion of the strainer lid.
Cleaning the strainer area Cleaning the inside of the drum Cleaning the screens and controls 42 Despite the lint strainer. lint will collect in the strainer area after some time. You should then clean the whole strainer stern, B Pen the loading door. B Take out the dint strainer. B Rasp the opened strainer fid at the top and pull it forwards unlit springs out of its holder, W The lint in the strainer area can now be easily removed.
you think your tumble dryer is not working properly...
44 Customer service if you find no reference to any particular fault In my Operating Instructions, please contact the service center. When doing 50, quote the E-No. and F-No. of your dryer. You will find these numbers on my rating plate.
BEY 8 Technical data Dimensions: * With worktop: Height 85.0cm Width 80.0cm Depth 80.0cm Without worktop: Height 82.0cm Width 59.50m Depth Connection: You will find information on electrical connection on the rating plate of your making. If your dryer Is designed for changeover, the instructions given in the changeover diagram on the junction box on the rear of the machine are to be additionally accomplish with.