L 99695 HWD EN User Manual
www.aeg.com CONTENTS 1. SAFETY INFORMATION.................................................................................................3 2. SAFETY INSTRUCTIONS................................................................................................ 5 3. PRODUCT DESCRIPTION.............................................................................................. 7 4. CONTROL PANEL...........................................................................................................8 5.
ENGLISH 1. 3 SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference. 1.1 Children and vulnerable people safety WARNING! Risk of suffocation, injury or permanent disability.
www.aeg.com • • • • • • • • • • • • • side, where the appliance door can not be fully opened. Connect the mains plug to the mains socket only at the end of the installation. Make sure that there is access to the mains plug after the installation. The ventilation openings in the base (if applicable) must not be obstructed by a carpet. Ensure you have good ventilation in the installation room to avoid the back flow of gases into the room from appliances burning other fuels, including open fires.
ENGLISH • • • • • • • • 5 Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber backed articles and clothes or pillows fitted with foam rubber pads should not be dried in the wash dryer. Fabric softeners, or similar products, should be used as specified by the fabric softener instructions. Remove all objects from pockets such as lighters and matches.
www.aeg.com level with the aid of a spirit level. If it is not, adjust the feet until it is. • To make sure the compressor works properly, wait 6 hours after the installation before using the appliance. 2.2 Electrical Connection WARNING! Risk of fire and electrical shock. • The appliance must be earthed. • Always use a correctly installed shockproof socket. • Do not use multi-plug adapters and extension cables. • Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
ENGLISH 3. PRODUCT DESCRIPTION 3.1 Appliance overview 1 2 3 10 4 11 12 5 6 13 7 9 8 1 2 3 4 5 6 7 8 Worktop Detergent dispenser Air filter(s) Control panel Door handle Rating plate Drain pump filter Feet for the appliance level 3.2 How to activate the child safety device This device prevents children or pets to be closed in the drum. Turn the device clockwise, until the groove is horizontal. You cannot close the door.
www.aeg.com 3.3 Accessories 1 2 4 3 1 Spanner To remove the transit bolts. 2 Plastic caps To close the holes on the rear side of the cabinet after the removal of the transit bolts. 3 Anti-flood inlet hose To prevent possible leakage 4 Plastic hose guide To connect the drain hose on the edge of a sink. 4. CONTROL PANEL 4.
ENGLISH 4.2 Display A K J B I H G C F D E The display shows: A The text bar: • Guides you in the use of the appliance. • Shows the programme status and phase. • Shows alarm messages. Refer to 'Troubleshooting' . The symbols appear on the display when the related phase or function is set. B Child safety lock Door locked C You cannot open the appliance door when the symbol is on. You can open the door only when the symbol goes off.
www.aeg.com Digit area Time of the day When you activate the appliance the display shows the time of the day for some seconds. To adjust the clock, refer to "Clock setting". Programme duration When you set the programme, the cycle duration is displayed for a few seconds then, the time of the programme end appears again. Programme duration indicator The indicator comes on when the digits shows the programme duration.
ENGLISH Time save The indicator comes on when you set one of the programme duration. F Shortened time Extra Quick G Indicator for air filters Extra rinsing H The value shows the total number of the rinses. The indicator bar fills accordingly the numbers of rinses. Stain indicator Prewash indicator I Soak indicator The indicator bar fills accordingly to the set functions. Spin speed of the set programme J No Spin indicator1) Rinse Hold indicator 1) Only available for SPIN/DRAIN programme.
www.aeg.com 5. PROGRAMMES 5.1 Programme Chart Programme Temperature range Maximum load Maximum spin speed Programme description (Type of load and soil level) Washing/Drying programmes1) Katoen - Blanc/ Couleurs 95°C - Cold 9 kg 1600 rpm 9 kg Katoen Eco - Co- 1600 rpm ton Eco2) 60°C - 40°C Synthetica - Synthétiques 60°C - Cold Wol/Zijde Laine/Soie 40°C - Cold Anti-Allergie Anti-Allergies 60°C White cotton and coloured cotton. Normal soil and light soil. White cotton and colour-fast cotton.
ENGLISH Programme Temperature range 13 Maximum load Maximum spin speed Programme description (Type of load and soil level) 4 kg 1200 rpm Delicate fabrics as acrylics, viscose, polyester items. Normal soil. 4 kg 800 rpm Synthetic items to be gentle washed. Normal and Super Eco Cold 3 kg 1200 rpm Mixed fabric (cotton and synthetic items).5) 20 Min. - 3 kg 40°C - 30°C 3 kg 1200 rpm Cottons and synthetics items with light soil level or worn only once. 9 kg 1600 rpm To rinse and spin the laundry.
www.aeg.com Programme Temperature range Maximum load Maximum spin speed Programme description (Type of load and soil level) up to 1.5 kg Steam programme for cotton and synthetic items. This cycle removes odours from the laundry.8) Opfrissen - Rafraîchir 40°C 1) When you set a Washing / Drying programme, the display tells you that the drying cycle is not set. If you want to dry your laundry, set an automatic drying or a timed drying.
ENGLISH Programme T./ min PreStains wash Soak Extra Spoelen Rinçage + 1) Tijd Besparen Gain de Temp s2) Startuitstel Départ Différé Anti-Allergie - AntiAllergies ■ ■ ■ ■ ■ Fijne Was - Délicats ■ ■ ■ ■ ■ ■ ■ Strijkvrij - Repassage Facile ■ ■ ■ ■ ■ ■ ■ Super Eco ■ ■ 20 Min. - 3 kg ■ Spoelen - Rinçage ■ Centrif./Pompen Essorage/Vidange ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ 1) If the Permanent Extra Rinse option is activated, the appliance adds some additional rinses.
www.aeg.com 5.
ENGLISH 17 At programme start the display shows the duration programme for the maximum load capacity. During the washing phase the programme duration is automatically calculated and can be greatly reduced if the laundry load is lower than the maximum load capacity (e.g. Cotton 60°C, maximum load capacity 9 kg, the programme duration exceeds 2 hours; real load 1 kg, the programme duration don’t reach 1 hour). When the appliance is calculating the real programme duration a dot blinks in the display.
www.aeg.com 8. OPTIONS 8.1 Touch Screen Make sure the touch screen and buttons are always clean and dry. 8.2 Aan/Uit - Marche/Arrêt Press this button to activate or deactivate the appliance. A tune sounds when the appliance is activated. The AUTO Stand-by function automatically deactivates the appliance to decrease the energy consumption when: • You do not use the appliance for 5 minutes before you pressStart/Pauze Départ/Pause button. All setting are cancelled.
ENGLISH 8.11 Vlekken - Taches/ Voorwas - Prélavage Touch this button to set one of the following functions: • Prewash Use this function for heavy soil. The appliance adds a prewash phase to the main wash. The programme duration increases. • Soak Use this function for heavy soil. The appliance soaks the laundry at 30°C for about half an hour before to wash. • Stains Use this function for laundry with hard stains to remove. When you set this function, put the stain remover into compartment .
www.aeg.com 2. When the display shows the necessary language touch Start/ Pauze - Départ/Pause button to confirm the selection. 9.4 Change the language after the first activation Prélavage at the same time for some seconds. 2. When the display shows the language set, turn the programme knob to set the new language. 3. Touch Start/Pauze - Départ/Pause button to confirm the selection. 1. Touch button T./min and button Vlekken - Taches/Voorwas - 10. DAILY USE - WASHING ONLY 10.
ENGLISH 10.5 Liquid or powder detergent Compartment for liquid additives (fabric conditioner, starch). Maximum level for quantity of liquid additives. Flap for powder or liquid detergent. Always obey the instructions that you find on the packaging of the detergent products. 1 A 2 1. 2. B 4. 3. • Position A for powder detergent (factory setting). • Position B for liquid detergent. When you use the liquid detergent: • Do not use gelatinous or thick liquid detergents.
www.aeg.com 10.7 Behaviour of the appliance After approximately 15 minutes from the start of the programme: • The appliance adjusts automatically the cycle time to the laundry you have put in the drum to have perfect washing results in the minimum necessary time. • The display shows the new time value. 10.8 Starting a programme with the delay start 1. Touch button Startuitstel - Départ Différé again and again to set the desired delayed start. The display show the expected end of the programme. 2.
ENGLISH In the display comes on and a message tells you that the programme is completed. The indicator of Start/Pauze - Départ/ Pause button goes off. 1. Press the button Aan/Uit - Marche/ Arrêt to deactivate the appliance. After five minutes from the end of the programme, the energy saving function automatically deactivates the appliance. 2. 3. 4. 5. When you activate the appliance again, the display show the end of the last set programme. Turn the programme knob to set a new cycle.
www.aeg.com At the beginning of the drying cycle (3 – 5 min.) there could be a slightly higher sound level. This is the compressor start and it is quite normal for compressor powered appliances such refrigerators, freezers and so on. 11.2 Automatic drying 1. Touch button Automatisch Automatique repeatedly to set the required dryness level. The indicators on the control panel illuminate accordingly: a. IRON DRY level - 1 indicator on: for cotton items b.
ENGLISH 25 12. DAILY USE - WASHING & DRYING WARNING! Refer to Safety chapters. 12.1 NON-STOP programme You can wash and dry your laundry setting a «non stop-programme». Proceed as follows: 1. Press button Aan/Uit - Marche/Arrêt for some seconds to activate the appliance . 2. Load the laundry one item at a time. 3. Put the detergent and the additives in the appropriate compartment. 4. Turn the programme dial to the washing programme. The display shows the default temperature and spin.
www.aeg.com 13. HINTS AND TIPS WARNING! Refer to Safety chapters. 13.1 The laundry load • Divide the laundry in: white, coloured, synthetics, delicates and wool. • Obey the washing instructions that are on the laundry care labels. • Do not wash together white and coloured items. • Some coloured items can discolour with the first wash. We recommend that you wash them separately for the first times. • Button up pillowcases, close zippers, hooks and poppers. Tie up belts.
ENGLISH Use the correct quantity of the water softener. Obey the instructions that you find on the packaging of the product. 13.6 Drying hints Prepare the drying cycle • Open the water tap. • Do a check if the connection of the drain hose is correct. Refer to installation chapter for more information. • For the maximum laundry load of the drying programmes, refer to the drying programmes table. 13.7 Items to do not dry Do no not set a drying programme for this laundry: • Very delicate items.
www.aeg.com 14.2 Descaling the drum. Make regularly a maintenance wash. To do this: If the water hardness in your area is high or moderate, we recommend that you use a water softener for washing machines. • Remove the laundry from the drum. • Set the cotton programme with the highest temperature with a small quantity of detergent. Regularly examine the drum to prevent limescale and rust particles. 14.4 Door seal To remove rust particles use only special products for washing machine.
ENGLISH 14.6 Cleaning the air filters The air filters collect the fluff. The fluff normally occurs when the clothes are dried in a washer-dryer. • At the end of each drying cycle in the display the indicator the primary air filter. The text bar says to clean the primary filter (see pict. 1-5). is on to tell you to clean may flash to remind you that both air filters should be • Occasionally the indicator cleaned.
www.aeg.com + 10. 9. Cleaning regularly the air filters with warm water allows you to have best drying performances. Clogged filter increases the drying time. WARNING! The primary filter recess must not be blocked by any object. If you only wash the laundry with your washer-dryer, it is normal to find some humidity in the primary air filter. 14.7 Cleaning the drain filter WARNING! Do not clean the drain filter if the water in the appliance is hot. 1. 2.
ENGLISH 3. 4. 1 5. 2 6. 1 2 7. 8. 1 2 9.
www.aeg.com 14.8 Cleaning the inlet hose filter and the valve filter It could be necessary to clean the filters when: • The appliance does not fill with water. • The appliance fills with the water for a long time. • The indicator of button Start/Pauze - Départ/Pause flashes and the display shows the related alarm. Refer to 'Troubleshooting'. To clean the water inlet filters: • Close the water tap. • Remove the water inlet hose from the water tap. • Clean the filter in the inlet hose with a stiff brush.
ENGLISH 14.9 Emergency drain Because of a malfunction, the appliance cannot drain the water. If this occurs, do steps (1) through (9) of 'Cleaning the drain filter'. If necessary, clean the pump. When you drain the water with the emergency drain procedure, you must activate again the drain system: 1. When you drain the water with the emergency drain procedure, you must activate again the drain system: Put 2 litres of water in the main wash compartment of the detergent dispenser. 2.
www.aeg.com Message Possible solution Make sure that the water tap is not clogged or is furred with lime-scale. Make sure that the filter of the inlet hose and the filter of the valve are not clogged. Refer to “Care and cleaning”. Make sure that the inlet hose is not damaged. Make sure that the connection of the water inlet hose is correct. The display tells to check the Make sure that the drain hose is not damaged. drain filter: the appliance does not drain the water.
ENGLISH Problem 35 Possible solution Deactivate the Child Lock function if it is on. The appliance does not drain Make sure that you have not set a programme without the water. drain phase. Make sure that you have not set an option which ends with water in the tub. The appliance fills with water Make sure that the drain hose is in the correct position. and drains immediately. The hose may be too low. The spin phase does not operate or the washing cycle lasts longer than usually.
www.aeg.com Problem Possible solution Use special products to remove the stubborn stains before you wash the laundry. Make sure that you set the correct temperature. Decrease the laundry load. The washing cycle is shorter than the time displayed. The appliance calculates a new time according to the laundry load. The washing cycle is longer than the time displayed. An unbalanced laundry load increases the duration time. This is a normal behaviour of the appliance. The internal lamp is off.
ENGLISH CAUTION! Make sure that the water temperature and the laundry are not hot. Wait till they cool down, if necessary. CAUTION! Make sure that the drum is not rotating. Wait till the drum stops rotating, if necessary. Make sure that the water level inside the drum is not too high. Proceed with an emergency drain, if necessary (refer to «Emergency drain» in «Care and cleaning» chapter). To open the door, proceed as follows: 37 1. Press the button Aan/Uit - Marche/ Arrêt to switch the appliance off. 2.
www.aeg.com • Remove the cardboard top. • Remove the polystyrene packaging materials. • Remove the internal film. • Open the door. • Remove the polystyrene piece from the door seal and all the items from the drum. • Put one of the polystyrene packaging elements on the floor behind the appliance. • Carefully put down the appliance with the rear side on it. • Make sure not to damage the hoses. • Remove the polystyrene protection from the bottom.
ENGLISH 39 • Pull up the appliance in vertical position. • Remove the power supply cable and the drain hose from the hose holders. • Remove the three bolts. • Use the key supplied with the appliance. • Pull out the plastic spacers. • Put the plastic caps in the holes. • You can find these caps in the user manual bag. We recommend that you keep the packaging and the transit bolts for any movement of the appliance. 16.2 Fixing plate kit (4055171146) Available from your authorized dealer.
www.aeg.com 16.3 Installation under a counter The appliance can be installed as freestanding or below the kitchen counter with correct space (see picture). 600 mm ≥ 870 mm CAUTION! To assure free air circulation under the appliance, do not attach the sound barriers (if available). 600 mm 16.4 Positioning and levelling • Install the appliance on a flat hard floor. • Make sure that carpets do not stop the air circulation below the appliance.
ENGLISH 41 16.5 The inlet hose • Connect the hose to the back appliance. Turn the inlet hose only left or right. • Loose the ring nut to set it in the correct position. 45 20 O O • Connect the water inlet hose to the cold water tap with 3/4 thread. CAUTION! Make sure that there are no leaks from the couplings. Do not use an extension hose if the inlet hose is too short. Contact the service centre for the replacement of the inlet hose. 16.6 Water-stop device The inlet hose has a water stop device.
www.aeg.com • Making an U form with the drain hose. On the edge of a sink • Make sure that the plastic guide cannot move when the appliance drains. Attach the guide to the water tap or the wall. To a stand pipe with vent-hole • Directly into a drain pipe at a height of not less than 60 cm (23.6”) and not more than 100 cm (39.3”). Refer to the illustration. • The end of the drain hose must always be ventilated , i.e. the inner diameter of the drain pipe (min. 38 mm - min. 1.
ENGLISH 43 To a sink spigot • Refer to the illustration. Put the drain hose in the spigot and tighten it with a clip. • Make sure that the drain hose makes a loop to prevent that remaining particles go in the appliance from the sink. To a wall-pipe • Directly to a built-in drain pipe in the room wall and tighten it with a clip. You can extend the drain hose to maximum 400 cm. Contact the service centre for the other drain hose and the extension. 17.
www.aeg.com Spin Speed Wool 1 Maximum 1600 rpm 1) Connect the water inlet hose to a water tap with a 3/4'' thread. 18. ENVIRONMENTAL CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environment and human health and to recycle waste of electrical and electronic appliances. Do not dispose appliances marked with the symbol with the household waste.
ENGLISH 45
www.aeg.
ENGLISH 47
132907350-A-092014 www.aeg.