AEG LAVAMAT TURBO 16810 The environmentally friendly washer dryer Экологичная стирально сушильная машина AUS ERFAHRUNG GUT Instruction booklet Руководство по эксплуатации
Contents Dear customer, Please read these operating instructions carefully and pay particular attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners. The warning triangle and/or the key words (Warning!, Caution!) emphasize information that is particularly important for your safety or correct functioning of the appliance. This symbol guides you, step by step, in the operation of the appliance.
Contents Preparing the drying cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Garments not suitable for drying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Drying symbols on garment labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Duration of the drying cycle . . . . . . . . . . . . . . . . . . . . . . . .
Safety instructions Safety instructions The safety of AEG appliances complies with the industry standards and with legal requirements on the safety of appliances. However, as manufacturers, we feel it is our duty to provide the following safety notes. General safety • Repairs to the machine must be carried out only by qualified personnel. Repairs carried out by inexperienced persons could cause serious danger. Contact your local AEG Service Centre.
Disposal Packaging materials The materials marked with the symbol are recyclable. >PE<=polyethylene >PS<=polystyrene >PP<=polypropylene This means that they can be recycled by disposing of them properly in appropriate collection containers. Machine Use authorised disposal sites for your old appliance.
Description of the appliance Description of the appliance Control panel B E C D FG Front view Detergent drawer Control panel A Door A B C D E F G H J = = = = = = = = = H J Option buttons Spin speed button Electronic drying button Display START/PAUSE button Delay start button Drying time button Programme progress display Programme selector dial Programme selector dial Drain pump Adjustable feet 10 The programme selector determines the type of washing cycle (e.g.
Description of the appliance Position corresponds to the ENERGY SAVING programme at approx. 67°C for normally soiled laundry, extended washing time (cannot be combined with QUICK ). Position at 40°C = Easy to iron. In this position the laundry is gently washed and spun to avoid any creasing. In this way ironing is easier. Position = cold wash Position = drying START/PAUSE button This button has three functions: a) Start After having selected the required programme, press this button to start the machine.
Description of the appliance Description of the appliance SOAK The machine performs a soak of about 30 minutes at 30°C. By pressing the DELAY START button the soak time can be prolonged up to 10 hours max. After this time the wash cycle will automatically start. This function cannot be used with WOOL , PREWASH or STAIN programme. The soak programme ends with a short spin in programmes for Cotton and Synthetics, and with emptying of the water without spinning for Delicates.
Description of the appliance When the programme has finished, if the OVERDOSAGE light comes on, it indicates that too much detergent has been used or that the drain filter is blocked. Description of the appliance Detergent dispenser drawer Cancelling a programme To cancel a programme which is running, turn the programme selector dial to the OFF position. Warning! After a programme which ends with water in the drum (RINSE HOLD option), turn the selector dial first to OFF and then to the DRAIN programme .
Preparing the wash cycle Preparing the wash cycle Weight of laundry Sort of laundry Sorting out and preparing the laundry • Sort out the laundry according to type of fabrics and care labels (see “Types of fabric and care labels”). • Empty pockets. • Remove any metal parts (safety pins, clips, etc.). • To prevent the laundry from getting damaged and forming bundles, it is advisable to close zips, button up pillowcases and quilt covers and tie up loose straps such as those of aprons.
Preparing the wash cycle Delicates 40 30 Microfibres, synthetics or curtains marked with these symbols require a very gentle treatment. The DELICATES programme is suitable for this type of fabric. 30 40 Woollens and particularly delicate items Fabrics such as wool, wool mix or silk marked with this symbol are particularly sensitive to machine washing. The WOOL programme is suitable for this type of fabric.
Preparing the drying cycle Preparing the drying cycle Drying symbols on garment labels As a dryer, the machine works on the condensation principle. Therefore, the water tap must be open and the drain hose must drain water into a sink or into the drain pipe, even during the drying cycle. Always look at the garment label to check whether garments can be machine dried.
Preparing the drying cycle Additional drying Should the laundry still be too wet at the end of the programme, set another short drying time. Warning! To prevent the formation of creases or shrinking of fabrics, avoid excessive drying. How to dry Drying only Rated load - cottons 3 kg - synthetics 2 kg During the drying programme the water tap must be open and the drain hose must be correctly positioned. Turn the programme selector dial to (DRYING) for cottons or synthetics .
How to wash How to wash Selection of the desired wash programme EXTRA RINSE Turn the programme selector dial to the desired position: the lights corresponding to the different phases making up the selected programme light on. The display shows the duration of the programme. This appliance is designed for saving water. However, for people with a very delicate skin (allergic to detergents) it may be necessary to rinse the laundry using an extra quantity of water (extra rinse).
How to wash How to wash Starting the programme 1. Check that the water tap is open. 2. Press START/PAUSE to start the programme. If the Delay Start option has been selected the programme will start at the end of the countdown. If the door light is red and flashing at the start of the programme it indicates that the door is open. Close the door and press the START/PAUSE button again. If the delay start option has been selected, the machine starts its countdown, in hours, which will appear on the display.
Programme chart Programme chart Special programmes Wash programmes Wash Temp. programme Fabrics Consumption* Additional Rated Energy Water Duration functions load kWh lt. min. Cotton and linen, for example norWhite Cottons 95°-60° mally soiled work garments, sheets, household linen, underwear, towels. STAIN SOAK QUICK PREWASH EXTRA RINSE RINSE HOLD SPIN SPEED Cotton and linen, for example normally to lightly soiled sheets and household linen.
Programme chart Consumption data for timed drying Timed Drying Degree of drying Type of fabric Rated load Spin speed Drying time mins Cotton and linen (towels, T-shirts, bathrobes) 3 kg 1600 70-80 1.5 kg 1600 35-45 2 kg 900 1 kg Store dry (*) Suitable for items to Synthetics and put away without mixed fabrics ironing (jumpers, blouses, underwear, household linen) Iron dry Suitable for ironing Cotton and linen (sheets, tablecloths, shirts, etc.
Cleaning and maintenance Cleaning and maintenance Door seal After each wash Check from time to time the door seal and eliminate eventual possible objects that could be trapped in the fold. At the end of the wash programme, pull the dispenser drawer out a little to let it dry. Leave the door ajar to allow air to circulate. If the machine is not used for a prolonged period: Close the water tap and unplug the appliance.
Cleaning and maintenance Water inlet filter If you notice that the machine is taking longer to fill, check that the filter in the water inlet hose is not blocked. Turn off the water tap. Unscrew the hose from the tap. Clean the filter in the hose with a stiff brush. Screw the hose back onto the tap.
Something not working? Problem Something not working? Possible cause Solution Problem The water tap is closed (E10). Open the water tap. The water inlet hose is squashed or kinked (E10). The machine does not fill The machine fills then empties immediately Check the whole length of the hose and remove the kink. The small filter of the water Clean the filter. inlet hose is clogged (E10). The door is not properly closed (E40). Close the door. The end of the drain hose is too low.
Something not working? Problem Something not working? Possible cause The unbalance detection device that prevents excessive vibration during spinning has cut in. Spinning starts late or the machine does not spin The water tap is not open (E10). Solution If the laundry is not evenly distributed inside the drum at the beginning of the spin cycle, the machine detects this and tries to redistribute it more evenly by means of a few drum rotations.
Technical data Height x Width x Depth Depth with door opened Height adjustment Rated load (depending on programme) Use Drum speed during washing Drum speed during spinning Water pressure Service 84x60x57 cm 100.5 cm ± 10 mm approx. 6 kg domestic max. 55 rpm 1600/1200/900/700/400 rpm 50-800 kPa This appliance complies with the following EC directives: - 73/23/EEC of 19.2.1973 “Low voltage directive”, including directive 93 / 68 / EEC - 89/336/EEC of 3.5.1989 “Electromagnetic Compatibility Directive”.
• This appliance is heavy, care should be taken when moving it. • When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the retailer. • All internal packing must be removed before using the appliance. Serious damage may be caused to the machine or adjacent furniture if the protective transit devices are not completely removed. Refer to the relevant paragraph. • Any electrical work required to install this appliance must be carried out by a qualified electrician.
Installation Installation Unpacking All transit bolts and packing must be removed before using the appliance. Using a spanner, unscrew and remove the 2 rear bottom screws. Slide out the 2 plastic pins. Lay the machine on P0001 its back, taking 025 care not to squash the hoses. This can be avoided by placing 1 one of the corner packing pieces between the machine and the floor. 2 Remove the polystyrene block from the 3 bottom of the machine and release the two plastic bags.
Installation The inlet hose is provided with a water stop device, which protects against damage caused by water leaks in the hose which could develop due to natural ageing of the hose. This fault is shown by a red sector in the window “A”. Should this occur, turn the water tap off and refer to your Service Centre to replace the hose. Water drainage The end of the drain hose can be positioned in three ways: Hooked over the edge of a sink using the plastic hose guide supplied with the machine.
AEG Hausgerate GmbH Postfach 1036 D-90327 Nurnberg http://www.aeg.hausgeraete.de © Copyright by AEG 132.994.
