KS7404001 KS7400021 EN OVEN USER MANUAL
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
Contents 3 CONTENTS 4 7 9 10 12 15 17 18 20 23 26 27 31 Safety information Product description Before first use Control panel Daily use Clock functions Automatic programmes Using the accessories Additional functions Care and cleaning What to do if… Installation Environment concerns The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance.
Safety information SAFETY INFORMATION Before the installation and use, read this manual carefully: • For your personal safety and the safety of your property • For the respect of the environment • For the correct operation of the appliance. Always keep these instructions with the appliance also if you move or sell it. The manufacturer is not responsible if incorrect installation or use results in damage.
Safety information 5 • Before the installation, make sure that the kitchen cabinet has the recess dimensions applicable. • Make sure that the appliance is installed below and adjacent safe structures. • Keep the minimum distances to the other appliances and units. • The appliance cannot be positioned on a base. • Built in ovens and built in cooking surfaces are attached with special connection system. To prevent damage to the appliance, only use an appliance with the appliances from the same manufacturer.
Safety information • Always close the appliance door when you cook, even while grilling. Care and cleaning • Before maintenance, switch off the appliance and disconnect the appliance from the power supply. • Before maintenance, make sure that the appliance is cold. There is the risk of burns. There is the risk that the glass panels can break. • Keep the appliance clean at all times. A build-up of fats or other foodstuff can result in a fire.
Product description 7 Service centre • Only an approved engineer can repair or work on the appliance. Contact an approved service centre. • Use only original spare parts. Disposal of the appliance • To prevent the risk of physical injury or damage – Disconnect the appliance from the power supply. – Cut off the mains cable and discard it. – Discard the door catch. This prevents children or small animals from being closed inside of the appliance. There is the risk of suffocation.
Product description 9 Shelf support, removable 10 Shelf positions Accessories • Wire shelf For cookware, cake tins, roasts. • Baking tray For cakes and biscuits. • Grill / roasting pan To bake and roast or as pan to collect fat. • Steam set One unperforated and one perforated food container. The steam set drains the condensing water away from the food during steam cooking. Use it to prepare food that should not be in the water during the cooking (e.g. vegetables, pieces of fish, chicken breast).
Before first use 9 • Sponge For absorbing residual water from the steam generator. • Core Temperature Sensor To measure how far the food is cooked. BEFORE FIRST USE WARNING! Refer to "Safety information" chapter. Initial Cleaning • Remove all parts from the appliance. • Clean the appliance before first use. Refer to chapter "Care and Cleaning". First connection to the mains After first connection to the mains all symbols in the display are on for some seconds.
Control panel CONTROL PANEL Electronic programmer 1 2 3 4 5 6 7 8 9 10 Use the sensor fields to operate the appliance. Sensor Field Function - DISPLAY Shows the current settings of the appliance. 2 ON/OFF To activate and deactivate the appliance. To set an oven function. 3 OPTIONS To set an automatic programme, cleaning function or an oven function. 4 MY FAVOURITE PROGRAMME To store your favourite programme.
Control panel 11 Display 1 2 7 3 6 5 4 Oven function symbol Temperature/Time display Clock/Residual heat display (also Minute minder and Time of day) Residual heat indicator Indicators for the clock functions (refer to the table "Clock functions") Heat up indicator Number of oven function/programme 1 2 3 4 5 6 7 Other indicators of display Symbols / / Name Description Automatic programme You can choose an oven programme. My favourite programme The favourite programme operates.
Daily use DAILY USE WARNING! Refer to "Safety information" chapter. To operate the appliance you can use: • manual mode -to set an oven function, the temperature and the cooking time manually. • automatic programmes -to prepare a dish when you do not have a knowledge or experience in cooking. Setting the oven function 1. 2. 3. Activate the appliance. The display shows a preset temperature, symbol and number of the oven function. or to set an oven function.
Daily use Oven function Application 10 Frozen Foods To make your convenience food like e.g. French Fries, Wedges, spring rolls crispy. 11 Turbo Grilling To roast larger meat joints or poultry with bones on one shelf position. Also to gratinate and to brown. 12 Fast Grilling 13 Grilling 14 Keep Warm 15 Defrost 16 Bottom Heat To bake cakes with a crispy base, and to preserve food. 17 ECO Roasting ECO functions let you to optimize the energy consumption during cooking.
Daily use The fast heat up is not available with every oven function. An acoustic signal operates if the fast heat up is not available for set function. Steam cooking The water drawer is in the control panel. 1. Fill the water drawer with 800 ml of water. The water supply is for approximately 40 minutes. CAUTION! Do not put water directly into the steam generator! Use only water as the liquid. Do not use filtered (demineralised) or distilled water. 2. Activate the appliance. 3.
Clock functions 15 Energy saving The appliance has some features that help you save energy during everyday cooking: • Residual heat: – the oven function or programme operates: the heating elements are deactivated 10% time earlier (the lamp and fan continue to operate). The condition: the cooking time is longer then 30 minutes or you use the clock functions (Duration, End, Time delay). – the oven is off: you can use the heat to keep the food warm.
Clock functions If you touch or during setting hours for DURATION, the appliance goes to setting of the END function. 6. When the set time ends, an acoustic signal operates for two minutes. symbol and time setting flash in the display. The appliance deactivates. Touch any sensor field or open the oven door to stop an acoustic signal. 7. Deactivate the appliance. Setting the END 1. 2. 3. 4. 5. 6. Activate the appliance and set an oven function and temperature.
Automatic programmes 2. 3. 4. 5. 17 Use or to set MINUTE MINDER. First you set seconds and then minutes and hours. or the MINUTE MINDER starts Touch automatically after five seconds. When set time ends, an acoustic signal operates for two minutes and "00:00" and flash in the display. Touch any sensor field or open the oven door to stop an acoustic signal. AUTOMATIC PROGRAMMES WARNING! Refer to "Safety information" chapter. There are 25 automatic programmes and recipes.
Using the accessories 5. 6. 7. The appliance starts. A symbol of the weight unit flashes in the display. During this or . Touch . time you can change the default weight value with When set time ends, an acoustic signal operates for two minutes. flashes. The appliance deactivates. Touch any sensor field or open the oven door to stop an acoustic signal. Automatic programmes with core temperature sensor The core temperature of the food is default and fixed in programmes with core temperature sensor.
Using the accessories 2. 3. 4. 5. 19 Put the point of the core temperature on the sensor (with the symbol handle) into the centre of the meat. Put the plug of the core temperature sensor into the socket at the front of the appliance. The display shows a flashing symbol and the default set core temperature. The temperature is 60 °C during the first use, and the last set value during each subsequent use. or to set the core temperTouch ature. or the settings save autoTouch matically after 5 seconds.
Additional functions When you cook with the core temperature sensor, you can change the temperature shown in the Temperature/Time display. After you put the core temperature sensor in the socket and set an oven function and temperature, the display shows the current core temperature. Touch again and again to see three other temperatures: • The current core temperature • The oven set temperature • The current oven temperature.
Additional functions 21 3. Deactivate the appliance. Using My Favourite Programme function: • To activate the function touch . The appliance activates your favourite programme. • To deactivate the function touch . The appliance deactivates your favourite programme. When the function operates, you can change the time and temperature. Child Lock The Child Lock prevents an accidental operation of the appliance. Activating and deactivating the Child Lock function: 1. Deactivate the appliance with .
Additional functions Indicator of the setting menu Description Value to set SET5 RESTORE SETTINGS YES/NO You can set the settings menu only when the appliance is off. Activate the Settings menu: 1. If necessary, deactivate the appliance . 2. Touch and hold for three seconds. The display shows "SET1" and "1" flashes. / to set the setting. 3. Touch . 4. Touch / to change the value of the setting. 5. Touch . 6.
Care and cleaning 23 CARE AND CLEANING WARNING! Refer to "Safety information" chapter. Notes on cleaning: • Clean the front of the appliance with a soft cloth with warm water and cleaning agent. • To clean metal surfaces use a usual cleaning agent. • Clean the appliance interior after each use. Then you can remove dirt more easily and it does not burn on. • Clean stubborn dirt with a special oven cleaner.
Care and cleaning 6. 7. An acoustic signal sounds when steam cleaning is completed. Touch a sensor field to stop the signal. Wipe out the appliance with a soft cloth. Remove water from the steam generator with the sponge and rub it dry. Keep the door open for approximately 1 hour to let the appliance dry fully. You can use the End function to delay start of the cleaning. Refer to "Setting the END". Shelf support You can remove the shelf support to clean the side walls. Removing the shelf support 1.
Care and cleaning 25 CAUTION! Put a cloth on the bottom of the interior of the appliance. It prevents damage to the lamp glass cover and the cavity. Replacing the lamp: 1. You can find the lamp glass cover at the cavity ceiling. Turn the lamp glass cover counterclockwise to remove it. 2. Remove the metal ring and clean the glass cover. 3. If necessary, replace the lamp with applicable 300°C heat-resistant lamp. Use the same lamp type. 4. Fit the metal ring to the glass cover. 5. Install the glass cover.
What to do if… The number of glass panels depends on the model. CAUTION! Put the oven door with the outer side down on a soft and level surface to prevent scratches Removing and cleaning the door glass panels 1. Remove the oven door. 2. Hold the door trim (B) on the top edge of the door at the two sides and push inwards to release the clip seal. 3. Pull the door trim to the front to remove it. B 4. 5.
Installation Problem Possible cause 27 Solution The oven lamp does not operate The oven lamp is defective Replace the oven lamp.
Installation min. 560 448-452 21 15 547 455 440 min. 550 547 448-452 448-452 333 594 567 21 15 min. 560 455 440 min.
Installation 547 21 448-452 15 455 440 448-452 455 448-452 min. 550 min.
Installation 3 90 0 4 20 2x3,5x25 13
Environment concerns 31 ENVIRONMENT CONCERNS The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product.
www.aeg.
