ÖKO_LAVAMAT 2550 The automatic washing machine which takes care of the environment Instructions for use 1
Printed on biodegradable paper He who believes in ecology, acts accordingly
Contents Safety instructions Before using your machine for the first time Safety Instructions for the user 4 4/5 The ÖKO-system The packing 6 6 For the sake of the environment ...
Safety instructions Before using your machine for the first time - Follow the installation and connection instructions - Do not connect a damaged machine (e.g. damaged during transport) - Small quantities of water in the detergent/additive compartment are due to factory tests - To remove residue from manufacturing in the wash drum and dispenser compartment, a wash programme without clothes should be carried out - e.g. colour wash 60°C with a 1/2 measuring beaker of detergent.
- - - - - - Do not switch the machine on if the electrical cord is damaged, or if the machine shows signs of damage to the control panel, the work surface or the base Repairs to electrical appliances may only be carried out by qualified personnel. Incorrect repairs can result in considerable danger for the user. Please only contact our factory customer service or a repair workshop approved by us. Only original AEG spare parts fulfil all requirements.
The ÖKO-system Your new ÖKO LAVAMAT from the AEG ÖKO System fulfils all current and future requirements of modern wash care and enables an individual and multiple choice of programmes. The most economical use of water, power and detergent contributes to environmental relief and ensures the best economy. The uniflow system Through the uniflow system, the detergent is continuously circulated. The system enables a 100% use of the detergent with every programme and all wash temperatures.
For the sake of the environment ... These instructions will help you to act in an environmentally conscious manner : ÖKO tips for economic washing For normally soiled washes, programmes without prewash are provided. Compared to a programme with pre-wash, you save on water and detergent. Only use detergent with bleach additive if the wash is soiled with spots which can be bleached. Bleaches are particularly effective at high temperatures. Consumption of the machine is most favourable when it is full.
Machine description A Equipment 8 B C D E F A Control Panel B Programme selector with programme indicator C Temperature selector D Pilot light E INTENSIVE button F Spin speed reduction button 850/700 rpm.
Equipment A B C D E A Control Panel B Lid C Handle for opening lid D Trap door for lint filter E Lever for castors 9
The compartment for detergent and additives F 10 H G F Compartment for Softener or pre-wash detergent G Detergent compartment for main wash H Compartment for liquid additives (fabric softener, fabric conditioner, starch)
Summary of instructions for use Prepare the wash Sort, pre-wash treatment Choose the programme Set the programme selector to the required programme. If required, press additional buttons Open the lid Place the laundry in the drum Add detergent Close the lid Turn the temperature selector Choose and select the temperature and the cycle starts. At the end of the programme After 2 minutes of waiting time, open the lid.
Before the wash Sort the washing Check that the fabrics are machine washable. This information is provided by the usual international washing symbols : High temperature wash Coloured wash Synthetics Delicate fabrics Wool Sort the wash according to type, degree of soiling and temperature. Woollen items with only the Wool symbol are not suitable for machine washing. To wash woollen items, the additional note “does not mat” or “machine washable” is necessary.
New, dark coloured items often have an excess of dye. During the wash, this can be transferred to lighter coloured fabrics. It is better to wash such items separately the first time. Treat stains as soon as possible, while they are still fresh, with water, soap or appropriate pre-wash treatment (stain spray, pre-wash paste etc) Pre-wash treatment Empty Pockets In particular, remove metallic objects (paper clips, safety pins etc.) Button pillow slips. Close zip fasteners, hooks and eyelets.
Notice for Test Institutes : For tests similar to IEC 456 (new) with standard load A the maximum load is 4,05 kg. Whenever possible, wash with a full load as this ensures maximum efficiency. Do not overfill. This has a negative result on the washing results. With synthetics articles particularly prone to creasing, you should reduce the load. Opening the washing machine To open the drum, press the button on the drum lid, press the drum lid down and open slowly.
Detergent You may use all modern detergents suited to domestic washing machines. The use of the detergent depends on the type of wash and the degree of soiling. Choice of detergent Soiling is differentiated according to : Dirt, e.g. dust, soot, sweat, grease etc. Bleachable stains, e.g. red wine, fruit, vegetables etc. Protein stains, e.g. blood, milk etc.
Detergent Quantities The quantity of detergent used depends on the size of the wash, the hardness of the water and the degree of soiling. Follow the instructions on the detergent packet. Your local water supply company can supply information concerning the hardness of the water.
1 3 2 There are three compartments in the detergent and additive dispenser. Compartment 1 Compartment 2 Compartment 3 Adding Detergent = softener for programmes without pre-wash ; washing powder and powder softener for programmes with pre-wash or soak. = washing powder for the main wash ; for programmes with pre-wash, also the softener.
Choosing the wash programme The wash programme is chosen with the programme selector, the temperature adjustment knob and the buttons. For normally soiled articles, choose a programme without pre-wash. For dirty articles choose a programme with prewash or use the “intensive” button (refer to the button description). For protein based stains (blood, cocoa), we recommend a programme with pre-wash. For heavily stained articles (fruit, vegetables, tea) press the INTENSIVE button.
During the programme, the dial of the programme selector rotates in steps and indicates which part of the programme is running. The programme indicator By combining main and additional programmes with the buttons, a programme for all needs can be obtained.
INTENSIVE This feature increases the wash “efficiency” by lengthening the wash time after the heating phase. Spin speed 850/700 push button You may reduce spin speed with this button for all programmes. If you do not press this button, spinning takes place at maximum speed.
End of programme At the end of the programme, the machine can be opened. Buttons which may have been set should be released by pushing again. Set the temperature selector on "0" position. Remove the washing. Check that the drum is completely empty, as otherwise articles could be damaged in the next wash cycle (e.g. shrinking) or could colour other articles.
List of programmes Wash symbol/ Wash Cotton/linen Cotton/linen Programme Programme selection Programme Temperature Buttons selector selector High temperature/ colour with pre-wash COLOUR High temperature/ colour without pre-wash COLOUR WITHOUT Saving programme COLOUR WITHOUT WITH PRE-WASH PRE-WASH PRE-WASH Cotton linen 30 ... 95 30 ... 95 E Colour wash COLOUR WASH 30 ... 60 SYNTHETICS WITH 30 ...
Programme cycle Load Up to 4,5kg Main wash with pre-wash, 3 rinse cycles, final spin Possible additional buttons 850/700 INTENSIVE Up to 4,5kg Main wash without pre-wash, 3 rinse cylces, final spin Up to 4,5kg Main wash without pre-wash, 3 rinse cycles, final 850/700 spin Up to 4,5kg Colour wash without pre-wash, 3 rinse cycles, final spin 2 kg Synthetics with pre-wash, 3 rinse cycles, rinse hold 2 kg Synthetics without pre-wash, 3 rinse cycles, rinse hold Up to 2 kg Synthetics without pre-wash, s
Consumption and times for selected programmes Programme Water consumption in litres Electricity consumption in kWh Time in minutes High temperature wash 95°C, 72 1,9 130 Colour wash 60°C, 72 1,3 115 Synthetics 40°C, 55 0,6 90 Wool 40°C, 65 0,6 55 The values in this table were established under normal conditions. Variations up or down are possible in practice. With programmes with pre-wash, the programme time is increased by approximately 25 minutes.
Maintenance and care Clean the dispenser compartment from time to time to remove remaining detergent. Dispenser compartment The wash drum is made of rust free stainless steel. Rusty objects not removed from the wash can cause rust spots to appear on the drum. These spots can be removed using stainless steel cleaner. The customer service has suitable products available. Wash drum When correct quantities of detergent are used, descaling of the machine is hardly necessary.
Cleaning the lint filter Regular cleaning of the lint filter is important If you wash articles containing a lot of lint, clean the filter after every wash. Place the water discharge hose in a flat container placed on the ground, to completely empty the machine. - Open the flap door of the filter compartment by pressing it inwards with a finger at the hinged side. - Turn the filter knob counterclockwise and pull the filter out. - Clean the filter thoroughly. - Refit the filter and turn the knob clockwise.
What to do if ... ... The washing machine does not work at all ? Is the machine connected to the power supply? Was a programme selected? Was a temperature selected? Are all the lids closed? ... No water runs in ? Is the water tap open? Is the filter in the water inlet blocked ? ... The spin cycle begins after a delay ? The electronic unbalance control system of the ma chine has operated due to unfavourable distribution of the wash.
... Grey traces are found on the finished wash ? Too little detergent was used for articles stained by ointment, grease or oil. The quantity of detergent is insufficient to dissolve grease ? Was the temperature chosen too low ? ... Traces of fabric softener are found on the finished wash ? In such cases, usually fabric softener, in particular in concentrated form, has gone directly into the wash outside of the machine. Such spots should be washed out as quickly as possible. ...
Customer Service Should you find no solution to a problem in the instructions for use, contact the customer service. Should you contact the customer service for one of the detailed solutions or as a result of incorrect operation, the visit of the customer service cannot be made free of charge, even during the guarantee period. Provide the customer service with the production number (E. No.) and series number (F. No.) which you will find on the plate on the inside of the lint filter trap door.
Technical Data Dimensions: Height Width Depth 65 cm 45 cm 65 cm (including installation) Connections : Details of electrical connection should be obtained from the rating plate. Ensure that the nominal voltage and current type correspond to the supply voltage and current type at the place of installation. Drum speeds : Washing : 55 rpm Spinning : 850 rpm Water pressure : 1 - 10 bar (= 10 - 100 N/cm² = 0,1 - 1,0 MPa) Weight empty : approx.
AEG Hausgeräte GmbH Muggenhofer Straße 135 D - 90429 Nürnberg © Copyright by AEG H 243 223 400 - 129 2332 31 - 04/95 31
