BS9304001 EN OVEN USER MANUAL
FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly.
Contents 3 CONTENTS 4 7 9 10 11 15 17 18 20 21 22 25 26 Safety information Product description Before first use Control panel Daily use Clock functions Automatic programmes Using the accessories Additional functions Helpful hints and tips Care and cleaning What to do if… Environment concerns The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance.
Safety information SAFETY INFORMATION Before the installation and use, read this manual carefully: • For your personal safety and the safety of your property • For the respect of the environment • For the correct operation of the appliance. Always keep these instructions with the appliance also if you move or sell it. The manufacturer is not responsible if incorrect installation or use results in damage.
Safety information • • • • 5 Make sure that the appliance is installed below and adjacent safe structures. Keep the minimum distances to the other appliances and units. The appliance cannot be positioned on a base. Built in ovens and built in cooking surfaces are attached with special connection system. To prevent damage to the appliance, only use an appliance with the appliances from the same manufacturer. Electrical connection • The appliance must be earthed.
Safety information Care and cleaning • Before maintenance, switch off the appliance and disconnect the appliance from the power supply. • Before maintenance, make sure that the appliance is cold. There is the risk of burns. There is the risk that the glass panels can break. • Keep the appliance clean at all times. A build-up of fats or other foodstuff can result in a fire.
Product description 7 • Use only original spare parts. Disposal of the appliance • To prevent the risk of physical injury or damage – Disconnect the appliance from the power supply. – Cut off the mains cable and discard it. – Discard the door catch. This prevents children or small animals from being closed inside of the appliance. There is the risk of suffocation.
Product description Oven accessories • Wire shelf For cookware, cake tins, roasts. • Baking tray For cakes and biscuits. • Grill / roasting pan To bake and roast or as pan to collect fat. • Patisserie tray For rolls, brezels and small pastries. Suitable for steam functions. Discoloration of the surface has no effect on function. • Sponge 150 For absorbing residual water from the steam generator.
Before first use 9 • Steam set Unperforated and perforated food container. • Core Temperature Sensor To measure how far the food is cooked. BEFORE FIRST USE WARNING! Refer to "Safety information" chapter. Initial Cleaning • Remove all parts from the appliance. • Clean the appliance before first use. CAUTION! Do not use abrasive cleaning agents! This can damage the surface. Refer to chapter "Care and Cleaning".
Control panel CONTROL PANEL Control Panel Electronic programmer 1 2 3 4 5 6 7 8 9 Use the sensor fields to operate the appliance Number Sensor field 1 - 2 3 4 Function Comment Display Shows the current settings of the appliance. On/off To activate and deactivate the appliance. OK and Shuttle Home Key To set different functions when the oven function operates: timer, child safety, Favourite Programme memory, Heat + Hold , SET + GO , Core Temperature Sensor setting change.
Daily use Display 1 2 1 2 3 4 5 3 5 11 Oven function Shows the current time Heat-up indicator Temperature Shows duration time or end time of a function 4 Other indicators of display Symbol Function Minute Minder The function is active. Time The display shows the current time. Duration Shows the time required for the cooking cycle. End Time Shows when the cooking cycle ends. Time Indication It shows how long the heating function operates.
Daily use Refer to Recipe Book for Assisted Cooking menu listing. Submenus for: Basic Settings Sy m bol Submenu Description Set Time of Day Sets the current time on the clock. Time Indication When ON, the displays shows the current time when you deactivate the appliance. SET + GO When ON, you can activate the functions when you activate the oven function. Heat + Hold When ON, you can activate this function when you activate the oven function.
Daily use Oven function 13 Application Eco Steam ECO functions let you to optimize the energy consumption during cooking. Thus it is necessary to set the cooking time first. To get more information about the recommended settings, refer to the cooking tables with the equivalent usual oven function. Moist Fan Baking For energy-saving baking and cooking of mainly dry bakery items as well as for baking in tins on one shelf position.
Daily use Oven function Application Preserving To preserve vegetables e.g. mixed prickels in glasses and liquid. Drying For drying of sliced fruits like apples, plums, peaches and vegetables as tomatoes, zucchini or mushrooms. Plate Warming To preheat your plate for serving. Steam Reheating To reheat your already cooked food directly on a plate. Eco Roasting For roasting larger joints of meat or poultry on one level. The function is also suitable for gratinating and browning.
Clock functions 15 4. Use to set the Duration for cooking time or End Time for switch-off time. The first steam shows after approximately 2 minutes. When the oven reaches set temperature an acoustic signal sounds. Another acoustic signal sounds at the end of cooking time or when water finishes. 5. Deactivate the appliance. After the oven cools down, soak up all remaining water from the steam generator with the Sponge and clean if it is necessary with some vinegar.
Clock functions Symbol Function End Time Description To set the switch-off time for an oven function (max. 23 h 59 min). You can use Duration and End Time at the same time, if you want to automatically activate and deactivate the appliance on a given time later. If you set the time for a clock function, the time starts to count down after 5 seconds. If you use the clock functions Duration and End Time , the appliance deactivates the heating elements after 90 % of the set time.
Automatic programmes 17 The Heat + Hold function operates for 30 minutes. The Heat + Hold function stays on if you change the oven functions. Extra Time The Extra Time makes the oven function continue after the Duration ends. • Applicable for all oven functions with Duration or Weight Automatic . • Not applicable for oven functions with Core Temperature Sensor. Activating the function: 1. When the cooking time ends, an acoustic signal sounds. Press any sensor field. 2.
Using the accessories With some programs turn over the food after 30 minutes. The display shows a reminder. Favourite Programme You can store your favourite settings like duration, temperature or oven function. They are available in Favourite Programme menu. You can store 20 programmes. Storing a program 1. Activate the appliance. 2. Select the oven function or Assisted Cooking function. 3. Press again and again until the display shows " SAVE ". Press OK to confirm. 4.
Using the accessories 19 You have to set: • The oven temperature • The core temperature Use only original parts. It ensures the best cooking result. Using the core temperature sensor: 1. Put the tip of the core temperature sensor into the centre of the meat. 2. Activate the appliance. 3. Put the plug of the core temperature sensor into the socket on the right-upper side of the cavity front. The display shows core temperature sensor. 4. Use shuttle in less than 5 seconds to set the core temperature. 5.
Additional functions Inserting the wire shelf and the deep pan together Put the wire shelf on the deep pan. Push the deep pan between the guide-bars of one of the shelf positions. ADDITIONAL FUNCTIONS Control Lock The Control Lock prevents an accidental change of the oven function . Activating the Control Lock 1. Activate the appliance. 2. Set the oven function. 3. Press again and again until the display shows Control Lock 4. Press OK to confirm. The Control Lock is active.
Helpful hints and tips 21 Activating the function: 1. Activate the appliance. 2. Set the heating function. 3. Press again and again until the display shows Duration . 4. Set the time. 5. Press again and again until the display shows SET + GO . 6. Press OK to confirm. To start SET + GO press any sensor field (except ). The set oven function starts. When the oven function ends, an acoustic signal sounds. When the oven function operates, the function Control Lock is on.
Care and cleaning Information on acrylamides Important! According to the newest scientific knowledge, if you brown food (specially the one which contains starch), acrylamides can pose a health risk. Thus, we recommend that you cook at the lowest temperatures and do not brown food too much. CARE AND CLEANING WARNING! Refer to "Safety information" chapter. Notes on cleaning: • Clean the front of the appliance with a soft cloth with warm water and cleaning agent.
Care and cleaning 23 3. Activate Steam Cleaning in the main menu. The process duration is shown in the display. 4. An acoustic signal sounds when the programme has finished. Press any button to switch the signal off. 5. Wipe out the oven with a soft cloth. Remove any residual water from the steam generator. 6. Leave the appliance door open for around 1 hour to completely dry the oven. Shelf support You can remove the shelf support to clean the side walls. Removing the shelf support 1.
Care and cleaning Oven door and glass panels To clean the oven door, remove it. CAUTION! Be careful when you remove the door from the appliance. The door is heavy! Removing the oven door 1. Open the oven door as far as it goes. 2. Fully press clamping levers (A) on the two door hinges. 3. Close the oven door until the first position (angle approximately 70°). 4. Hold of the oven door with one hand on each side and pull it away from the oven at an up angle.
What to do if… 25 Oven lamp WARNING! There is a risk of electrical shock. Oven lamp and the lamp glass cover can be hot. Before you change the oven lamp: • Deactivate the appliance. • Remove the fuses from the fuse box or deactivate the circuit breaker. CAUTION! Put a cloth on the bottom of the interior of the appliance. It prevents damage to the lamp glass cover and the cavity. Replacing the oven lamp: 1. You can find the lamp glass cover at the cavity ceiling.
Environment concerns Problem Possible cause Remedy The oven does not heat up The clock is not set Set the clock The oven does not heat up The necessary settings are not set Check the settings The oven does not heat up The Child Lock is activated Refer to "Deactivating the Child Lock" The oven does not heat up The fuse is released Make sure, if the fuse is the cause for the malfunction.
www.aeg-electrolux.