User manual

ManualsBrandsAEG ManualsDomestic AppliancesAG61A

Hand Held Vacuum Cleaner (Household Type)

Owner´s Guide

60 - 70 Series

IMPORTANT

For any advice on your cleaner and to order ﬁ lters and accessories,

please telephone the AEG Helpline on

+44 (0) 8445 611 611

IMPORTANT INFORMATION .....2-4

GUARANTEE.................................4

HOW TO ASSEMBLE.....................4

HOW TO USE.............................5-6

ROUTINE MAINTENANCE ............6

DUST CUP.....................................6

FILTER...........................................6

Summary of content (8 pages)

PAGE 1
Hand Held Vacuum Cleaner (Household Type) Owner´s Guide 60 - 70 Series IMPORTANT INFORMATION .....2-4 GUARANTEE.................................4 HOW TO ASSEMBLE.....................4 HOW TO USE.............................5-6 ROUTINE MAINTENANCE ............6 DUST CUP.....................................6 FILTER...........................................
PAGE 2
IMPORTANT INFORMATION WARNING IMPORTANT SAFEGUARDS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.
PAGE 3
IMPORTANT INFORMATION BEFORE YOU START CHECK THE VOLTAGE Before connecting the cleaner to an electrical supply, ensure that the voltage shown on the rating plate located beneath the cleaner is of the correct voltage for your electricity supply. If it is not, do not use the cleaner but refer back to your dealer. CONNECTING TO YOUR ELECTRICITY SUPPLY Permanently connected to the cleaner is a mains supply (2-core) cable fitted with a non-rewirable plug incorporating a 13A fuse.
PAGE 4
IMPORTANT INFORMATION SERVICE Should you require service on your AEG cleaner, please telephone AEG Customer Services on +44 (0) 8445 611 611. Before requesting service, please check whether your problem is covered under Service Checklist (see below). SERVICE CHECKLIST If your cleaner will not operate, check the plug connection, plug fuse and mains fuse. • Never allow the dust cup to become so full that it impedes the air-flow, thus reducing the cleaning efficiency of the machine.
PAGE 5
HOW TO ASSEMBLE ASSEMBLY PARTS HOW TO USE CAUTION: Moving parts. Make sure the power switch is in off (0) position before plugging in. 1 Vacuum cleaner 2 Crevice tool 1 Power Switch Brushroll on Suction Only Off ASSEMBLY / STORAGE Open Cup 1 Wrap electrical cord around the base of the cleaner. Secure electrical plug to cord to prevent cord from unwinding. TM 2 Riser Visor Nozzle Cover The Riser VisorTM nozzle features a rotating cover over the brush roll.
PAGE 6
HOW TO USE (continued) Cleaning Accessories CAUTION: Moving brush roll, power switch should be in suction only position when using hose. 1 Pull the hose from hose adaptor on cleaner. HOW TO MAINTAIN The instructions given in this booklet serve as a guide to routine maintenance. To avoid unnecessary service calls, check the hose, dust cup and dust cup filter often. Clear a clogged hose, empty the dust cup if it is full, and clean the dust cup filter when it is dirty.
PAGE 7
HOW TO MAINTAIN (continued) Brush Roll The brush roll turns to agitate, sweep and comb the carpet nap. Check the brush roll regularly to be sure it is in top condition. Cut away any hair or thread wound around the brush roll because the build-up could cause the brush roll to rotate unevenly.
PAGE 8
Questions? Call our Customer Service +44 (0) 8445 611 611 Thank you for purchasing an AEG cleaner. Don´t Forget to Use Genuine AEG Bags and Belts CAUTION: Damages caused by the use of non-genuine AEG bags are not covered by the AEG Limited Warranty. 101 Oakley Road, LUTON, BEDFORDSHIRE, LU4 9QQ Features of the AEG vacuum cleaner and accessories supplied with it are protected in Great Britain and abroad by Patents or Registered Designs. This appliance conforms with the requirements of the amended E.E.C.