Product Description AEG AB 300 / 350 AUG 05, 2002 1 of 8 PD99025-1
Base station key layout Dual digit display Play/Pause OGM/Rew Time Memo/FF On/Off/stop Code Delete Ring Vol. up Vol. down Key functions Dual digit display indicator: Volume control: (Vol. Up / Vol. Down Delete button: On/Off/Stop button: Time button: OGM/Backward skip button: Play/Pause button Memo/Forward skip button: Code button Ring Button AUG 05, 2002 To indicate status of the DAM (like Answering On/OFF, battery low) and number of messages being recorded.
When the machine is first powered up, the A/M will carry out a self-functional testing for 5 seconds and the Dual digit display will start to running until this testing complete. Then, it will sound with a long beep as well as a “00” show on the display. The A/M goes to the standby mode. Answering Machine Operation 1.Turn on and off the answering machine Press and hold the ‘On/Off’ button by 2sec The answering machine is activated on when it is originally in off mode.
jump to “set minutes” Press ‘FF’ or ‘RW’ to select minutes Press ‘Time’ button to accept setting. minute. Prompt at each selection. Prompt the days, hours and minute then back to standby or off mode. Note: If no confirmation within 10 second or the STOP button is pressed during each setting step, the A/M will keep the old setting. 2.
Press ‘Stop’ button Stop play back immediately Note: If there are old and new message recorded, will play new message first. If day/time is not set properly, the A/M will skip to prompt the day/time. (i.e. No day/time stamp will be announced). 4. Memo recording Press and hold ‘Memo’ button for 2 seconds A long beep to start memo recording. During memo recording, the display will shows ‘rE’ A long beep to stop memo recording. Press ‘Stop’ button. Note: maximum length of memo is 2 minutes.
Remote key functions Keys on remote Corresponding button on answer machine phone keypad 1 RW 2 Play/Pause 3 FF 4 OGM playback 5 OGM recording 6 Stop (Record/Play) 7 Delete current message 8 Answering off 9 Answering on / Toggle OGM1 or OGM2 0 Delete all old messages * Skip announcement during playback # Record a memo AUG 05, 2002 6 of 8 PD99025-1
Additional features Call screening You can screen incoming calls by waiting for the caller to begin leaving a message (to hear who it is), you may pick-up the line with using a parallel phone when there is someone on the line who you are waiting for. The answering machine will stop recording automatically when you pick up an extension phone. Toll saver User can program the number of rings for the machine to answer or set as ‘Toll saver’.
TEST MODE OPERATE : To enter the TEST MODE press and hold the “Delete” key, then power up the unit about 2 seconds release the “Detect” key, until after 2 long beep sound (Wait count about 5 seconds), the unit should initial all memory when success enter test mode. 1. KEY FUNCTION KEY OGM/REW ON / OFF STOP Play/Pause MEMO/FF TIME FUNCTION Press and release to record through the MIC input or from telephone line. Press “STOP” key to stop record. Press and release to seize telephone line.