important per-installation instructions What you must note before installing and connecting your appliance These build-in hobs ate intended fos insertion in 2 worktop cutout Only an authorized electrical installer should connect your appliance.
Installation important! Access protection is only assured when the appliance is builtin. Switch on safety devices of main switch only after appliance affiliations. The appliance must be installed and mounted in the kitchen furniture as indicated i these installation and operating instructions. We should strongly emphasis that we are unable o assume any liability for direct and indirect damage resulting from incorrect connection or improper installation.
VITRIOLIC cooking areas Appliance description K 6e t 145 mm dia cooking zone. 1200 W 2 180 mm diw cooking zone, 1700 W 3 210 mm dha cooking zone, 2100 W 4 Ipswich S Amber pool damp which SNOWS as 3001 35 & heating element 15 switched on & Residual neat indicator 10r ach Nob individually s K 1145 dammed cooing 2008, 1200 W 2 180 mun diz cooking zone.
The switch AN 0 ) S The switch can be used for continuously arable setting of the healing capacity required 1 each case ¥ can be rotated to te right or left The switch has two engagement points intended to represent a perceptible range division. The sifting range between "0" and 114" is the keeping-warm and simmering range.
The switch Switch tor dual-circuit hob (611 K/ 614 K, 615 X} To switch on the small heating circuit (120 mm dia 3, wen on switch 4 (RH rear or LH front}. Yo switch on in addition the large heating circuit {210 mm dial. chin switch 7. Now both heating circuits are switched on Switch for halogen cooking zone(s) (614 K / 615 K} To switch on the halogen cooking zones) turn on switch 4.
The correct utensils In any case, utensils with an even bottom Please make sure tha! the utensils are precise should be used {commercially available electric ly placed on the cooking zone markings. wienies or utensils made of e same glass ceramic material), since uneven pols and pans insufficiently absorb the heat from the cooking zone and thereby lead 1o excessively long cooking times and damage 1o the hob For the same reasons, you should ot use excessively small utensils.
Cleaning and care of the glass ceramic cooking area Cleaning Thoroughly clean the coaching area beloved first use and regularly thereafter. You should generally wait unit the cooking area has cooled 1o hand heat before cleaning it. When cold or warm, the cooking area can generally be cleaned more easily, and you are hen well protected against burning, After very cleaning, it is important to wipe your hob with & damp cloth and then 1o polish # dry. Basically.
Cleaning and care (protection) It you want 1o o more for your glass ceramic hob, we recommend agents such as “Prolific” or “Era-fix” specially developed for this purpose. “Profiterole” snd "Era-ix” clean and protect the cooking area by means of a thin, water and girt-repentant film. if you occasionally use one of these agents, you will always have an easy-1-clean hob which is also protected against attack by sugar and strongly sugar-containing foods.
Rating plate The rating plate is located on the underside of the build-in bob and on the back of these installation and Operating Moonstruck What (something goes wrong)? . the pilot lamp does not show? ® You may not nave used the correct switch or W he loose has responded What to do when calling the service center tender “What have lisle the sources of faults which you cen rectify yourself.
AEG Desperate AG Posthaste 1036 D-80327 Kornberg 1 @ Copyright by AEG H 260215400 0190/ AEG Domestic Appliances Lid Customer Care Department 85-77 High Street Slough Berkshire SL11DZ Telephone: 08705 350350