12 Contents Description of the appliance 13 General details 13 Extractor version 13 Filter version 14 Safety warnings for kitchen unit installer 14 Electrical connections 15 Satay warnings for electrician 15 _ Safety warnings for user 18 Hood operation 17 Care and Maintenance 18 Grease filter 18 Hand washing 18 Dishwasher machine 18en Active carbon filter 18 Cleaning 19 Replacing the lamps 19 Technical details 20 Spacial Accessories 20 Technical Assistance Service Printed on recycled paper.
Description of the appliance 1) Pull-out anal 2) Grease filters (2 pieces) 3) Hob light 4 Fan speed cursor 5) Light switch General details Tne hood is supplied in the textual evacuation version, but may also be used with the internal recycling friction by inserting an active carbon filter (Special accessories). Exhaust vapors are pushed outwards by means of a pips. i the exhaust pips is in a horizontal position, it must be inclined upwards at a angle guarantee better evacuation.
Filter version Safety warnings for kitchen unit installer 14 Exhaust vapors are purified by means of ah active carbon filler {Special accessories) and directed back inside. To insert the active carbon filter, remove the grease filters. Fit the active carbon filter by inserting it first into the upper hooks and then into the lower ones; then lack into position by using the blocking tabs € (fig. 1).
Hoods can only be used safely with appliances connected to a chimney if the room and/or flat (air environment combination) is ventilated from outside using a suitable ventilation hole approximately 800-600 crn? large to avoid the possibility of a depression being created during operation of the hood. # you have any doubts, contact the relevant controlling authority or building inspector's office.
Satiety wakings for user 18 Installing the socket directly above the hood or above the wall unit mounted above the hood offers the following advantages: 1. The socket cannot be seen. 2. The unit can be disconnected whenever required by simply taking out the plug. : Electrical connections 230V using fixed power supply line with plug. 240 V using fixed power supply line (Great Britain), {The unit should only be connected up by an authorized electrician. .
Hood operation The control panel of the fan hood is on the front of the appliance {see pag. 13). The two cursor switches are for the various fan functions: one is for the fan speed and the other is for the hob light. The button with the symbol is for switching on and off the hob fight. The bitten with the symbols maladjusted the far speed o intensity.
Grease filter Hand washing Dishwasher machine 18 Care and Maintenance Always turn off the appliance before carrying out any repair or maintenance work, For safely reasons, unplug at the wail socket. The purpose of the grease filters is to aspirate grease particles which form during cooking and it must always be used, either in the textual evacuation or internal recycling function. You should take out my grease filters every four weeks and wash them either in the dish washing machine or by hand.
This filter is used when the hood functions for internal recycling. The original AEG active carbon filter should be used (see Spectacle accessories). Iris neither washable nor re-usable. in normal cooking ‘conditions, we recommend that it be replaced every 4 months. To replace the active carbon filter, push the docking tabs E inwards and the filter downwards (see diagram on pag. 14). When ordering a new active carbon filter, indicate the mode! description and fan hood serial number.
20 Technical details Weight: 350D 4500 Net: 10,3Kg 9,5 Kg Maximum absorbed power: 330 W Motor absorption: 2x125 W Lighting: Fan powers (speed), speed in compliance with DIN 44971 Level Min.speed Max. speed Intensive speed Extractor: 204 m#h 350 m¥h 518 m¥n Version: 120 m¥%h 300 m¥h 352 m¥h Special accessories MKZ telescopic wall pipe E-NR.