ÖKO-LAVAMAT 1271 T TURBO The environmentally friendly washer-dryer La lavadora-secadora ecológica A környezetbarát mosó- és szárítógép Instruction booklet Instrucciones para el uso Használati utasítás 500 700 + 900 1200 O G F D C B A 95 E 60 50 40 30 60 50 30 40 AUS ERFAHRUN GUT 30 40 30 40
Dear customer, Please read these operating instructions carefully and pay particular attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners. The warning triangle and/or the key words (Warning!, Caution!) emphasize information that is particularly important for your safety or correct functioning of the appliance. This symbol guides you, step by step, in the operation of the appliance.
Contents Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Tips for environmental protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Main features of your washer-dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Description of the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Preparing the drying cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Load . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Garments not suitable for drying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Drying symbols on garment labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Duration of the drying cycle . . . . . . . . . . . . . . . . . . . . . . . .
Contents Technical data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Instructions for installation and electrical connection . . . . . . . . . . . . . . 44 Safety instructions for the installer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Dimensions of the appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety instructions The safety of AEG appliances complies with the industry standards and with legal requirements on the safety of appliances. However, as manufacturers, we feel it is our duty to provide the following safety notes. General safety • Repairs to the machine must be carried out only by qualified personnel. Repairs carried out by inexperienced persons could cause serious danger. Contact your local AEG Service Force Centre.
Safety instructions Child safety • Children are often not aware of how dangerous electrical appliances can be. When the machine is working, children should be carefully supervised and not be allowed to play with the appliance - there is a risk that they could become trapped inside. • The packaging components (e.g. plastic film, polystyrene) can be dangerous to children - danger of suffocation! Keep them out of children’s reach. • Keep all detergents in a safe place out of children’s reach.
Disposal Packaging materials The materials marked with the symbol are recyclable. >PE<=polyethylene >PS<=polystyrene >PP<=polypropylene This means that they can be recycled by disposing of them properly in appropriate collection containers. Machine Use authorised disposal sites for your old appliance.
Main features of your washer-dryer • Programme and temperature setting using the programme selector. • Stain programme for effectively treating stained washing. • Energy saving programme for normally soiled cotton items. • Speed for the final spin can be reduced to 900, 700 or 500 rpm. • RINSE HOLD: the laundry is left immersed in the final rinse water to prevent creasing. • Delay timer: programme start can be delayed by 1 to 19 hours (e.g. to times with a more economical power rate).
Description of the appliance Front view Detergent drawer Control panel 500 700 900 1200 + O G F D C B A 95 E 60 50 40 30 60 50 30 40 30 40 30 40 Door Drain filter Adjustable feet 10
Description of the appliance Control panel E 500 700 O G F D C B A 900 1200 + 95 E 60 50 40 30 60 50 30 40 30 A B C D A B C D E F G H J K = = = = = = = = = = F GH J 30 40 40 K Mains-on light ON/OFF button Delay start button Display Drying time button Option buttons START/PAUSE button Spin speed button Programme progress display Programme selector dial Programme selector dial The programme selector determines the type of washing cycle (e.g.
Description of the appliance The selector dial can be turned either clockwise or anticlockwise. Position E corresponds to the ENERGY SAVING programme at approx. 67°C for normally soiled laundry, extended washing time (cannot be combined with STAIN and QUICK ). ON/OFF button Press this button to switch the machine on. Press it again to switch the machine off. Mains-on light This light comes on when the ON/OFF button is pressed, and goes out when it is pressed again.
Description of the appliance During the last hour, the remaining time is displayed every 5 minutes. The delayed start function cannot be used with the SPIN F - G or PUMP OUT D programmes. To alter or cancel the preset delay, press the START/PAUSE button, then press the DELAY START button until the required time is displayed or, if you wish to cancel the delay, until the symbol h is displayed. Then press the START/PAUSE button again.
Description of the appliance PREWASH The machine performs a prewash cycle at 40°C max. The prewash cycle ends with a short spin in programmes for Cotton and Synthetics, and with emptying of the water only for Delicates. This option is not available with the wool programme. For use when washing heavily soiled laundry. Important: the STAIN, PREWASH and QUICK WASH options cannot be selected together: one automatically disables the others. EXTRA RINSE Can be used with all programmes except the wool programme.
Description of the appliance Display The display shows the following information: • if the programme selector dial is on the RESET O position, three flashing dashes appear immediately after pressing the ON/OFF button to indicate that the machine is ready to receive instructions for the required wash programme; • duration of the selected wash programme, calculated automatically on the basis of the maximum recommended load for each type of fabric. • Selected drying time (max.
Description of the appliance Cancelling a programme To cancel a programme which is running, turn the programme selector dial to the RESET O position: three flashing dashes will be displayed. Warning! After a programme which ends with water in the drum (RINSE HOLD option), turn the selector dial first to RESET O and then to the PUMP OUT programme D. Altering a programme which is running To alter a programme, first set the machine to PAUSE by pressing the START/PAUSE button .
Description of the appliance Detergent dispenser drawer Programme chart Compartment for prewash or soak detergent and stain remover. The prewash or soak detergent is added at the beginning of the wash programme. The stain remover is added during the STAIN-Action phase in the main wash. Compartment for powder or liquid detergent used for main wash. It is emptied at the beginning of the wash cycle. Compartment for liquid additives (fabric softener, starch). It is emptied at the last rinse.
Preparing the wash cycle Sorting out and preparing the laundry • Sort out the laundry according to type of fabrics and care labels (see “Types of fabric and care labels”). • Empty pockets. • Remove any metal parts (safety pins, clips, etc.). • To prevent the laundry from getting damaged and forming bundles, it is advisable to close zips, button up pillowcases and quilt covers and tie up loose straps such as those of aprons. • Turn double faced items inside out (sleeping bags, anoraks, etc.
Preparing the wash cycle Weight of laundry Sort of laundry Approximate dry weights Bathrobes 1200 g Work shirts 300-600 g Quilt covers 700 g Sheets 500 g Blouses 100 g Hand towels 200 g Tea towels 100 g Shirts 200 g Pillowcases 200 g Night-gowns/Pyjamas 200-250 g Tablecloths 200-300 g Underwear 250 g Types of fabric and care labels The labels on garments help you to select the most suitable wash programme.
Preparing the wash cycle Delicates 40 30 Microfibres, synthetics or curtains marked with these symbols require a very gentle treatment. The DELICATES programme is suitable for this type of fabric. 40 Woollens and particularly delicate items Fabrics such as wool, wool mix or silk marked with this symbol are particularly sensitive to machine washing. The WOOLLENS programme is suitable for this type of fabric.
Preparing the wash cycle Detergents and additives Which detergent and additive? Use only detergents and additives for washing machines. Follow the manufacturer’s instructions.
Preparing the drying cycle As a dryer, the machine works on the condensation principle. Therefore, the water tap must be open and the drain hose must drain water into a sink or into the drain pipe, even during the drying cycle. Load Sort of laundry Linen and cottons Synthetics max. load (dry weight) 2.5 kg 2 kg Warning: Loads of washed laundry exceeding these values must be divided before being dried, otherwise poor results will be obtained.
Preparing the drying cycle Drying symbols on garment labels Always look at the garment label to check whether garments can be machine dried. The following symbols refer to drying: Machine drying is usually possible Normal drying (normal temperature) Gentle drying (reduced temperature) Do not machine dry Garments marked with the symbol should not be machine dried.
Preparing the drying cycle Additional drying Should the laundry still be too wet at the end of the programme, set another short drying cycle. Warning! To prevent the formation of creases or shrinking of fabrics, avoid excessive drying. Automatic washing and drying (NON-STOP programme) The NON-STOP programme can be used with • cottons, linen • synthetics It cannot be used for delicate fabrics and woollens.
How to wash Load the laundry Open the door. Place the laundry in the drum, one item at a time. Distribute laundry as evenly as possible. Close the door. Add detergent and additive Pull the drawer out till it stops. Pour the main wash detergent into compartment . If you wish to perform a prewash, or a STAINAction programme, pour detergent or stain remover into compartment . Important! Do not use normal detergent for the STAIN-Action programme, always use a STAIN remover.
How to wash Selection of the desired wash programme Turn the programme selector dial to the desired position: the lights corresponding to the different phases making up the selected programme light on. O G F D C B A 95 E 60 50 40 30 60 50 30 40 30 40 30 40 Selection of the spin speed To select the desired spin speed, press the SPIN SPEED button: the corresponding light comes on.
How to wash Selection of the DELAY START option To delay starting of a programme, press the DELAY START button before starting the machine. The figures corresponding to the selected delay will be displayed for about 2 seconds, after which the duration of the selected programme will appear on the display. When the START/PAUSE button is pressed, the selected delay will again appear on the display and the machine starts its countdown.
How to wash At the end of the programme The machine stops automatically and three flashing zeros are displayed. The END and spin speed pilot lights, as well as the pilot light(s) corresponding to the selected option(s), stay on. If the RINSE HOLD option has been selected, the corresponding pilot light on the programme progress display flashes to indicate that the water must be emptied out before opening the door. The pilot light of the START button flashes and tree flashing zeros are displayed.
How to dry Drying only Warning! Do not exceed the maximum laundry loads: - 2.5 kg for linen and cottons - 2 kg for synthetics. The water tap must be open and the drain hose must be positioned in the sink or connected to the drain pipe. Depress the ON/OFF button to switch the machine on. Select the drying programme (for cotton or synthetics). Depress the DRYING TIME button until the time you want appears in the display. Press the START/PAUSE button to start the programme.
Programme chart Wash programmes Wash Temp. programme Fabrics Additional functions Consumption* Max. Energy Water Duration load Kwh lt. min. Cotton and linen, for example norWhite Cottons 95°-60° mally soiled work garments, sheets, household linen, underwear, towels. STAIN QUICK PREWASH RINSE PLUS RINSE HOLD SPIN SPEED 5 kg Cotton and linen, for example normally to lightly soiled sheets and household linen.
Programme chart Special programmes Programme Type of laundry Programme phases Soak A Soak at 40°C. Stop with water in drum. To empty only: press the START/PAUSE button . Heavily soiled To empty and spin: select the desired spin fabrics, except wool. speed and press the START/PAUSE button. The machine automatically empties itself after 18 hours. Gentle rinses B This programme can be used for rinsing hand washed garments. 3 rinses with liquid additive. Short spin.
Programme chart Drying Degree of drying Extra dry Ideal for towelling materials Type of fabric Cotton and linen (bathrobes, bath towels, etc.) Cotton and linen (towels, T-shirts, bathrobes) Store dry (*) Suitable for items to Synthetics and put away without mixed fabrics ironing (jumpers, blouses, underwear, household linen) Cotton and linen (sheets, tablecloths, shirts, etc.) Iron dry Suitable for ironing Synthetics and mixed fabrics (shirts, blouses, household linen) Max.
Consumption data for drying The values shown in the chart have been obtained in laboratory tests. They may vary when the appliance is used at home, but they can be used as indicative values. Spin speed Max quantity Cotton Extra dry 1200 2.5 kg Cotton Store dry 1200 2.5 kg Cotton Iron dry 1200 2.
Cleaning and maintenance After each wash At the end of the wash programme, pull the dispenser drawer out a little to let it dry. Leave the door ajar to allow air to circulate. If the machine is not used for a prolonged period: Close the water tap and unplug the appliance. Periodical cleaning Exterior Clean the outside of the cabinet with soap and water only. Rinse with clean water and dry. Important: do not use methylated spirits, solvents or similar products to clean the cabinet.
Cleaning and maintenance Drain filter The drain filter collects threads and small objects inadvertently left in the laundry. Check regularly that the filter is clean. Open the filter door. Place a container under the filter and unscrew it; some water will come out of the filter. Pull out the filter. Clean the filter under a running tap, then refit it, screwing it fully in.
Cleaning and maintenance Emergency emptying out If the water is not discharged (pump is blocked, filter or drain hose are clogged), proceed as follows to empty out the machine: • pull out the plug from the power socket; • close the water tap; • if necessary, wait until the water has cooled; • place a bowl on the floor; • put the drain hose end into the bowl and let the water out.
Something not working? If, during the spin cycle, the machine makes an unusual whistling noise, different from the noise made by traditional washing machines, this is due to a new type of motor. If water is not visible in the drum, this is due to the modern technology of new washing machines that use less water than traditional machines. Troubleshooting If a problem arises, you can try to solve it yourself following the instructions below.
Something not working? Problem Possible cause Solution The water tap is closed (E00). Open the water tap. The water inlet hose is squashed or kinked (E00). The machine does not fill The machine fills then empties immediately Check the whole length of the hose and remove the kink. The small filter of the water Clean the filter. inlet hose is clogged (E00). The door is not properly closed (E20). Close the door. The end of the drain hose is too low.
Something not working? Problem The machine vibrates or is noisy The door will not open Possible cause Solution The transit bolts have not been removed. Check that the machine has been unpacked as described in the Installation section. The feet have not been adjusted. Carefully level the machine. There is little laundry in the drum. Correct operation of the machine is not affected. The programme is still running. Wait until the end of the programme before opening the door.
Something not working? Problem Possible cause Solution The unbalance detection device that prevents excessive vibration during spinning has cut in. If the laundry is not evenly distributed inside the drum at the beginning of the spin cycle, the machine detects this and tries to redistribute it more evenly by means of a few drum rotations. Only when the laundry is more evenly distributed will the spin cycle be performed, at a lower speed, if the laundry is not evenly distributed.
Something not working? Unsatisfactory washing results If the laundry looks grey and lime scale is found in the drum • Too little detergent has been used. • An unsuitable detergent has been used. • Stubborn stains have not been treated prior to washing. • The programme/temperature has not been correctly selected. If grey stains remain on the laundry • Laundry stained with ointments, grease or oil has been washed with an insufficient amount of detergent.
Technical data Height x Width x Depth Depth with door opened Height adjustment Net weight Load (depending on programme) Use Drum speed during washing Drum speed during spinning Water pressure 85x60x57 cm 94 cm ± 13 mm approx. 76 kg approx. 5 kg max. domestic max. 55 rpm 1200/900/700/500 rpm 1 - 10 bar 2 (=10-100N/cm = 0.1-1.0Mpa) This appliance complies with the following EC directives: - 73/23/EEC of 19.2.1973 “Low voltage directive”, including directive 93 / 68 / EEC - 89/336/EEC of 3.5.
Service In the section “Something not working?” some problems that can be solved by yourself are listed. Read this section in the event of problems. If you are not able to find a solution, contact the Service centre. (Addresses and telephone numbers are given on the enclosed leaflet). In all cases, ex plain your problem carefully, in order to facilitate troubleshooting: the engineer will be able to decide whether a service call is necessary. Take note of the serial number (F-Nr.
Instructions for installation and electrical connection Safety instructions for the installer • This appliance is heavy, care should be taken when moving it. • When unpacking the appliance, check that it is not damaged. If in doubt, do not use it and contact the retailer. • All internal packing must be removed before using the appliance. Serious damage may be caused to the machine or adjacent furniture if the protective transit devices are not completely removed. Refer to the relevant paragraph.
Dimensions of the appliance Front view and side view 600 500 700 + 940 900 1200 O G F D C B A 95 E 60 50 40 30 60 50 30 40 30 40 30 40 10 100 850 40 570 Rear view 340 40 170 50 Cold water Power cable Drain 45 85 45
Installation Unpacking All transit bolts and packing must be removed before using the appliance. Using a spanner, unscrew and remove the rear right-hand bolt and lay the machine on its back, taking care not to squash the hoses. This can be avoided by placing one of the corner packing pieces between the machine and the floor. Remove the polystyrene block from the bottom of the 2 machine and 1 release the two plastic bags by removing the adhesive strip.
Installation Positioning Install the machine on a flat hard floor. Make sure that air circulation around the machine is not impeded by carpets, rugs etc. • Before placing it on small tiles, apply a rubber coating. • Never try to correct any unevenness in the floor by putting pieces of wood, cardboard or similar materials under the machine.
Installation Water inlet Connect the water inlet hose to a separate tap with a 3/4" thread after havA ing inserted the small filter “A” supplied with the machine. The other end of the inlet hose which connects to the machine can be turned in any direction. Simply loosen the fitting, rotate the hose and retighten the fitting, making sure there are no water leaks. The inlet hose must not be lengthened.
Installation Electrical connection This machine is designed to operate on a 220-230 V, single-phase, 50 Hz supply. Check that your domestic electrical installation can take the maximum load required (2.2 kW), also taking into account any other appliances in use. Connect the machine to an earthed socket. The manufacturer does not accept any responsibility for damage or injury through failure to comply with the above safety precaution.