LAVAMAT 88810 Washing machine User information Downloaded From WashingMachine-Manual.
Dear customer, Please read this User Information carefully and keep it to refer to at a later date. Pass this User Information on to any subsequent owner of the appliance. 1 3 2 The following symbols are used in the text: Safety instructions Warning: Notes that concern your personal safety. Attention: Notes that show how to avoid damage to the appliance. Useful tips and hints Environmental information Downloaded From WashingMachine-Manual.
Contents Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Description of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . What is shown in the display . . . . . . . . . . . . . . . .
What to do if... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Remedying small malfunctions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . If the wash results are not satisfactory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Carrying out an emergency drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Drain pump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Instructions 1 Safety Prior to using for the first time • Follow the ”Instructions for installation and connection”. • If the appliance is delivered in the winter months when there are minus temperatures: Store the washing machine at room temperature for 24 hours before using for the first time. Correct use • The washing machine is only designed for the washing of normal domestic laundry at home. • Additions or modifications to the washing machine are not permitted.
General safety • Repairs to the washing machine must only be carried out by qualified service engineers. • Never use the washing machine if the mains cable is damaged; or if the control panel, work top or plinth area is damaged such that the inside of the appliance is freely accessible. • Switch off the washing machine before cleaning, maintenance and servicing.
Description of the appliance Detergent dispenser drawer Control panel Rating plate (behind door) Three screw feet (height adjustable); rear left: Automatic foot Plinth flap/ Drain pump Control panel Programme knob and On/Off dial Display Function keys START/PAUSE key What is shown in the display Information field, shows the current settings COTTON Cycle end at Temperature 12.45 Current time 15.
Program overview 1800/1600/1400 1200/1000/ 800/600/400 0 • • • • • • • COTTON 6kg2 • • • •3) •3) • • • • • LINEN/EASY-CARES 60°, 50°, 40°, 30°, Cold cycle 6kg2) or • 3kg • •4) • •3) •3) • • • • • 40 - 60 MIX 6kg2) • • • • • • • • DELICATE 40°, 30°, Cold cycle 3kg • • • • WOOL/ (HANDWASH) 40°, 30°, Cold cycle 2kg • • • • SILK/ 1kg • • • • (HANDWASH) • • • •4) • • RINSE HOLD DELAY START • VERY SHORT 6kg2) • SHORT NIGHT CYCLE ENERGY SAVING 1)
Care symbols1) Use/Features Energy-saving program at 60 °C for lightly to normally soiled whites/coloureds made of cotton/linen. MO Energy-saving program at 95 °C for normally to heavily soiled whites/coloureds made of cotton/linen. O General program for whites/coloureds made of cotton/linen as well as for easy-care mixed fibres and synthetics. The program is automatically adjusted to the different fabric types and load sizes. If loading only with easy-care washing, do not load more than 3kg.
Prior to using for the first time Switching on the appliance for the first time - setting the language 3 The display is set to English as standard in the factory. Important: If the display does not show the menu for setting the language when the appliance is switched on, the appliance has been switched on before. If this happens, please see the section “Setup/Language”. To switch on the appliance, turn the program knob to any program, e. g. COTTON.
Setting the time So that the time and the end of the program are correctly displayed, please check the display and set the current time if necessary. To do this, please see the section “Setup/Clock”. Carrying out a wash program prior to first use In order to remove any residues from the drum and water container which may have been left during manufacturing, perform the first wash cycle without any washing in the machine. Program: LINEN/EASYCARES 60 °C, option TIME SAVING: VERY SHORT, use approx.
Running a washing cycle Opening the door/loading washing 1. To open the door: pull the door by the handle. 2. Unfold washing and load it loosely into the machine. Mix large and small items. Important: Do not get any washing caught between the door and the rubber seal. 3. Push the door shut firmly. Door catch must audibly click shut. Current load display 3 3 If settings are not undertak- Max. load: kg 7.00 en for several seconds during ¢¢££££££££ kg 1.
Adding detergent/additives Important: Use only detergents and additives that are suitable for use in domestic washing machines. 1 For USA and Canada only! Important! Only LOW-SUDSING detergent suitable for a front-loading washing machine can be used in this machine. This machine can heat the water up to 95 degrees celsius, or 200 degrees fahrenheit, and care should be taken to ensure that the correct washing powder is used. If you have any doubt, check with your dealer or the distributor.
Washing powder/tablets for the main wash If you are using water softener and need the right-hand compartment for the pre-wash detergent, add the water softener to the main wash detergent in the left-hand compartment. Softeners, wash-care products to preserve the shape of garments, starch Do not fill the compartment beyond the MAX mark. Dilute thick liquid concentrates according to the manufacturer’s instructions before putting them into the drawer. Dissolve powder starches.
Changing the temperature Press the TEMP. key repeatedly until the desired temperature is displayed. 12.45 LINEN/EASY CARE Cycle end at 14.37 50C1800 aýýýýýaýaýaýaýaýaýaýaýa TEMP. RPM OPTIONS OK TIME Changing spin speed/selecting rinse hold 3 Press the RPM key repeatedly, until the desired spin speed or RINSE HOLD is displayed. LINEN/EASY CARE Cycle end at 12.45 14.37 50C 800 aýýýýýaýaýaýaýaýaýaýaýa With spin speed “0” the last TEMP.
STAIN For heavily soiled and stained washing. In-wash stain treatment products are washed in at the optimum time as the program progresses. NIGHT CYCLE The washing is left to soak in the final rinse water. There is no final spin and no intermediate spin. Because of this the program runs very quietly. NIGHT CYCLE is therefore particularly suitable if you want to wash at night. SETUP 3 The special functions that can be set under Setup remain permanently stored in the appliance, e. g., time, language, etc.
3. Press the OPTIONS key repeatedly, until your program set appears again. The display shows the symbol for the selected option. 12.45 14.56 LINEN/EASY CARE Cycle end at 50C 800 aýýýýýVýaýaýaýaýaýaýaýa TEMP. RPM OPTIONS OK TIME Setting times Shortened cycles and the delay of the start time can be set for a wash cycle that has already been selected. Press the TIME key. The display shows the symbols for TIME SAVING and DELAY START.
3 4. To change from SHORT to VERY SHORT, press the TIME key again. 12.45 14.12 Time saving VERY SHORT aýýýýýaýaýaýaýaýaýaýK_ýT You can change between TEMP. RPM OPTIONS OK TIME NORMAL, SHORT, and VERY SHORT using the TIME key. 5. Press the OK key to confirm the selection. The display changes to the symbol for DELAY START, i.e. DELAY START can now be set. 6. Press the TIME key, if no Delay Start is to be set. The display shows the TIME SAVING symbol as well as the time for the end of the cycle.
Starting a program 3 1. Check that the water tap is open. 2. Press the START/PAUSE key. The program is started or it starts after the time delay set has elapsed. If after pressing the START/PAUSE key the display shows “Door not Closed”, the door has not been shut properly. Push the door firmly closed and press the START/PAUSE key again. Program progress 3 The display indicates the stage of the program that is currently being performed as well as the time of the end of the program. 12.45 14.
Washing cycle complete/Removing the washing At the end of the cycle a long acoustic signal sounds 3 times (when the SOUND setting is NORMAL or LOW) and the messages “Cycle ended” and “Door openable” appear alternately in the display. 1. Open the door and remove the washing. 2. Turn the programme knob to OFF. 3. Turn off the tap. 4. After the wash, pull out the detergent dispenser drawer slightly to allow it to dry. Leave the door slightly open to air the inside of the washing machine.
Setting the Memory Example: Program position 12.45 LINEN/EASY CARE MEMORY 1 is to be given the 14.37 following program combina- Cycle end at 40C 800 aýýýýýVýaýaýaýaýaýaýaýa tion: LINEN/EASYCARES 40 °C, 800 rpm, with TEMP. OPTIONS OK TIME RPM PREWASH. 1. Turn the program knob to LINEN/EASY-CARES. 2. Press the TEMP. key repeatedly, until 40 °C appears in the display. 3. Press the RPM key repeatedly, until 800 appears in the display. 4. Using the OPTION key set PREWASH and press the OK key.
Volume The volume of the acoustic signal can be selected. 1. Turn the program knob to any program and press the OPTIONS key repeatedly until the SETUP symbol flashes. 2. Press the OK key. 3. Press the OPTIONS key repeatedly, until VOLUME is shown in the display. 4. Press the OK key. 5. Press the OPTIONS key reSound peatedly until the desired NORMAL volume (NORMAL, LOW, NO aýýýýýaýaýaýaýBýaýaýaýa SOUND) is shown in the display. TEMP. RPM OPTIONS OK TIME 6. Press the OK key to confirm the setting.
Language 1. Turn the program knob to any program and press the OPTIONS key repeatedly until the SETUP symbol flashes. 2. Press the OK key. 3. Press the OPTIONS key repeatedly, until the display shows LANGUAGE. 4. Press the OK key. 5. Press the OPTIONS key reSprache peatedly, until the desired language appears in the dis- DEUTSCH aýýýýýaýaýaýaýBýaýaýaýa play, e. g. DEUTSCH. 6. Press the OK key. The display TEMP. OPTIONS OK TIME RPM changes to the next special function. 7.
Contrast and brightness 1. Turn the program knob to any program and press the OPTIONS key repeatedly until the SETUP symbol flashes. 2. Press the OK key. 3. Press the OPTIONS key repeatedly, until the display shows CONTRAST or or BRIGHTNESS. 4. Press the OK key. Contrast 5. Using the OPTIONS key set ƒ………………™………………‡ the desired setting. With aýýýýýaýaýaýaýBýaýaýaýa each press of the key or if the key is kept pressed down, TEMP.
1 Warning! The knob must not be sunk-in after being set, otherwise the child safety device is not active. The knob must stand out as shown in the illustration. Releasing the child safety device: Turn the knob anti-clockwise as far as it will go. Cleaning and maintenance Important! Do not use furniture care products or aggressive cleaners to clean the appliance. Wipe control panel and body with a damp cloth.
Washing drum Rust deposits in the drum may occur due to rusting foreign bodies in the washing or tap water containing iron. Important! Do not clean the drum with acidic descaling agents, scouring agents containing chlorine or iron or steel wool. 1. Remove any rust deposits on the drum with a cleaning agent for stainless steel. 2. Run a washing cycle without any washing to clean off any cleaning agent residues. Program: LINEN/EASY-CARES 60°, option TIME SAVING: VERY SHORT, add approx.
Problem Possible cause Mains plug not plugged in or fuse not working. Remedy Plug in mains plug. Check fuse. Close door - there should be Washing machine does not Door not closed properly. an audible click. work. START/PAUSE key was Press START/PAUSE key for not pressed for long longer. enough. The door cannot be closed. Child safety device engaged. Release the child safety device. Display shows: ”Selection error”. The selected function cannot be combined with other programme settings.
Problem Display shows: “Excess Detergent” Display shows: – “No drain - check/drain hose/filter” or – “Pump Blocked” Possible cause Remedy Probably too much detergent has been used. Dose detergent exactly as instructed by manufacturer. Kink in drain hose. Remove kink. Maximum pumping height of 1m exceeded. Please contact your Service Force Centre Drain pump is blocked. Switch off the appliance. Pull out mains plug. Clean the drain pump. Remove foreign bodies from the pump housing.
If the wash results are not satisfactory Washing is grey and scale is being deposited in the drum • Too little detergent is being used. • The right detergent was not used. • Special soiling was not pre-treated. • Programme or temperature was not correctly set. There are grey stains on the washing. • Washing soiled with ointment, grease or oil was washed with too little detergent. • It was washed at too low a temperature.
Carrying out an emergency drain 1 Warning! Before emergency draining, switch off the washing machine and remove the mains plug from the socket. Warning! The water that comes out of the emergency drain hose may be hot. There is a risk of scalding. Let the water cool before performing an emergency drain. 1. Open the plinth flap and remove it. 2. Take out the emergency drain hose. 3. Place a shallow container underneath it.
Drain pump 1 The drain pump is maintenance-free. It is only necessary to open the pump cover if there is a malfunction and water is no longer being pumped out, e. g. if the pump wheel is blocked. Please make sure before loading the washing that there are no foreign bodies in the pockets or caught between the washing. Paperclips, nails, etc. that may have got into the washing machine with the washing remain in the pump housing (foreign body trap that protects the pump wheel).
Disposal 2 2 Packaging material The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at the community waste disposal facilities. Old appliance W 1 The symbol on the product or on its packaging indicates that this product may not be treated as household waste.
Technical data 5 This appliance conforms with the following EU Directives: – 73/23/EEC dated 19.02.1973 Low Voltage Directive – 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending Directive 92/31/EEC – 93/68/EEC dated 22.07.1993 CE Marking Directive Height x Width x Depth 850 x 598 x 640 mm Depth when door is open 1017 mm Height adjustment approx. +10/-5mm Load (depending on programme) Max. 6kg Area of use Domestic Drum spin speed see programme overview Water pressure 0.
Installation and connection instructions 1 Safety information for the installation • This washing machine cannot be built-in. • Before using for the first time, check the appliance for damage sustained while it was being transported. Do not under any circumstances connect an appliance that is damaged. In the case of damage, please contact your supplier. • Before using for the first time, all parts of the transport lock must be removed.
• Do not lay the appliance on its front nor on its right side (as seen from the front). Electrical components may get wet. • Never transport the appliance without its transport lock. Only remove the transport lock when the appliance is in its place of installation. Transporting the appliance without its transport lock can lead to damage to the appliance. • Never lift the appliance by the door when it is open nor by the plinth.
3. With a suitable spanner unscrew and remove the central rear bolt A. Slide out the relevant plastic spacer. 4. Unscrew and remove the two large rear bolts B and the six smaller bolts C. 5. Remove the bracket D. 6. Refit the six smaller bolts C. Downloaded From WashingMachine-Manual.
7. Open the porthole and remove the polystyrene block fitted with the adhesive tape on the door seal. 8. Fill the smaller upper hole and the two large ones with the corresponding plastic plug caps supplied in the bag containing the instruction booklet. Important! All the different plug caps are supplied with the appliance in the plastic bag containing the instruction booklet. Connect the water inlet hose as described under the paragraph “Water inlet”.
Making the appliance level 3 Automatic foot: The rear foot on the left-hand side of your washing machine is built as a shock absorbing foot, which is why the appliance gives in the back left-hand corner if put under load. The automatic foot guarantees that the appliance does not move even at high spin speeds. Basically the automatic foot does not need to be set. The four feet of the appliance are pre-adjusted.
Water inlet Attention! • An inlet hose is supplied and can been found inside the machine drum. • Do not use the hose from your previous machine to connect to the water supply. • This appliance must not be connected to the hot water system. 1. Open the porthole and extract the inlet hose. 2. Connect the hose with the angled connection to the machine. Important! Do not place the inlet hose downwards. Angle the hose to the left or right depending on the position of your water tap. 3.
Water drainage The maximum permitted difference between the height of the surface on which the appliance is installed and the water outlet is 1 metre. Only original hoses may be used to extend hoses. (A maximum of 3 m laid on the floor and then 80 cm vertically). The Customer Care Department stocks outlet hoses of different lengths. Draining water into a sink outlet Secure the outlet/sink outlet joint with a hose band clip (available from your dealer).
Guarantee/Customer Service Weitere Kundendienststellen im Ausland In diesen Ländern gelten die Garantiebedingungen der örtlichen Partner. Diese können dort eingesehen werden. Further after-sales service agencies overseas In these countries our AEG-Electrolux agents’ own guarantee conditions are applicable. Please obtain further details direct. Autres agences étrangères assurant le service après-vente Dans ces pays, les conditions de garantie des concessionnaires de la région sont valables.
U.A.E. Abu Dhabi Universal Trading Company P.O. Box 43 99 Tel.: 6335331 Service Center 6733974 Jordan Jordan Household Supply Co. Ltd. P.O. Box 3/68 Amman/Tel.: 69 70 50 Malta ITC International Trading Company White House Building Mountbatte Street Blata L-Bajda/Tel.: 220644 Egypt Middle East Commercial Center 4 Salah El Dein St. - 2nd floor Heliopolis, Kairo Egypt Tel.: 2024181719 Canada EURO-LINE Appliances 2150 Winston PARK Drive 20 Oakville, Ontario L6H 5V1 Tel.
Israel Evis Ltd. Tadiran-Ampa Service 10 Gibonay Israel Street New Industrial Zone Netanya, 42504 Israel Malaysia Arzbergh Engineering No. 49A/B, Jalan Petaling Utama 7 4600 Petaling Jaya Tel.: 3 795 1084 Fax: 3 795 1082 Saudi Arabia Awad Badi Nahas Est Shara Siteen Jeddah 21463 Phone: 6646583 Alia Trading Co Mecca Road Riyadh 11491 Phone 4645977 Japan Electrolux Japan Ltd. Domestic Appliances Department Maruzen Showa Warehouse Building Tookai 4-5-12, Ota-ku 143-006 Tokyo Tel.
European Guarantee This appliance is guaranteed by Electrolux in each of the countries listed at the back of this user manual, for the period specified in the appliance guarantee or otherwise by law.
www.electrolux.com p t b Albania +35 5 4 261 450 Rr. Pjeter Bogdani Nr. 7 Tirane Belgique/België/ Belgien +32 2 363 04 44 Bergensesteenweg 719, 1502 Lembeek Èeská republika +420 2 61 12 61 12 Budìjovická 3, Praha 4, 140 21 Danmark +45 70 11 74 00 Sjællandsgade 2, 7000 Fredericia Deutschland +49 180 32 26 622 Muggenhofer Str. 135, 90429 Nürnberg Eesti +37 2 66 50 030 Mustamäe tee 24, 10621 Tallinn España +34 902 11 63 88 Carretera M-300, Km.
p t b Slovenija +38 61 24 25 731 Electrolux Ljubljana d.o.o. Gerbiceva 98, 1000 Ljubljana Slovensko +421 2 43 33 43 22 Electrolux Slovakia s.r.o., Electrolux Domáce spotrebièe SK, Seberíniho 1, 821 03 Bratislava Suomi www.electrolux.
Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions (section “What to do if…”). If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service partners. In order to be able to assist you quickly, we require the following information: – Model description – Product number (PNC) – Serial number (S No.
www.electrolux.com 132 973 620-00-032207-01 Subject to change without notice Downloaded From WashingMachine-Manual.
