HK764070FB User manual Ceramic glass hob
Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance. We wish you much joy with your new appliance.
Installation 3 • Set the cooking zones to "off" after each use. • Risk of burns! Do not put cutlery or saucepan lids on the cooking surface, as they can become hot. WARNING! Fire danger! Overheated fats and oils can ignite very quickly. Correct operation • • • • Always monitor the appliance during operation. Only use the appliance for domestic cooking tasks! Do not use the appliance as a work or a storage surface.
Installation Safety instructions WARNING! You must read these! Make sure that the appliance is not damaged because of transportation. Do not connect a damaged appliance. If it is necessary, speak to the supplier. Only an authorised service technician can install, connect or repair this appliance. Use only original spare parts. Only use built-in appliances after you assemble the appliance into correct built-in units and work surfaces that align to the standards.
Installation Assembly min. 50 mm min. 500 mm min. 50 mm R 5mm = 600mm 490+1mm 680+1mm = min. 25 mm min. 20 mm min.
Description of the appliance Description of the appliance Cooking surface layout 1 2 145 265 mm 120/175/210 mm 180 mm 6 1 2 3 4 5 6 170 mm mm 5 4 Single cooking zone 1200 W Oval zone 1400/2200 W Control panel Single cooking zone 1800 W Triple cooking zone 800/1600/2300 W Control panel 3 Control panel layout 10 11 12 9 8 1 7 2 3 6 5 4 Use the sensor fields to operate the appliance.
Operating the appliance sensor field 7 function selects the cooking zone 8 9 the timer display shows the time in minutes 10 cooking zones' indicators of timer shows for which zone you set the time 11 a lock with an indicator starts and stops the key lock or child lock 12 with an indicator starts and stops STOP+GO Heat setting displays Displays show which functions operate Display Description The cooking zone is off The cooking zone operates - Keep Warm The automatic heat-up function is on
Operating the appliance Automatic Switch Off times Heat setting - - - Stops after 6 hours 5 hours 4 hours 1.5 hours The heat setting Touch the control bar at the necessary heat setting. Change up or down, if it is necessary. Do not release before you have a correct heat setting. / Switching the outer rings on and off You can match the effective heating surface to the size of the cookware. . The indicator comes on.
Operating the appliance 9 • Selection of the cooking zone: touch again and again until the indicator of a necessary cooking zone comes on. • Starting the Count Down Timer: touch of the timer to set the time ( 00 - 99 minutes). When the indicator of the cooking zone flashes slower, the time counts down. • Checking the remaining time: select the cooking zone with . The indicator of the cooking zone flashes faster. Display shows the remaining time.
Helpful hints and tips The child safety device This function prevents an accidental operation of the hob. Starting the child safety device • Start the hob with . Do not set the heat settings . • Touch for 4 seconds. The symbol comes on. • Stop the hob with . Switching off the child safety device • Start the hob with . Do not set the heat settings . Touch for 4 seconds. The symbol comes on. • Stop the hob with . Overriding the child safety device for one cooking session • Start the hob with .
Care and cleaning 11 Öko Timer (Eco Timer) To save the energy, the heater of the cooking zone switches itself off earlier than count down timer signal. The heating time reduction depends on cooking level and cooking time. Examples of cooking applications The data in the table is for guidance only.
What to do if... Scratches or dark stains on the glass ceramic have no effect on how the appliance operates. Removing the dirt: 1. – Remove immediately: melting plastic, plastic foil, and food containing sugar. Use a special glass ceramic scraper. Put the scraper on the glass ceramic surface at an acute angle and slide the blade on the surface. – Stop the appliance and let it cool down before you clean: limescale rings, water rings, fat stains, shiny metallic discolorations.
Environment concerns 13 If you tried the above solutions and cannot repair the problem, speak to your dealer or the Customer Care Department. Give the data from the rating plate, three-digit-letter code for the glass ceramic (it is in the corner of the cooking surface) and an error message that comes on. If you operated the appliance incorrectly, the servicing by a customer service technician or dealer will not be free of charge, even during the warranty period.
www.electrolux.com 892932242-A-092009 To buy accessories, consumables and spare parts at our online shop please visit: www.aeg-electrolux.co.