FM4863K-AN User manual Induction wok
Dear Customer Thank you for choosing one of our high-quality products. With this appliance you will experience the perfect combination of functional design and cutting edge technology. Convince yourself that our appliances are engineered to deliver the best performance and control - indeed we are setting the highest standards of excellence. In addition to this you find environmental and energy saving aspects as an integral part of our products.
Contents 3 Contents Operating Instructions 4 Safety instructions 4 Description of the Appliance Cooking surface layout Control panel layout Touch Control sensor fields Displays Residual heat indicator Accessories Operating the appliance Switching the appliance on and off Setting the heat setting Switching the power function on and off Using the child safety device Using the timer Automatic switch off Tips for cooking with the wok Cookware for the induction wok Methods of preparation in the wok Cleanin
Operating Instructions Operating Instructions 1 Safety instructions Please comply with these instructions. If you do not, any damage resulting is not covered by the warranty. Correct use • This appliance is not intended for use by children or other persons whose physical, sensory or mental capabilities or lack of experience and knowledge prevents them from using the appliance safely without supervision or instruction by a responsible person to ensure that they can use the appliance safely.
Safety instructions 5 Safety during use • Overheated fats and oils can ignite very quickly. Warning! Fire hazard! • Risk of burns! Fat or oil added to a pan which has already been heated ignites very quickly and can spit. • There is the risk of burns from the appliance if used carelessly. • Remove stickers and film from the glass ceramic. • Cables from electrical appliances must not touch the hot surface of the appliance or hot cookware. • Switch cooking zone off after every use.
Description of the Appliance Description of the Appliance Cooking surface layout m m 00 3 Wok niche 2300W with power function 3200W Frontline strip Control panel Control panel layout Child lock pilot light Timer indicator Heat setting indicator Heat setting 6 / power function Child lock Heat setting indicator On/Off pilot light Timer Timer selection On/Off Heat setting selection
Description of the Appliance 7 Touch Control sensor fields The appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields. Touch the sensor fields from above, without covering other sensor fields.
Description of the Appliance Displays Display - Keep warm setting Heat settings Fault Pan detection Residual heat Child safety device Power Automatic switch off Description Cooking zone is switched off Keep warm setting is set Heat setting is set Malfunction has occurred Cookware is unsuitable or too small or no cookware has been placed on the cooking zone Cooking zone is still hot Child safety device is engaged Power function is switched on Switch off is active.
Operating the appliance 9 Operating the appliance 3 Only use a wok pan that is suited to this appliance. Switching the appliance on and off To switch on To switch off 3 Control panel touch for 2 seconds touch for 2 seconds Display / / none Pilot light lights up goes out After switching on, within approx. 10 seconds a heat setting or a function must be set, otherwise the appliance automatically switches itself off.
Operating the appliance Using the child safety device The child safety device prevents unintentional use of the appliance. Switching on the child safety device Step Control panel Display/Signal 1. Switch on appliance. (Do not set a heat setting.) 2. Touch for 4 seconds Appliance switches off. The child safety device is switched on Deactivating the child safety device Step Control panel Display/Signal 1. Switch appliance on 2. Touch for 4 seconds 0 lights up Appliance switches off.
Operating the appliance 11 Using the timer Two functions are possible: Function Safety cut-out Countdown timer 3 Condition Outcome after time has elapsed When a heat setting is set acoustic signal 0 lights up Cooking zone switches off When cooking zones are acoustic signal not used 0 lights up If a heat setting is set in addition to a countdown timer that is set, the countdown timer becomes a safety cut-out. The cooking zone is switched off after the time set has elapsed.
Operating the appliance Changing the time Step Control panel 1. Touch 2. Touch or The pilot light lights up. The time is set. The time counts down to 0. Display Pilot light flashes 01 to 99 minutes Switching off the acoustic signal Step Control panel field 1. Touch Acoustic signal stops. Acoustic signal Acoustic signal to acknowledge.
Operating the appliance 13 Automatic switch off Cooking surface • If after switching on the cooking surface, a heat setting is not set within approx. 10 seconds, the cooking surface automatically switches itself off. • If the cooking zone is switched off, the cooking surface automatically switches itself off after approx. 10 seconds. Induction cooking zones • In the case of overheating (e.g. when a saucepan boils dry) the cooking zone automatically switches itself off. is displayed.
Tips for cooking with the wok Tips for cooking with the wok 1 3 3 The induction wok is eminently suitable for preparing “á la minute” dishes, in particular Chinese specialities. The food is continuously turned during the short frying time. The induction heating system means that in the wok you can cook extremely quickly and at high heat. As a result meat and fish remain succulent and vegetables retain colour, taste and vitamins. Take care! Risks of burns from overheated fats and oils.
Tips for cooking with the wok 15 Cookware for the induction wok 3 1 Suitability test Cookware is suitable for induction cooking, if … • ... a little water on an induction cooking zone set to heat setting 9 is heated very quickly. • ... a magnet sticks to the bottom of the cookware. The cookware can make noises while working on induction cooking zones. These noises are not a fault in the appliance and do not affect operation in any way.
Tips for cooking with the wok Methods of preparation in the wok Stir frying • Wok is swirled with oil. • Ingredients cut into small pieces, including sauces and seasonings, are quickly fried over a high heat while continuously being stirred. • Due to the extremely short cooking time the ingredients should be ready before you start cooking. • Start with the ingredients with the longest cooking time. • Very healthy method of preparation.
Cleaning and Care 17 Cleaning and Care 1 1 Take care! Risk of burns from residual heat. Warning! Sharp objects and abrasive cleaning materials will damage the appliance. Clean with water and washing up liquid. 1 Warning! Residues from cleaning agents will damage the appliance. Remove residues with water and washing up liquid. Cleaning the appliance after each use 1. Wipe the appliance with a damp cloth and a little washing up liquid. 2. Rub the appliance dry using a clean cloth. Removing deposits 1.
What to do if … What to do if … Problem The cooking zone cannot be switched on or is not operating Possible cause Remedy More than 10 seconds have Switch the appliance on again. passed since the appliance was switched on The child safety device is switched on Deactivate child safety device (See the section “Child safety device”) Several sensor fields were touched at the same time Only touch one sensor field Automatic switch off has been Remove any objects (pan, triggered cloths, etc.
Disposal 19 Disposal 2 Packaging material The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at the community waste disposal facilities. 2 Old appliance W The symbol on the product or on its packaging indicates that this product may not be treated as household waste.
Installation Instructions Installation Instructions 1 z z Safety instructions Warning! This must be read! The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.) Installation may only be carried out by a qualified electrician. The minimum distances to other appliances and units are to be observed.
Assembly Assembly 21
Assembly
Installing more than one Frontline hob 23 Installing more than one Frontline hob 3 Additional parts: cross bar(s), heat resistant silicon, rubber block, shaving blade. Only use special heat-resistant silicon. Cut-out section Distance from the wall: at least 50 mm Depth:490 mm Width: The widths of all appliances to be built-in are added together, minus 20 mm (see also “Overview of all appliance widths”) Example: Installing more than one appliance 1.
Installing more than one Frontline hob 5. Place first appliance in the cut-out. Lay connecting cross bar in the cut-out and push up halfway against the appliance. 6. Put silicon on the appliance corners that will touch one another. Put silicon on the end of the cross bar. 7. Loosely screw in fixing plates / retaining grips from below on the worktop and on the connecting cross bar.
Installing more than one Frontline hob 25 8. Place Frontline strips on the appliances. Check that the Frontline strips are in line with one another. 9. 10. 11. 12. Tighten the fixing plate / retaining grip screws. Inject a line of silicon into the gap between the appliances. Dampen silicon line with a little soapy water. Press rubber block hard against the glass ceramic and draw it slowly along the gap. 13. 14. 15. 16. Leave silicon until the next day to harden.
Installing more than one Frontline hob Overview of all appliance widths 180 mm Worktop-mounted cooker hood 360 mm Glass ceramic cooking surface with 2 radiation cooking zones Glass ceramic cooking surface with 2 induction cooking zones Gas hob with 2 burners Grill Grill/Deep fat fryer Wok 580 mm Glass ceramic cooking surface with 4 radiation cooking zones Gas hob with 4 burners 720 mm Glass ceramic cooking surface with 4 radiation cooking zones Glass ceramic cooking surface with 4 induction cooking zon
Rating Plate 941 177 710 AEG-ELECTROLUX 3,2 kW 220-240 V 50/60 59 WOK 01 AG FM4863K-AN
Guarantee/Customer Service Guarantee/Customer Service Standard guarantee conditions We, AEG-Electrolux, undertake that if within 12 months of the date of the purchase this AEG-Electrolux appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour, materials or carriage on condition that: • The appliance has been correctly installed and used only on the electricity supply stated on
Guarantee/Customer Service 29 European Guarantee This appliance is guaranteed by Electrolux in each of the countries listed at the back of this user manual, for the period specified in the appliance guarantee or otherwise by law.
Guarantee/Customer Service p t b Nederland +31 17 24 68 300 Vennootsweg 1, 2404 CG Alphen aan den Rijn Norge +47 81 5 30 222 Risløkkvn. 2 , 0508 Oslo Österreich +43 18 66 400 Herziggasse 9, 1230 Wien Polska +48 22 43 47 300 ul. Kolejowa 5/7, Warszawa Portugal +35 12 14 40 39 39 Quinta da Fonte - Edificio Gonçalves Zarco - Q 35 2774 - 518 Paço de Arcos Romania +40 21 451 20 30 Str.
Service and Spare Parts 31 Service and Spare Parts If the event of your appliance requiring service, or if you wish to purchase spare parts, please contact Service Force by telephoning: 0870 5 929 929 Your telephone call will be automatically routed to the Service Force Centre covering your post code area. For the address of your local Service Force Centre and further information about Service Force, please visit the website at www. serviceforce.co.
374 477 613-M-200907-02 Subject to change without notice www.electrolux.
