78031KF-MN User manual Ceramic glass induction hob
Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance. We wish you much joy with your new appliance. Contents Operating the appliance 2 What to do if ...
Safety Information 3 • To avoid small children and pets unintentionally switching the appliance on, we recommend activation of the child safety device. General safety • The appliance may only be installed and connected by trained, registered service engineers. • Built-in appliances may only be used after they have built in to suitable built-in units and work surfaces that meet standards.
Description of the appliance Description of the appliance Cooking surface layout 6 1 2 5 4 3 1 Induction cooking zone 2300W, with power function 3200W 2 Induction cooking zone 2300W, with power function 3200W 3 Control panel 4 Induction cooking zone 2300W, with power function 3200W 5 Induction cooking zone 2300W, with power function 3200W 6 Control panel The cooking surface is divided into four cooking zones.
Description of the appliance 5 Control panel layout 1 2 3 4 5 6 7 8 9 Child lock with a pilot light Stop+Go with a pilot light On/Off with indicator Heat setting indicator Power function Heat setting selection Timer Timer display Cooking zone indicators - Timer function 1 9 2 8 7 3 4 5 6 Touch Control sensor fields The appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays and acoustic signals.
Operating the appliance Displays Display Description The cooking zone is switched off + digit Keep Warm settings Keep Warm / STOP+GO function is switched on Heat settings To set heat settings Auto Warm-up The Auto Warm-up function is switched on Fault Malfunction has occurred Pan detection Cookware is unsuitable or too small or no cookware has been placed on the cooking zone Residual heat Cooking zone is still hot Child safety device Lock/Child safety device is set Power Power function
Operating the appliance Control panel 7 Display To set the heat setting Touch the desired heat setting, if necessary, correct up or down Switch off Touch / to Locking/unlocking the control panel The control panel, with the exception of the “On/Off” sensor field, can be locked at any time in order to prevent the settings being changed e.g. by wiping over the panel with a cloth.
Operating the appliance Heat setting Length of the automatic warm up [min:sec] 0:12 1:21 3:07 4:24 5:51 8:12 10:12 10:36 2:01 2:01 2:28 2:52 --- Using the child safety device The child safety device prevents unintentional use of the appliance. Switching on the child safety device Step 1. 2. Control panel Display/Signal Switch on appliance. Do not set a heat setting. Touch for 4 seconds The child safety device is switched on. Switching off the child safety device Step 1. 2. 3.
Operating the appliance Step Control panel 1. 2. 9 Display/Signal Switch appliance on Touch for 4 seconds lights up Until the appliance is next switched off, it can used as normal. After switching off the appliance, the child safety device is active again. After overriding the child safety device, a heat setting or a function must be set within approx. 10 seconds, otherwise the appliance automatically switches itself off.
Operating the appliance Function Condition Outcome after the time has elapsed Automatic cut-out a heat setting is set acoustic signal 00 flashes Cooking zone switches off Countdown timer cooking zones not in use acoustic signal 00 flashes If just one countdown value is set you can change it only when the appliance is switched on. If a heat setting is set on this cooking zone in addition to a countdown timer, the cooking zone is switched off after the time set has elapsed.
Operating the appliance Step 2. Control panel 11 Display The time remaining counts backwards to 00 . Touch The pilot light goes out. The Timer function for the selected cooking zone is switched off. Changing the time Step 1. 2. Control panel Select a cooking zone Touch or Display Pilot light of the selected cooking zone flashes more quickly Remaining time is displayed 01 to 99 minutes After a few seconds the pilot light flashes more slowly. The time is set. The time counts down.
Tips on cooking and frying • If cookware that is not suitable is used, lights up in the display and after 2 minutes the display for the cooking zone switches itself off. • If one of the cooking zones is not switched off after a certain time, or if the heat setting is not modified, the relevant cooking zone switches off automatically. is displayed. Before being used again, the cooking zone must be set to . Heat setting Switches off after 1-3 6 hours 4-7 5 hours 8-9 4 hours 10 - 14 1.
Tips on cooking and frying 13 a minimum diameter depending on the size of the cooking zone. Cookware with a bottom with a diameter of less than 12cm is not suitable. Tips on energy saving Place cookware on the cooking zone before it is switched on. If possible, always place a lid on the cookware. Examples of cooking applications The information given in the following table is for guidance only.
Cleaning and care Heat setting Cooking process suitable for Cook time Tips/Hints 12-13 Heavy frying Hash browns, loin steaks, steaks, Flädle (pancakes for garnishing soup) 5-15 mins. per pan Turn halfway through cooking 14 Boiling Searing Deep frying Boiling large quantities of water, cooking pasta, searing meat (goulash, pot roast), deep frying chips The power function is suitable for heating large quantities of liquid.
What to do if ... Problem/Display Possible Cause 15 Remedy Automatic switch-off has been Remove any objects (pans, etc.) triggered that are lying on the control panel.
Disposal If the appliance has been operated incorrectly, the engineer's visit will be chargeable, even during the warranty period. Operating noises Depending on the material and the processing of the base, the following noises may occur when using induction cooking zones.
Safety information 17 Installation instructions Safety information WARNING! This must be read! The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.) Installation may only be carried out by a qualified electrician. The minimum distances to other appliances and units are to be observed.
Safety information Assembly min. 500 min. 50 min. 5 600 = 680 +1 490 +1 = min. 5 min. 25 min. 5 min. 20 R5 min. 20 min. 5 min. 38 min.
Service 19 Rating Plate 78031KF-MN 55 GDD D4 AU 949 593 062 AEG-ELECTROLUX Service In the event of technical faults, please first check whether you can remedy the problem yourself with the help of the operating instructions (section “What to do if…”). If you were not able to remedy the problem yourself, please contact the Customer Care Department or one of our service partners.
www.electrolux.com 892930318-B-092008 www.aeg-electrolux.co.