AEE Unmanned Aircraft System Professional Leading The throttle lever of the remote control is the power lever to control the propeller speed, which can control the rise and fall of the drone. The push of the throttle lever should be gentle to avoid large fluctuations. When the left joystick is centered, the altitude and heading of the aircraft remain unchanged.
AEE Unmanned Aircraft System Professional Leading 5.
AEE Unmanned Aircraft System Professional Leading Information bar switch Open and hide “flight clock” and “coordinate of latitude and longitude” Flight clock Start counting when drone takes off and record the flight period GPS/RTK Number of satellites Display current quantity of satellite and current flight mode of aircraft; for details, please refer to 5.5.
AEE Unmanned Aircraft System Professional Leading DAT9B:Quickly control the gimbal angle and zoom of the cradle head, as shown in the figure below: DATF:Shortcut controls for DATF Pitch Angle and Camera controls,as shown in the figure below: - 32 -
AEE Unmanned Aircraft System Professional Leading 5.6.1.2 Spotlight shortcut Control the spotlight on/flash/off, control the cradle head pitch, as shown in the figure below: 5.6.1.
AEE Unmanned Aircraft System Professional Leading DAR6 SUPER THUNDERHORN shortcut, as shown in the figure below: 5.6.1.
AEE Unmanned Aircraft System Professional Leading 5.7 Illustration of setting interface Short press set once to enter the setting interface. 5.7.1 Camera parameters Under the parameter setting options: 1. Relevant parameters of the camera are self-adaptive and unchangeable. 2. Camera: Check if camera is recording. 3. Background: Turn on/off aircraft heading angle and gesture reference line; this function is on by default. 4.
AEE Unmanned Aircraft System Professional Leading 5.7.2 Drone settings Under the functional parameter options, relevant parameters of the drone can be set: 1. One-button take-off altitude: The min. altitude is 16ft, while the max. altitude is 393ft. 2. When first-level and second-level alarm reaches the set value, the remote control will have obvious prompt and buzzing sound. When battery level reaches the set value, the corresponding first-level and second-level alarm action will be triggered.
AEE Unmanned Aircraft System Professional Leading 5.7.4 Map Setting Under the functional parameter options, you can download the information such as map through WIFI. As shown below: 5.7.5 Firmware upgrade From time to time, please check with AEEUSA Office. From time to time, AEEUSA will make available new APK firmware software for improving the MACH6 user experience. Do not attempt to update your firmware until speaking directly with AEEUSA office at 877-414-7993.
AEE Unmanned Aircraft System Professional Leading 5.7.6 Version information Under the functional parameter options, you can view the software version information related to the aircraft, remote control, etc. As shown below: 5.7.7 Other information Under the option of this function parameter, you can modify the frequency band and unit.
AEE Unmanned Aircraft System Professional Leading 5.7.8 Picture processing Under the option of this function parameter, you can choose surveying and mapping camera, flight record, etc. (This function applies to surveying and mapping camera only). As shown below: 5.7.9 RTK Under the option of this function parameter, you can select RTK on/off, status, etc.
AEE Unmanned Aircraft System Professional Leading 5.7.10 RTK configuration and use of 4G network RTK Configuration can be used with RTK GNSS base station and with built in 4G Modem for direct connection via IP Address and separate subscription account to a provider via server access like ENTRIP. ( note separate subscription through service provider will be needed). As shown below: xxxxxxx xxxxxxxx xxx.xxx.xxx.
AEE Unmanned Aircraft System Professional Leading xxxxxxx xxxxxxxx xxx.xxx.xxx.xxx After login succeeds, wait for a few moments and high-accuracy positioning is entered when RTK is displayed on the icon. As shown below: xxxxxxx xxxxxxxx xxx.xxx.xxx.
AEE Unmanned Aircraft System Professional Leading 5.7.11 Battery information Under the option of this function parameter, you can view the information such as battery information and temperature of electronic temperature controller.
AEE Unmanned Aircraft System Professional Leading 5.
AEE Unmanned Aircraft System Professional Leading 5.8.1 Search Open search to search the area (network should be connected) and select flight. As shown below: 5.8.2 No-fly zone settings For Future Reference, the Mach 6 includes 4G Modem which will allow connection for future FAA ATC and Remote Identification compliance. Please check with AEEUSA.COM for updates as the FAA makes them available.
AEE Unmanned Aircraft System Professional Leading 5.8.3 Map type Select standard map, including the standard map and satellite. As shown in figure below: 5.8.4 Centering button Find the drone position quickly.
AEE Unmanned Aircraft System Professional Leading 5.8.5 Route list Establish route, edit route, etc.
AEE Unmanned Aircraft System Professional Leading 5.9 Route mission The first route mission flight should be established and edited. As shown in the figure below: 5.9.1 Edit route Once the route is established, enter the edit page and confirm the navigation points as required. Long press the flight position to generate the first navigation point, and the remaining navigation points can be set in the same manner of the first navigation point.
AEE Unmanned Aircraft System Professional Leading - 48 -
AEE Unmanned Aircraft System Professional Leading 5.9.2 Modify the way point When the whole navigation point is generated, if a certain navigation point is found to have a problem, click the suspicious navigation point, click the navigation point to turn red, and then the modification point, click the navigation point to turn red, and then the modification can be made, as shown below: 5.9.3 General settings of navigation points Click a certain navigation point to modify the data.
AEE Unmanned Aircraft System Professional Leading Once setting is done, modify the name for further searching. As shown in the figure below: Once setting is done, save the route.
AEE Unmanned Aircraft System Professional Leading 5.9.4 Upload route Select the targeted route mission or edited route mission to the UAV system for the flight of the route mission.
AEE Unmanned Aircraft System Professional Leading 5.9.5 Route execution After completing and uploading the route task to the UAV, perform the route function, and the aircraft will fly according to the route planning task edited. (The “Route execution” on route menu or “One-key route” on remote control can be used).
AEE Unmanned Aircraft System Professional Leading 5.9.6 Suspend/continue/resume route When pause function is used in the flight mission, the aircraft will suspend at current position; use this function again to start flight continuing or resuming. (Use “Pause task” on route menu or “Pause /resume route” on remote control). As shown in figure below: 5.9.7 Point selection operation: 5.9.7.
AEE Unmanned Aircraft System Professional Leading 5.9.7.2 In the point selection operation, the search function (network is required) can be carried out to know a certain place name. After input, the coordinates of the position will be obtained, and then click "Execute" again. The aircraft will perform flight.
AEE Unmanned Aircraft System Professional Leading 5.9.
AEE Unmanned Aircraft System Professional Leading 5.9.9 Clear the path Click the function button to clear the flight track of the aircraft on the map.
AEE Unmanned Aircraft System Professional Leading 5.9.10 Clear mark This function is available when the aircraft is mounted with surveying and mapping camera; the photography mark will occur only during execution of surveying and mapping task. During surveying and mapping task, click “Clear” mark to clear the photography mark on the route. As shown in figure below: 5.9.
AEE Unmanned Aircraft System Professional Leading 6. Flight 6.1 Take-off preparation 1. Check the battery level of the drone and the remote control, and charge them if the battery is low. 2. Check whether the propeller of the drone is tight and ensure that the blades are in the unfolded state. Make sure that the remote control mode switch is in the middle position and the remote control is displayed as "fixed point mode". Check whether satellite signal is normal. 3.
AEE Unmanned Aircraft System Professional Leading 1. When compass correction is entered, the tail yellow light will flicker, which means the drone has entered the correction status. 2. Rotate the drone horizontally for 360° according to the prompt, the tail light is normally on in red or green from yellow flickering (the indicator is red if satellite signal is not received, or green when satellite signal is received), or set the following item according to prompt of remote control. 3.
AEE Unmanned Aircraft System Professional Leading 6.4.2 Turn off motor Once the drone is landed, straighten the left joystick (throttle joystick), maintain it for 5s or pull the joystick to the lower left for 3s to stop the motor. As shown in figure below: Pull throttle down slowly and pull it to the lowest position when drone is landed Pull the joystick down and left simultaneously 6.5 Basic flight 1. Put the drone on flat and open place and the user faces the drone tail. 2.
AEE Unmanned Aircraft System Professional Leading 6.
AEE Unmanned Aircraft System Professional Leading which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help.
AEE Unmanned Aircraft System Professional Leading 6. For aircraft, it complies with RF specifications when the device used at 20cm from your body. For remote control, it complies with RF specifications when the device used at 0mm from your body. 7. Max power For aircraft: LTE(23.07dBm),2.4G(XXXdBm),5.8G(XXXdBm) For remote control: WLAN 2.4G(16.57dBm), WLAN 5.8G(11.70dBm),2.4G(18.82dBm),5.8G(12.87dBm) Declaration of Conformity SICHUAN AEE AVIATION TECHNOLOGY CO.,LTD.
USA Customer Service / Tech Support Manager TEL: +1 626 964 0055, +1-877-414-7993 Email: usatechsupport@aee.com Http: //www.aeeusa.com 661 Brea Canyon Rd. Suite#6 Walnut, CA.