NAV102 Installation and Operation Manual Manual de Instruccionnes de Instalaci6n y Operaci6n Instructions d'installation et d'operation 'r~I~1
~ NAV102 CONTENTS Thank you for choosing a Jensen product. We hope you will find the instructions in this owner's manual clear and easy to follow. If you take a few minutes to look through it, you'll learn how to use all the features of your new Jensen NAV102 navigation system for maximum enjoyment.
~ NAV102 with NavMate INTRODUCTION Horizon NavMate Navigation / Tele Atlas Map Data We hope that you enjoy using your new Jensen NAV102 navigation system. This manual is designed to help you get the most out of your system. This navigation system leads you straight to your destination.
<[§!D NAV102 with NavMate SAFETY INFORMATION User Agreement I. Traffic congestion. While every attempt is made to ensure that the database is accurate, roadways, points of interest, and business and service locations may change over time. Do not use the NAV102 to navigate to a police station, hospital, etc. in an emergency. Call 911 for assistance. Laws in some states prohibit wearing stereo headphones or may prohibit use or placement of a navigation device while operating a motor vehicle.
~ NAV102 with NavMate BASIC OPERATION Head Unit Button Functions Using the Keyboard Accessing the Navigation Software Keyboard Command Buttons Press the SRC button and select the NAV icon to access navigation mode. Table 1: Keyboard Command Buttons Selecting / Listening to a Source while Navigating While navigating, other sources may be selected and listened to such as AM-FM Tuner, CD, etc.
~ NAV102 with NavMate Table 2: Common Command Buttons NOTE: On the keyboard screen, the "SPACE" button is located in the bottom center of the screen. Press the Space button to complete the search for entries with more than one word. For example, to locate Lake Mary, enter "Lake_" and then the "M" will become available for selection. Press the return icon on any screen to return to the previous screen. Press the Menu icon to access the Main Menu.
~ NAV102 with NavMate Go To...: Choose your destination by searching for an address, choosing an entry from the POI (point of interest) directory, selecting a location from the map, or by choosing a destination from a saved list of recently visited locations or favorites (see "Selecting a Destination" on page 7). Setup: Configure your navigation to suit your needs. Define general settings (e.g. time, language, or system of measurement), configure your map (e.g.
~ NAV102 with NavMate 2D/3D/SpHtScreen Press the "i" icon to view detailed readings for each field. During navigation or map browsing, you can click t h e . button to switch between 2D (default), 3D and Split Screen map views. Press the blue 1\ / V arrow buttons or use the scroll bar on the right side of the screen to navigate the list. rn/B Use the buttons to move through the list page by page. Touch the marked item to select it. Press the DVD Installation See separate insert for DVD installation.
~ NAV102 with NavMate IIIIIL SELECTING A DESTINATION State or Province There are five different ways to find and choose a destination. Some methods allow you to select from a list using the arrow keys, while others allow you to search using an on-screen keyboard. NOTE: If a route is in progress when you exit the NAV102 system, the unit will prompt "Do you want to resume guidance?" when you resume operation. Press the green check mark to resume or the "X" to cancel and go to the "Main Menu.
~ 4. Press the screen. NAV102 with NavMate Choosing a Location on the Map [Ltr_'_~-,~=-'_~l button to select the street number and access the "Start Route" Point of Interest 1. From the "Main Menu", press t h e . button. The "Map - Tracking" window will be displayed, indicating your last location: 2. Touch any part of the map area to enter browsing (panning) mode and navigate the map. Use the +/- buttons to zoom in/out.
~ NAV102 with NavMate 3. 4. ...l~'- 1. From the "Main Menu", select Go To.... 2. From the "Go To..." menu, select History. 3. A list of recent locations will appear on the screen. Press the l1;li button to view and select the address nearest the cross hair, or press Quick POI to locate a POI in the visible map area.
~ 4. NAV102 with NavMate Press to select a recent destination from the "History" list and view the "Start Route" screen. Press the blue AI V arrow buttons or use the scroll bar on the right side of the screen to navigate the list. Press the check mark to enter and save your home or office address. Choosing a Location from your Address Book 1. 0 8 5. 2. 3. Use the I buttons to move through the list page by page. Press the Garbage Can icon to delete the highlighted item.
~ NAV102 with NavMate ~~ the ~. button to view the "Main Menu" (if not already doing so). Go To... Favorites. Trail Book to view a list of existing trails. 1. 2. 3. 4. Press Press Press Press 5. Press the Trail you would like to follow and a list of trail points will be displayed. 6. You can press to choose any Trail point as the stating point. Once a point is selected, the system will display a red dotted line from your current location to the starting point. 7.
~ NAV102 with NavMate SELECTING A POINT OF INTEREST From the main menu, press the Go To... button and then press the Point of Interest button. The "Point of Interest" window will be displayed: Use the 2. ~p;1 I~ II':,.J buttons to move through the list page by page. I"" Click an item on the list to select that category OR press the' access the keyboard and enter a category directly. ~ , j button to City 1. Press the City button to enter the city in which you would like to find a point of interest.
~ NAV102 with NavMate Press the blue 1\ / V arrow buttons or use the scroll bar on the right side of the screen to navigate the list. 3. ~p;I L:I/ 8 /8 3. Use the buttons to move through the list page by page. Press to select a POI destination and access the "Start Route" screen. Use the ,~ buttons to move through the list page by page. Press to select a POI destination and access the "Start Route" screen.
~ r' I~ NAV102 with NavMate Press the screen. 3. Determine map indicators and settings for your new Category. Set Icons Shown: Press to select the marker that will represent POI destinations in your new Category. Sound: Press to select a sound to be heard when you are nearing the destination (based on Distance). Distance: Press to choose the distance from the destination at which you would like the chosen sound to be played.
~ NAV102 with NavMate I 2. 3. 4. 5. r II R • [Ill' Refer to information in the section titled "Selecting a Destination" on page 7 to locate a destination. After entering a destination address, the "Edit" screen appears. Tn Edit My POI List To edit items on your My POI list, press the following sequences of menu buttons: Go To... > Favorites> Edit Favorites> My POI> Edit from the "Main Menu". Add additional information about your POI: Press the address box to edit name of your POI.
_I ~ NAV102 with NavMate L £1 L AadL 4 db UiL NAVIGATING The powerful navigation capabilities of your NAV1 02 will guide you along the shortest or quickest route from A to B - with voice commands and in 3D (optional). Route Interruptions If you intentionally or accidentally leave the current route, the NavMate software will automatically recalculate the route and prompt you to get back on track to your destination. To begin navigation, select a location using the Go To...
NAV102 with NavMate II ~ ,, DlIEIl 1F Ii!'" UIIF III! 1£ ~ To add a Detour while navigating, press the . ..,.", button to return to the "Main Menu" and then press Edit Route. 2. Press Detour to view the "Detour" screen. When you are near your destination, the destination is indicated by a checkered flag symbol. A voice prompt will announce that you are approaching your destination. Detour Distance Avoid Specific Road 3. 4. 11_ Arriving at your Destination ....• .-- 1.
~ NAV102 with NavMate 7 MANAGING FAVORITES Edit Address Book The "Edit Favorites" menu allows you to save your home and work locations, as well as other frequent destinations for easy recall. After entering an address or searching for a POI, you can choose the Save option to bookmark your selection, eliminating the need to perform repeated searches. The "Address Book" feature allows you to store and edit address book entries. To edit your address book, perform the following steps: 1. 2.
~ NAV102 with NavMate 2. Edit Home/Office Address 1. On the "Edit Favorites" menu, press the Home Address or Office Address icon to add or replace the home or office address. A window like the following will appear: Press the Add button to create a new Trip or the Edit button to edit an eXisting Trip. Add New Trip 1. After pressing the Add button, use the on-screen keyboard to enter a name for your trip. 2.
~ NAV102 with NavMate ., 1 Press the screen. 2. [",",~ l 3. Press to highlighted a Trip and view the destination screen for your trip. 4. Use the buttons at the bottom of the screen to make changes to you trip destinations or to add a new destination. Touch to highlight a destination. Press the pencil icon to rename the highlighted destination. Press the garbage can icon to delete the highlighted destination from your trip. Press the green + icon to add an additional destination to your trip.
~ NAV102 with NavMate 1. 2. Create a New Trail To access the Trail Book function, press the Trail Book button on the "Edit Favorites" menu. After pressing the Add button to create a new trail, you will see the "Name Trail Book Entry" screen, shown below: Press the Add button to create a new Trail or the Edit button to edit an existing Trail. [r,.. ] 1. 2. Press the button to clear the default entry, if desired. Use the keyboard to enter the name for your Trail. (See "Using the Keyboard" on page 3.
~ . NAV102 with NavMate 117 ]11 ii2 7. ~ When finished, press the ~ button and then choose Stop Trail. 2. Press to highlight the Trail you want to modify. The "Edit" screen appears. 3. Press Color to choose from ten colors for your dotted line guidance. Press the desired color to apply that color and return to the "Edit" menu. 4. Press Waypoints to edit waypoints on your trail. Press to highlight a waypoint. Press the pencil icon to edit the name of the waypoint.
~ NAV102 with NavMate Delete Trail 1. To edit an existing trail press the following sequences of menu buttons: Go To... > Favorites > Edit Favorites> Trail Book> Edit from the "Main Menu". 2. 3. 4. Press to highlight the trail you want to delete. Press the garbage can icon to delete the highlighted trail. Press the green check mark to confirm deletion. Set Up Trail Display 1. To set a map scale display preference for trails, press the Setup Display option on the "Trail Book" screen. 23 2.
~ NAV102 with NavMate SETUP MENU When using the NAV102 for the first time, it is recommended that you customize the system parameter settings. For example, regarding navigation, you can choose to avoid or allow toll roads or ferries or change your map orientation. You can also edit display settings, including the display of on-screen navigation icons. Auto Recalculation: Automatically recalculate the route if a wrong turn is made. Voice Guidance: When on, the system will give voice prompts.
NAV102 with NavMate - ~ Voice Guidance Day/Night Settings Press to choose from the following available languages for voice guidance: From the Day/Night Settings menu, press to select Day or Night mode, shown below. Press Auto. to allow the mode to be chosen automatically based on the time of day. English USA - Dave English USA - Rebecca Set Time Your clock time must begin with 1, 2 or O.
<[~~!D NAV102 with NavMate System Volume From the "System" menu, select Volume to modify the volume of voice commands. Press the + button to increase the volume. Press the - button to decrease the volume. Press the SOUND Mute button to silence or resume the voice command volume. GPS Diagnostics View satellite information for diagnostic use, including the number of satellites currently in view and how many are being used. You can also view the GPS time along with the current latitude and longitude.
~ NAV102 with NavMate TROUBLESHOOTING Table 1: Troubleshooting Corrective Action Cause Problem I can't find an address Address spelled incorrectly Please make sure you have correctly spelled your entry. If you do not know how an address is spelled, simply enter the parts of the address about which you are certain - e.g. "Brook" for Brooklyn in New York. Then browse the results list and look for the address. Also make sure that the city in which you are looking for an address is correct.
~ NAV102 with NavMate 28
Limited Warranty Audiovox Electronics Corporation ("the Company") is committed to quality and customer service, and are pleased to offer you this Warranty. Please read it thoroughly and contact the Company at 1-800323-4815 with any questions. Who is covered? The Company extends this warranty to the original retail purchaser of products purchased through an authorized Audiovox retailer in the U.S.A., Puerto Rico or Canada. This warranty is not transferable or assignable.
Garantia Limitada Audiovox Electronics Corporation (uta Compania) es una corporacion comprometida con la catidad y et servicio at cliente, y se complace en ofrecerte esta Garantia. Por favor, leata completamente y contacte a la Compania aI1-800·323-4815 por cuatquier duda. i,Quien esta cubierto? La Compania extiende esta garantia al comprador minorista original de los productos comprados a un distribuidor Audiovox autorizado en USA, Puerto Rico 0 Canada. Esta garantia no es transferible 0 asignable.
Garantie Limitee Audiovox Electronics Corporation (Ia Societe) s'engage it la qualite et au service des clients, et est content de vous offrir cette garantie. Nous vous prions de Ie lire attentivement et prendre contact avec la Societe au 1·800·323-4815 avec des questions. Qui est couvert ? La Societe etend cette garantie a I'acheteur d'origine en detail des produits achetes a un detaillant autorise d'Audiovox aux Etats-Unis, Puerto Rico ou Canada. Cette garantie ne peut pas etre transferee ni alienee.
If It's too LOUDYOll're too OLD! Audiovox Electronics Corporation Hauppauge, NY 11788 Technical Assistance: 1-800-323-4815 www.jensen.com © 2009 Audiovox Ver.
i i " J'~ " ..... _- I" .~ ~ Parts List NAV102 Placement ./ NAV102 navigation module ./ Antenna with magnetic mount ./ Four rubber feet (to affix to the bottom of the NAV102 in the recessed area near each corner) ./ SmartBus cable (used to connect the NAV102 to the Jensen navigation-ready radio) ./ One 2 Gigabyte SO Card pre loaded with map/navigation software ./ Two 11 mm (.4in) screws (for fastening the SmartBus cable to the radio and NAV102) .
~ NAV102 Wiring Diagram Insert one end of the Smartbus cable into the "DATA BUS" slot on the side of the NAV102 and secure it with a 11mm (Ain) screw (provided). Connect the other end of the cable to the NAV102 input on the back of your Jensen navigation-ready head unit. Secure Smartbus Cable with 11mm (Ain) Screw ~ (;}a~ 0 c:=:J ~ef) 1r:::::::JI @: 1.0 DIN Head Unit =0 c=J@ @ v Where applicable, secure the cable to the radio using a 11mm (.4in) screw. = = 0 ll=] ..
Featuring: Horizon NavMate GPS Software Tele Atlas Map Data 11 million POI (Point Of Interest) Speed Sensitive Zoom Female/Male TTS Voice Guidance Female/Male Recorded Voice Guidance Turn by Turn Voice Guidance Samsung S3C2440 (ARM9) 400MHz Processor
• <~ • ....•. ~F!~TANTI B~loreyOu b~in, youm~ > ,:·seftfll!.$yste~m tirneand ,t;tefa",llloc~tiqnto", :", ,;:;t',/i,t . .•••.. ,.·.(i • • • e.,••~.·CJ.~e . ·ac::cL.lr.~e, . n avlgatiol1.. res,"'.lt~:···· • . . ' ~"'.>::,,:,:',:<:,',:'~,"> "~:':"'::,!:< ',' ''':<.' :,:'~ .::".," "'S'ET TIME' . ....: .... .',,' ",;., . , .' l)se,lhs:Jollowing; s,equence of commap~$to set'the:tift1tt:, ; · , .. ' :'~,Maih?Mf:lnu> Setup >:User Prelf!rences'> Set 'Time' >(l1se'~"' <'" ... keypad ito enler time) > ..
Introduction to GPS Navigation The NAV102 is a vehicle GPS (Global Positioning System)-based navigation device which utilizes digital map data to guide you from your selected location A to location B, using location information obtained from a Global Navigation Satellite System (GNSS).
Key Features Automatic Re-routing Your NAV1 02 will automatically recalculate and indicate how to continue to your destination if you miss a turn or depart from the original guided route. Turn by Turn Mode When selected, the navigation system displays turn-by-turn information on the screen instead of the map. To view turn-by-turn information while navigating, press the "next maneuver arrow" on the top left corner of the map screen to view a turn-by-turn list of upcoming maneuvers.
Safety Information Follow these rules to prevent accidents that can result in injury or death: • The driver should operate the device only when the vehicle is stopped. Only a vehicle passenger should operate the device while the vehicle is moving. When driving, the need to view the display is minimal. Voice prompts will guide you to your destinations. • It is your responsibility to comply with all traffic laws. • The NAV102 is designed to assist you in the process of reaching your destination.
Head Unit Button Functions Press the SRC button and select the NAV icon to access navigation mode. While navigating, other sources may be selected and listened to such as AM-FM Tuner, CD, etc. To listen to another source while navigating, press the SRC button and then select a source from the Source Menu. Navigation voice prompts will be heard automatically, although the navigation map cannot be seen.
Navigation Screen Indicators Distance to Destination Next Maneuver Next TurnlJunctionl Exit Number Time Before Next Maneuver Repeat Voice Prompt Estimated Arrival Time Zoom In Press for 201 iIIl:iIIkt-- 3 DIS Plit Screen View Mute Voice Prompts ""'''''',--- Map Location Menu Button - __~ Current Location Current Position Business Icons
Keyboard Command Buttons Press to clear your selection and start over. Press to switch to City entry. Press to switch to Postal (Zip) Code entry. ] @S% Press to add a space when entering a multi-word location. When applicable, the specials button appears to the left of the space button, allowing you to complete your entry of a business name. Press to view the special characters keyboard. Press to confirm entry and begin navigation. Press to return to the previous screen.
Using the Main Menu The main menu is your central point of access to all functions of your NAV1 02. It allows you to set your destination, manage your favorites and control all settings of your device. The "Main Menu" consists of the following options: • • • • • Home Address: Return to Home Address. Go To...
User Preference Settings Use the following sequence of commands to select the appropriate Language, Time Zone, Distance Units and Voice Guidance voice: 1. Language: Main Menu> Setup > User Preferences> Language Settings> (select language) 2. Set Time: Main Menu> Setup> User Preferences> Set Time> (use keypad to enter time) > ./ 3. Distance Units: Main Menu> Setup> User Preferences> Distance Units Setup> (select unit of measurement) 4.
Find and Navigate to Destination Before navigating, you must first select the current state or province. To perform this task, select Go To ... > State or Province from the "Main Menu". 1. State a. Use the keypad to begin entering your State or Province name. b. Press to highlight a State name or type the full name. c. Press./ to select the State or Province and return to the "Go To ..." screen. To choose an address, select Go To ... > Address or Intersection from the "Main Menu". 1. City a.
Find and Navigate to Destination (continued) 2. Street a. Use the keypad to enter the Street name. c. Once the Street name is recognized, you will automatically be prompted for the street Number. NOTE: Always use the primary street name. For example, do not enter East or E or North or N. 3. Number a. Use the keypad to enter the Street number. b. Press'/ to select the Street number and access the "Start Route" screen. Press Start Route to begin navigating to the chosen destination.
Find and Navigate to Point of Interest (POI) To navigate to a point of interest, begin by selecting Go To ... > Point of Interest from the "Main Menu". Complete the POI search as follows: 1. Choose the search criteria for your POI search. a. State or Province: The previously selected State or Province is automatically selected for the POI search. Press the State or Province button to select a different State or Province. b.
Adding a Detour If you are unable to complete the route as calculated, you can add a Detour to the route that will allow you to stay on track to your destination. To add a detour while navigating, perform the following steps: t'3J Detour Avoid Next Road Detour Distance Avoid Specific Road 1. Press the button to return to the "Main Menu". 2. Press Edit Route. 3. Press Detour to view the "Detour" screen. 4. Choose a parameter for the Detour from the on-screen list. 5.
Frequently Asked Questions How do I synchronize my information clock to the navigation clock? Drive your vehicle to an open area where the GPS signal can be clearly received and park. With the ignition on, verify that the "GPS" indicator shows at least 6 (GPS [6]) satellites. It may take up to 5 minutes to establish the first connection.
Frequently Asked Questions (continued) Why is my GPS signal intermittent? Be sure your antenna has a clear path to the sky with the best location being on the top of the car. Because many modern vehicles have a metallic coating on the front windshield, the dash is not an good location for the GPS antenna. The GPS antenna is not designed to work indoors or in a garage. The GPS antenna should be outside for best performance.
if it's too LO • you're too OLD! QENSEN~ Audiovox Electronics Corporation Hauppauge, NY 11788 www.jensen.com © 2009 Audiovox v.
FREE MP3s +1 FREE AUDIOBOOK • Choose from over 4 Million songs and over 4,000 top-selling audiobooks • Free Trial Offer-No Risk! • ORM~free tracks-Burn COs for your car and home stereo • Transfer your songs to your RCA Player or any device that plays MP3s • eMusic songs do not expire - EVER! te n ... emusic.
Vlc(orvTechJlo!rwies .. ,,~ INSTALLATION .:i.:". excellence ~~~ Three easy steps! 1. Visit www.jensen.com. 2. Click on the Victory Technology Installation Excellence Logo as shown above. 3. Enter your product serial number (example: xxxx_xxxxxxx_xx). - -,-- 4.
•