User's Manual

Quick Start Guide
DLT-V4108 Industrial PC
 DLoG GmbH, 2016
Quick Start Guide DLT-V4108, V001 PN:2005410820
1 / 15
1
Introduction – for your safety
 Read and observe the quick start
guide carefully.
 Keep for future reference.
 Read and observe the accompanying
“DLT-V4108 Safety Instructions”
carefully.
 Go to www.advantech-dlog.com for
detailed manuals, e.g. “DLT-V4108
Manual” and “MDevice Manual”.
Figure: DLT-V4108 Industrial PC
DANGER
Observe the intended use.
Observe the intended use of DLT-V4108, e.g.: no use in EX zone (potentially explosive) and on ships, no
use in life-supporting systems or security-critical facilities.
Observe the required qualification.
This quick start guide is intended for qualified skilled personnel. Only skilled personnel may transport,
store, commission and maintain the DLT-V4108. Qualified and skilled personnel referred in this quick start
guide are persons who are familiar with these processes and have the corresponding qualifications for
their activities.
Hazardous voltage, electric shock from contact with live parts.
 Do not put DLT-V4108 into operation if it is damaged.
 Do not open or modify DLT-V4108.
 Only connect or disconnect electrical connections when the device is in a de-energized state
(electrically dead)
 Operators of the DLT-V4108 must be trained in the handling of the device.
 DLT-V4108 is intended to be supplied by DC power source, rated _9-60 Vdc, 5 A minimum and
Tma _45 degree C maximum, if need further assistance, please contact Advantech for further
information."
Users must be trained / instructed.
Users of the DLT-V4108 must be trained by skilled personnel and instructed about the operation of the
device.