User Manual Document Document Title Advantech UHF RFID ART-320 Tracer Module Doc. No. Model Ver. 1.0 ART-320 Doc. Ver. Issue Date 1.
User Manual Document Document Title Advantech UHF RFID ART-320 Tracer Module Doc. No. Model Ver. 1.0 ART-320 Doc. Ver. Issue Date 1.0 10/31/2011 Page 2 of 13 1 SCOPE .................................................................................................................................................................3 2 THE LIST OF REFERENCES: ........................................................................................................................5 3 ABBREVIATED TERMS .
User Manual Document Document Title Advantech UHF RFID ART-320 Tracer Module Doc. No. Model Ver. 1.0 ART-320 Doc. Ver. Issue Date 1.0 10/31/2011 Page 3 of 13 1 Scope Radio Frequency Identification (RFID) has been included in the 21st century one of the 10 major technologies. RF is the automatic identification object recognition technology.
User Manual Document Document Title Advantech UHF RFID ART-320 Tracer Module Doc. No. Model Ver. 1.0 ART-320 Doc. Ver. Issue Date 1.0 10/31/2011 --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help.
User Manual Document Document Title Advantech UHF RFID ART-320 Tracer Module Doc. No. Model Ver. 1.0 ART-320 Doc. Ver. Issue Date 1.0 10/31/2011 2 The list of references: Item 1 2 Referances EPC Class-1 Generation-2 UHF RFID version 1.1.
User Manual Document Document Title Advantech UHF RFID ART-320 Tracer Module Doc. No. Model Ver. 1.0 ART-320 Doc. Ver. Issue Date 1.0 10/31/2011 Page 6 of 13 4 System Specification Reader is mainly used to read the materials from tag to carry on the work of distinguishing of the things with PDA or the cell-phone. When PDA or the cell-phone assigns the order for Reader, reader will transmit RF wave with data out through antenna.
User Manual Document Document Title Advantech UHF RFID ART-320 Tracer Module 4.1 Doc. No. Model Ver. 1.0 ART-320 Doc. Ver. Issue Date 1.0 10/31/2011 Page 7 of 13 System Structure The Fig 4-2 and Fig 4-3 show between the hardware configuration and user interface of the ART-320. There are five parts of PDA or the cell-phone for system structures that are including the power, digit, radio frequency, base and FW respectively. Fig 4-2.
User Manual Document Document Title Advantech UHF RFID ART-320 Tracer Module Watchdog Doc. No. Model Ver. 1.0 ART-320 UART Rx, Tx Doc. Ver. Issue Date 1.0 10/31/2011 Page 8 of 13 ADC Power Control System Manage Timer TimeOut Control External Interrupt Command Handle EEPROM EPC Class-1 GEN-2 Command Handle RF Control TAG Reply Manage PIE Generator PWM Fig 4-3. Micro-Control Unit Block Diagram 4.1.
User Manual Document Document Title Advantech UHF RFID ART-320 Tracer Module Doc. No. Model Ver. 1.0 ART-320 Doc. Ver. Issue Date 1.0 10/31/2011 Page 9 of 13 4.1.2 The Interface of Power Supplies The power system is offered 3.3V by ART-320 interface of PDA or the cell-phone with Max. 2A. 3.3V-5.2.5 (1) ：The microprocessor and UART using. 3.3V-5.2.5 (2) ：ISM RF transceiver using. 3.3V-5.2.5 (3) ：Power Amplify using 4.1.
User Manual Document Document Title Advantech UHF RFID ART-320 Tracer Module Doc. No. Model Ver. 1.0 ART-320 Doc. Ver. Issue Date 1.0 10/31/2011 Page 10 of 13 Fig 4-4. Pin Out for ART-320 Fig 4-5. Photograph of ART-320 4.1.4 Module Operation The ART-320 is a dual-antenna reader module. The backscatter signal is demodulated to baseband through a standard mixer stage and is filtered and amplified. The baseband signal is then sampled and processed by a microcontroller.
User Manual Document Document Title Advantech UHF RFID ART-320 Tracer Module Doc. No. Model Ver. 1.0 ART-320 Doc. Ver. Issue Date 1.0 10/31/2011 Page 11 of 13 fraction of a second that is required to read the tags in the field. A block diagram of module is given in Fig 4-6. Fig 4-6. ART-320 Block Diagram 4.1.5 Interfacing with ART-320 The ART-320 is designed to interface with another circuit board and communicate using a simple 3-wire serial interface.
User Manual Document Document Title Advantech UHF RFID ART-320 Tracer Module Doc. No. Model Ver. 1.0 ART-320 Doc. Ver. Issue Date 1.0 10/31/2011 Page 12 of 13 4.1.6 Starting Windows Demo Program After installing the demo program, you can connect the reader to the computer using a serial cable (standard DB9 connectors). Please make sure that you have an antenna connected to the reader. The program supplied with the kit is able to interface to all the RFID readers made by Advantech.
.105 Class B digital device or This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
