User's Manual

ManualsBrandsAdvantech ManualsElectronicsComputer





ARK-1123H

Computer

Startup

Manual

Before you begin installing your card, please make sure that the following items have been shipped:

ARK-1123H

　 1 x ARK-1123H unit

　 1 x Chinese user manual

　 1 x China RoHS

　 1 x 2 years warranty card

1 x power adapter

If any of these items are missing or damaged, please contact your distributor or sales representative immediately.

Note 1: For detailed contents of ARK-1123H, please refer to information on the enclosed CDROM (in PDF format).

Note 2: Acrobat Reader is required to view any PDF file. Acrobat Reader can be downloaded at:

http://www.adobe.com/Prodindex/acrobat/readstep.

html/ (Acrobat is a trademark of Adobe.)

ARK‐1123H,ARK‐1123H‐U0A1E,ARK‐1123XXXXXXXXXXXXXXXX(where“X”may

beanyalphanumericcharacter,“‐”orblank)



FCCID:M82‐ARK1123



For more information on this and other Advantech

products, please visit our website at:

http://www.advantech.com

http://www.advantech.com/epc

For technical support and service, please visit our

support website at:

http://service.advantech.com.tw/eservice/

This manual is for the ARK-1123 series Rev. A

1st Edition,

Packing List

Summary of content (7 pages)

PAGE 1
ARK-1123H Computer Startup Manual Packing List Before you begin installing your card, please make sure that the following items have been shipped: ARK-1123H 1 x ARK-1123H unit 1 x Chinese user manual 1 x China RoHS 1 x 2 years warranty card 1 x power adapter If any of these items are missing or damaged, please contact your distributor or sales representative immediately. Note 1: For detailed contents of ARK-1123H, please refer to information on the enclosed CDROM (in PDF format).
PAGE 2
ARK-1123 Specifications [ARK-1123H] WIFI card EWM-W161H01E EWM-W161H01E IEEE 802.11 a/b/g/n PCIE WIFI and Bluetooth 4.0 + BT3.0 HS class II combo Module. Dimensions 29.85mm x 26.65mm x 3.
PAGE 3
ARK-1123 Dimensions [ARK-1123H] Safety Instructions 1. Read these safety instructions carefully. 2. Keep this User Manual for later reference. 3. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning. 4. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible. 5. Keep this equipment away from humidity. 6. Put this equipment on a reliable surface during installation.
PAGE 4
14. If one of the following situations arises, get the equipment checked by service personnel: – The power cord or plug is damaged. – Liquid has penetrated into the equipment. – The equipment has been exposed to moisture. – The equipment does not work well, or you cannot get it to work according to the user’s manual. – The equipment has been dropped and damaged. – The equipment has obvious signs of breakage. 15.
PAGE 5
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 6
安全指示 1. 請仔細閱讀此安全操作說明。 2. 請妥善保存此用戶手冊供日後參考。 3. 用濕抹布清洗設備前，請從插座拔下電源線。請不要使用液體或去汙噴霧劑清洗設備。 4. 對於使用電源線的設備，設備周圍必須有容易接觸到的電源插座。 5. 請不要在潮濕環境中使用設備。 6. 請在安裝前確保設備放置在可靠的平面上，意外跌落可能會導致設備損壞。 7. 設備外殼的開口是用於空氣對流，從而防止設備過熱。請不要覆蓋這些開口。 8. 當您連接設備到電源插座上前，請確認電源插座的電壓是否符合要求。 9. 請將電源線佈置在人們不易絆到的位置，並不要在電源線上覆蓋任何雜物。 10. 請注意設備上的所有警告標識。 11. 如果長時間不使用設備，請將其同電源插座斷開，避免設備被超標的電壓波動損壞。 12. 請不要讓任何液體流入通風口，以免引起火災或者短路。 13. 請不要自行打開設備。為了確保您的安全，請由經過認證的工程師來打開設備。 14. 如遇下列情況，請由專業人員來維修： a. 電源線或者插頭損壞； b. 設備內部有液體流入； c. 設備曾暴露在過於潮濕的環境中使用； d.
PAGE 7
Safety Instructions Follow these simple precautions to protect yourself from harm and the products from damage. 1. To avoid electrical shock, always disconnect the power from your PC chassis before you work on it. 2. For the sake of the equipment, disconnect power before making any configuration changes. The sudden rush of power as you connect a jumper or install a card may damage sensitive electronic components. 3. Electronic components are also vulnerable to damage by electrostatic discharge.